参数资料
型号: ADAU1701JSTZ-RL
厂商: Analog Devices Inc
文件页数: 22/53页
文件大小: 0K
描述: IC AUDIO PROC 2ADC/4DAC 48-LQFP
设计资源: Analog Audio Input, Class-D Output with ADAU1701, SSM2306, and ADP3336 (CN0162)
标准包装: 2,000
系列: SigmaDSP®
类型: 音频处理器
应用: 车载,监视器,MP3
安装类型: 表面贴装
封装/外壳: 48-LQFP
供应商设备封装: 48-LQFP(7x7)
包装: 带卷 (TR)
配用: EVAL-ADAU1701MINIZ-ND - BOARD EVAL SIGMADSP AUD ADAU1701
ADAU1701
Rev. B | Page 28 of 52
The writeback function writes data from the ADAU1701
interface registers to the second page of the self-boot EEPROM,
Address 32 to Address 63. Starting at EEPROM Address 26
(so that the interface register data begins at Address 32), the
EEPROM should be programmed with six bytes—the message
byte (0x01), two length bytes, the chip address (0x00), and the
2-byte subaddress for the interface registers (0x08 0x00). There
must be a message to the DSP core control register to enable
writing to the interface registers prior to the interface register
data in the EEPROM. This should be stored in EEPROM
Address 0. No-op messages (0x03) can be used in between
messages to ensure that these conditions are met.
The ADAU1701 writes to EEPROM Chip Address 0xA0. The
LSBs of the addresses of some EEPROMs are pin configurable; in
most cases, these pins should be tied low to set the address to 0xA0.
The maximum number of bytes that is written back from the
ADAU1701 is 35 (eight 4-byte interface registers plus three
bytes of EEPROM-addressing overhead). With SCL running at
384 kHz, the writeback operation takes approximately 73 μs to
complete after being triggered. Ensure that sufficient power is
available to the system to allow enough time for a writeback to
complete, especially if the WB signal is triggered from a falling
power supply voltage.
Table 19. EEPROM Message Types
Message ID
Message Type
Following Bytes
0x00
End
None
0x01
Write
Two bytes indicating message length followed by appropriate
number of data bytes
0x02
Delay
Two bytes for delay
0x03
No operation executed
None
0x04
Set multiple writeback
None
0x05
Set WB to falling edge sensitive
None
0x06
End and wait for writeback
None
0x01
0x00
0x05
0x00
0x08
0x1C
0x00
0x40
WRITE
LENGTH
DEVICE
ADDRESS
CORE CONTROL REGISTER
ADDRESS
CORE CONTROL REGISTER
DATA
0x01
0x001
0x61
0x00
0x04
0x00
WRITE
LENGTH
DEVICE
ADDRESS
PROGRAM RAM ADDRESS
PROGRAM RAM DATA
0x00
0x01
0x00
0xE8
0x01
PROGRAM RAM DATA
0x00
0x01
0x00
0x08
0x00
PROGRAM RAM DATA (CONTINUES FOR 332 MORE BYTES)
0x00
INTERFACE REGISTER DATA
0x00
INTERFACE REGISTER DATA
0x00
INTERFACE REGISTER DATA
0x00
INTERFACE REGISTER DATA
0x03
NO-OP BYTES
0x03
NO-OP BYTES
0x03
0x01
0x00
0x23
0x00
0x08
0x00
LENGTH
DEVICE
ADDRESS
INTERFACE REGISTER
ADDRESS
WRITE
NO-OP BYTES
06
41
2-
0
39
Figure 28. EEPROM Data Example
相关PDF资料
PDF描述
ADAU1702JSTZ-RL IC AUDIO PROC 2ADC/4DAC 48-LQFP
ADAV4601BSTZ IC AUDIO CODEC PROCESSOR 80-LQFP
ADAV4622BSTZ IC AUD PRO ATV/SIF DECODE 80LQFP
ADCLK846BCPZ-REEL7 IC CLK BUFFER 1:6 1.2GHZ 24LFCSP
ADCLK854BCPZ IC CLOCK BUFFER MUX 2:12 48LFCSP
相关代理商/技术参数
参数描述
ADAU1701MINIBZ 制造商:Analog Devices 功能描述:EVAL BD SIGMADSPMULTICHANAUDIO PROCESSOR - Bulk
ADAU1702 制造商:AD 制造商全称:Analog Devices 功能描述:SigmaDSP 28-56-Bit Audio Processor with Two ADCs and Four DACs
ADAU1702JSTZ 功能描述:IC AUDIO PROC 2ADC/4DAC 48-LQFP RoHS:是 类别:集成电路 (IC) >> 线性 - 音频处理 系列:SigmaDSP® 其它有关文件:STA321 View All Specifications 标准包装:1 系列:Sound Terminal™ 类型:音频处理器 应用:数字音频 安装类型:表面贴装 封装/外壳:64-LQFP 裸露焊盘 供应商设备封装:64-LQFP EP(10x10) 包装:Digi-Reel® 其它名称:497-11050-6
ADAU1702JSTZ-RL 功能描述:IC AUDIO PROC 2ADC/4DAC 48-LQFP RoHS:是 类别:集成电路 (IC) >> 线性 - 音频处理 系列:SigmaDSP® 其它有关文件:STA321 View All Specifications 标准包装:1 系列:Sound Terminal™ 类型:音频处理器 应用:数字音频 安装类型:表面贴装 封装/外壳:64-LQFP 裸露焊盘 供应商设备封装:64-LQFP EP(10x10) 包装:Digi-Reel® 其它名称:497-11050-6
ADAU1761 制造商:AD 制造商全称:Analog Devices 功能描述:SigmaDSP Stereo, Low Power, 96 kHz, 24-Bit Audio Codec with Integrated PLL