参数资料
| 型号： | AD7763BSVZ |
| 厂商： | Analog Devices Inc |
| 文件页数： | 19/33页 |
| 文件大小： | 0K |
| 描述： | IC ADC 24BIT SRL 625KSPS 64TQFP |
| 标准包装： | 1 |
| 位数： | 24 |
| 采样率（每秒）： | 625k |
| 数据接口： | 串行，SPI? |
| 转换器数目： | 1 |
| 功率耗散（最大）： | 955.5mW |
| 电压电源： | 模拟和数字 |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 64-TQFP 裸露焊盘 |
| 供应商设备封装： | 64-TQFP-EP（10x10） |
| 包装： | 托盘 |
| 输入数目和类型： | 1 个差分，单极；1 个差分，双极 |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页当前第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页
Data Sheet
AD7763
Rev. B | Page 25 of 32
DOWNLOADING A USER-DEFINED FILTER
As discussed in the Programmable FIR Filter section, each of
the filter coefficients is 27 bits in length: one sign bit and 26 magni-
tude bits. To download coefficients for a user-specific FIR filter, a
32-bit word is written to the AD7763 for each coefficient.
D31
D30
D29
D28
D27
D26
D[25:0]
ALL
ADR2
ADR1
ADR0
0
Sign
Magnitude
When a user writes coefficients to one device, the address of that
particular device (as assigned by the ADR[2:0] pins) must be
specified in the bits labeled ADR[2:0].
In a configuration where more than one device shares the same SDI
line, setting the ALL bit to logic high and leaving Address Bits
ADR[2:0] logic low enables the user to write each coefficient to all
devices simultaneously.
To ensure that a filter is downloaded correctly, a checksum must
be generated and downloaded following the download of the final
coefficient. The checksum is a 16-bit word generated by splitting
each 32-bit word into 4 bytes and summing all bytes from all
coefficients up to a maximum of 192 bytes (maximum number
of coefficients = 48 bytes × 4 bytes written for each coefficient).
The checksum is written to the device in the form of a 32-bit word
in the following format:
D31
D30
D29
D28
D[27:16]
D[15:0]
ALL
ADR2
ADR1
ADR0
0
Checksum
Note that when writing the checksum, the addressing requirements
are as before, and Bit 27 to Bit 16 are all set to 0.
The same checksum is generated internally in the AD7763 and
compared with the checksum downloaded. The DL_OK bit in
the status register is set if these two checksums agree.
To download a user-defined filter:
1. Write to Control Register 1, setting the DL Filt bit.
The correct Filter Length Bits FLEN[3:0] correspond
to the length of the filter about to be downloaded
(see Table 13) and the correct decimation rate.
2. Write the 32-bit word (as per format specified). The
first coefficient to be written must be the one adjacent
to the point of filter symmetry.
3. Repeat Step 2 for each coefficient.
4. Implement the checksum write as per the specified
format.
5. Use the following methods to verify that the filter
coefficients have been downloaded correctly:
Read the status register, checking the DL_OK bit.
Start reading data and observe the status of the
DL_OK bit.
Note that because the user coefficients are stored in RAM, they
are cleared after a RESET operation or a loss of power.
Table 13. Filter Length Values
FLEN[3:0]
Number of Coefficients
Filter Length
0000
Default
0001
6
12
0011
12
24
0101
18
36
0111
24
48
1001
30
60
1011
36
72
1101
42
84
1111
48
96
相关PDF资料 |
PDF描述 |
|---|---|
| AD7764BRUZ-REEL7 | IC ADC 24BIT S/D 312KSPS 28TSSOP |
| AD7765BRUZ-REEL7 | IC ADC 24BIT S/D 156KSPS 28TSSOP |
| AD7766BRUZ-RL7 | IC ADC 24BIT 128KSPS SAR 16TSSOP |
| AD7767BRUZ-RL7 | ADC 24BIT 15MW 128KSPS 16TSSOP |
| AD7776ARZ | IC ADC 10BIT 1CHAN HS 24SOIC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AD7763BSVZ-REEL | 功能描述:IC ADC 24BIT S/D 625KSPS 64-TQFP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1,000 系列:- 位数:12 采样率（每秒）:300k 数据接口:并联 转换器数目:1 功率耗散（最大）:75mW 电压电源:单电源 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:24-SOIC（0.295"，7.50mm 宽） 供应商设备封装:24-SOIC 包装:带卷 (TR) 输入数目和类型:1 个单端，单极；1 个单端，双极 |
| AD7764 | 制造商:AD 制造商全称:Analog Devices 功能描述:24-Bit, 8.5 mW, 109 dB, 128/64/32 kSPS ADCs |
| AD7764_07 | 制造商:AD 制造商全称:Analog Devices 功能描述:24-Bit, 312 kSPS, 109 dB ヒ-ツ ADC with On-Chip Buffers and Serial Interface |
| AD7764BRUZ | 功能描述:IC ADC 24BIT S/D 312KSPS 28TSSOP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1 系列:microPOWER™ 位数:8 采样率（每秒）:1M 数据接口:串行，SPI? 转换器数目:1 功率耗散（最大）:- 电压电源:模拟和数字 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:24-VFQFN 裸露焊盘 供应商设备封装:24-VQFN 裸露焊盘（4x4） 包装:Digi-Reel® 输入数目和类型:8 个单端，单极 产品目录页面:892 (CN2011-ZH PDF) 其它名称:296-25851-6 |
| AD7764BRUZ-REEL7 | 功能描述:IC ADC 24BIT S/D 312KSPS 28TSSOP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1,000 系列:- 位数:12 采样率（每秒）:300k 数据接口:并联 转换器数目:1 功率耗散（最大）:75mW 电压电源:单电源 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:24-SOIC（0.295"，7.50mm 宽） 供应商设备封装:24-SOIC 包装:带卷 (TR) 输入数目和类型:1 个单端，单极；1 个单端，双极 |
发布紧急采购，3分钟左右您将得到回复。