- 您现在的位置：买卖IC网 > PDF目录11477 > AD8109ASTZ (Analog Devices Inc)IC VIDEO CROSSPOINT SWIT 80LQFP PDF资料下载
参数资料
| 型号： | AD8109ASTZ |
| 厂商： | Analog Devices Inc |
| 文件页数： | 14/33页 |
| 文件大小： | 0K |
| 描述： | IC VIDEO CROSSPOINT SWIT 80LQFP |
| 标准包装： | 1 |
| 功能： | 视频交叉点开关 |
| 电路： | 1 x 8:8 |
| 电压电源： | 双电源 |
| 电压 - 电源，单路/双路(±)： | ±4.5 V ~ 5.5 V |
| 电流 - 电源： | 33mA |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 80-LQFP |
| 供应商设备封装： | 80-LQFP（12x12） |
| 包装： | 托盘 |
| 产品目录页面： | 801 (CN2011-ZH PDF) |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页当前第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页
AD8108/AD8109
Rev. B | Page 20 of 32
CREATING LARGER CROSSPOINT ARRAYS
The AD8108/AD8109 are high density building blocks for creating
crosspoint arrays of dimensions larger than 8 × 8. Various features,
such as output disable, chip enable, and gain-of-1 and-2 options,
are useful for creating larger arrays. For very large arrays, they
can be used along with the AD8116, a 16 × 16 video cross-point
device. In addition, systems that require more inputs than
outputs can use the AD8110 and/or the AD8111, which are
(gain-of-1 and gain-of-2) 16 × 8 crosspoint switches.
The first consideration in constructing a larger crosspoint is to
determine the minimum number of devices required. The 8 × 8
architecture of the AD8108/AD8109 contains 64 points, which
is a factor of 16 greater than a 4 × 1 crosspoint. The PC board
area and power consumption savings are readily apparent when
compared to using these smaller devices.
For a nonblocking crosspoint, the number of points required is
the product of the number of inputs multiplied by the number
of outputs. Nonblocking requires that the programming of a
given input to one or more outputs does not restrict the
availability of that input to be a source for any other outputs.
Some nonblocking crosspoint architectures will require more than
this minimum as calculated above. Also, there are blocking archi-
tectures that can be constructed with fewer devices than this
minimum. These systems have connectivity available on a statis-
tical basis that is determined when designing the overall system.
The basic concept in constructing larger crosspoint arrays is to
connect inputs in parallel in a horizontal direction and to wire-
OR the outputs together in the vertical direction. The meaning
of horizontal and vertical can best be understood by looking at
a diagram.
An 8 input by 16 output crosspoint array can be constructed as
shown in Figure 48. This configuration parallels two inputs per
channel and does not require paralleling of any outputs. Inputs are
easier to parallel than outputs because there are lower parasitics
involved. For a 16 × 8 crosspoint, the AD8110 (gain of 1) or
AD8111 (gain of 2) device can be used. These devices are
already configured into a 16 × 8 crosspoint in a single device.
8 INPUTS
IN 00–07
16 OUTPUTS
OUT 00–15
ONE
TERMINATION
PER INPUT
8
AD8108
OR
AD8109
AD8108
OR
AD8109
01068-048
Figure 48. 8 × 16 Crosspoint Array Using Two AD8108s (Unity Gain) or Two
AD8109s (Gain of 2)
Figure 49 illustrates a 16 × 16 crosspoint array, while a 24 × 24
crosspoint is illustrated in Figure 50. The 16 × 16 crosspoint
requires that each input driver drive two inputs in parallel and
each output be wire-OR’ed with one other output. The 24 × 24
crosspoint requires driving three inputs in parallel and having
the outputs wire-OR’ed in groups of three. It is required of the
system programming that only one output of a wired-OR node
be active at a time.
IN 00–07
00–07
08–15
IN 08–15
OUT 00–07
OUT 08–15
8
RTERM
8
× 8
8
× 8
8
× 8
8
× 8
01068-049
Figure 49. 16 × 16 Crosspoint Array Using Four AD8108s or AD8109s
IN 00–07
IN 08–15
IN 16–23
OUT 16–23
OUT 08–15
OUT 00–07
RTERM
8
× 8
8
× 8
8
× 8
8
× 8
8
× 8
8
× 8
8
× 8
8
× 8
8
× 8
RTERM
8
01068-050
Figure 50. 24 × 24 Crosspoint Array Using Nine AD8108s or AD8109s
At some point, the number of outputs that are wire-OR’ed
becomes too great to maintain system performance. This will
vary according to which system specifications are most
important. For example, a 64 × 8 crosspoint can be created with
eight AD8108/AD8109s. This design will have 64 separate
inputs and have the corresponding outputs of each device wire-
OR’ed together in groups of eight.
相关PDF资料 |
PDF描述 |
|---|---|
| PIC16C55A-20/P | IC MCU OTP 512X12 28DIP |
| AD75019JPZ | IC CROSSPOINT SWIT 16X16 44PLCC |
| SY58024UMG | IC CROSSPOINT SWITCH DUAL 32MLF |
| SY58040UMY | IC CROSSPOINT SWITCH 4X4 44MLF |
| PIC16F726-E/ML | IC PIC MCU FLASH 8KX14 28-QFN |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AD8109ASTZ | 制造商:Analog Devices 功能描述:Analog Crosspoint Switch IC |
| AD8109ASTZ2 | 制造商:AD 制造商全称:Analog Devices 功能描述:325 MHz, 8 ?? 8 Buffered Video Crosspoint Switches |
| AD8109-EB | 制造商:Analog Devices 功能描述:Evaluation Board For IC Video Cross PT 250MHz 8X8 制造商:Analog Devices 功能描述:VID CROSSPT 250MHZ 8X8 - Bulk 制造商:Rochester Electronics LLC 功能描述:AD8109 EVALUATION BOARD - Bulk |
| AD810ACHIPS | 制造商:Analog Devices 功能描述: |
| AD810AN | 功能描述:IC CURR-FDBK AMP VIDEO LP 8-DIP RoHS:否 类别:集成电路 (IC) >> 线性 - 放大器 - 视频放大器和频缓冲器 系列:- 标准包装:1,000 系列:- 应用:驱动器 输出类型:差分 电路数:3 -3db带宽:350MHz 转换速率:1000 V/µs 电流 - 电源:14.5mA 电流 - 输出 / 通道:60mA 电压 - 电源，单路/双路(±):5 V ~ 12 V，±2.5 V ~ 6 V 安装类型:表面贴装 封装/外壳:20-VFQFN 裸露焊盘 供应商设备封装:20-QFN 裸露焊盘（4x4） 包装:带卷 (TR) |
发布紧急采购，3分钟左右您将得到回复。