参数资料
| 型号： | AD7763BSVZ |
| 厂商： | Analog Devices Inc |
| 文件页数： | 10/33页 |
| 文件大小： | 0K |
| 描述： | IC ADC 24BIT SRL 625KSPS 64TQFP |
| 标准包装： | 1 |
| 位数： | 24 |
| 采样率（每秒）： | 625k |
| 数据接口： | 串行，SPI? |
| 转换器数目： | 1 |
| 功率耗散（最大）： | 955.5mW |
| 电压电源： | 模拟和数字 |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 64-TQFP 裸露焊盘 |
| 供应商设备封装： | 64-TQFP-EP（10x10） |
| 包装： | 托盘 |
| 输入数目和类型： | 1 个差分，单极；1 个差分，双极 |
第1页第2页第3页第4页第5页第6页第7页第8页第9页当前第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页
Data Sheet
AD7763
Rev. B | Page 17 of 32
all FSO and SDI pins can be tied together and each device written
to individually by setting the appropriate address bits in the serial
32-bit word. The exception to this is when all devices can be written
to at the same time by setting the ALL bit to logic high.
Thus, if this bit is set to logic high, every device on the serial
bus accepts the data written, regardless of the address bits. This
feature is particularly attractive if, for example, four devices are
being configured with the same user-defined filter. Instead of
having to download the filter configuration four times, only one
write is required. See the Downloading a User-Defined Filter
section for further details.
Writing to AD7763 is allowed at any time, even while reading a
conversion result. Note that after writing to the devices, valid
data is not output until after the settling time for the filter has
elapsed. The DVALID status bit is asserted at this point to
indicate that the filter has settled and that valid data is available
at the output.
READING STATUS AND OTHER REGISTERS
The AD7763 features a number of programmable registers. To
read back the contents of these registers or the status register,
the user must first write to the control register of the device,
setting a bit corresponding to the register to be read. The next
read operation then outputs the contents of the selected register
instead of a conversion result.
To ensure that the next read cycle contains the contents of the
register that has been written to, the write operation to the register
in question must be completed a minimum of 8 × tSCO before
the falling edge of DRDY, which indicates the start of the next
read cycle.
More information on the relevant bits in the control register is
provided in the Registers section.
相关PDF资料 |
PDF描述 |
|---|---|
| AD7764BRUZ-REEL7 | IC ADC 24BIT S/D 312KSPS 28TSSOP |
| AD7765BRUZ-REEL7 | IC ADC 24BIT S/D 156KSPS 28TSSOP |
| AD7766BRUZ-RL7 | IC ADC 24BIT 128KSPS SAR 16TSSOP |
| AD7767BRUZ-RL7 | ADC 24BIT 15MW 128KSPS 16TSSOP |
| AD7776ARZ | IC ADC 10BIT 1CHAN HS 24SOIC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AD7763BSVZ-REEL | 功能描述:IC ADC 24BIT S/D 625KSPS 64-TQFP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1,000 系列:- 位数:12 采样率（每秒）:300k 数据接口:并联 转换器数目:1 功率耗散（最大）:75mW 电压电源:单电源 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:24-SOIC（0.295"，7.50mm 宽） 供应商设备封装:24-SOIC 包装:带卷 (TR) 输入数目和类型:1 个单端，单极；1 个单端，双极 |
| AD7764 | 制造商:AD 制造商全称:Analog Devices 功能描述:24-Bit, 8.5 mW, 109 dB, 128/64/32 kSPS ADCs |
| AD7764_07 | 制造商:AD 制造商全称:Analog Devices 功能描述:24-Bit, 312 kSPS, 109 dB ヒ-ツ ADC with On-Chip Buffers and Serial Interface |
| AD7764BRUZ | 功能描述:IC ADC 24BIT S/D 312KSPS 28TSSOP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1 系列:microPOWER™ 位数:8 采样率（每秒）:1M 数据接口:串行，SPI? 转换器数目:1 功率耗散（最大）:- 电压电源:模拟和数字 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:24-VFQFN 裸露焊盘 供应商设备封装:24-VQFN 裸露焊盘（4x4） 包装:Digi-Reel® 输入数目和类型:8 个单端，单极 产品目录页面:892 (CN2011-ZH PDF) 其它名称:296-25851-6 |
| AD7764BRUZ-REEL7 | 功能描述:IC ADC 24BIT S/D 312KSPS 28TSSOP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1,000 系列:- 位数:12 采样率（每秒）:300k 数据接口:并联 转换器数目:1 功率耗散（最大）:75mW 电压电源:单电源 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:24-SOIC（0.295"，7.50mm 宽） 供应商设备封装:24-SOIC 包装:带卷 (TR) 输入数目和类型:1 个单端，单极；1 个单端，双极 |
发布紧急采购，3分钟左右您将得到回复。