- 您现在的位置：买卖IC网 > PDF目录15925 > ADM1068ASTZ (Analog Devices Inc)IC SUPERVISOR/SEQUENCER 32-LQFP PDF资料下载
参数资料
| 型号： | ADM1068ASTZ |
| 厂商： | Analog Devices Inc |
| 文件页数： | 12/24页 |
| 文件大小： | 0K |
| 描述： | IC SUPERVISOR/SEQUENCER 32-LQFP |
| 标准包装： | 1 |
| 系列： | Super Sequencer® |
| 类型： | 序列发生器 |
| 监视电压数目： | 8 |
| 输出： | 可编程 |
| 电压 - 阀值： | 8 种可选阀值组合 |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 32-LQFP |
| 供应商设备封装： | 32-LQFP（7x7） |
| 包装： | 托盘 |
| 产品目录页面： | 788 (CN2011-ZH PDF) |
| 配用： | EVAL-ADM1068LQEBZ-ND - BOARD EVALUATION FOR ADM1068LQ |
ADM1068
The hysteresis value is given by
V HYST = V R × N THRESH /255
where:
V HYST is the desired hysteresis voltage.
N THRESH is the decimal value of the 5-bit hysteresis code.
Note that N THRESH has a maximum value of 31. The maximum
INPUT GLITCH FILTERING
The final stage of the SFDs is a glitch filter. This block provides
time-domain filtering on the output of the SFD comparators,
which allows the user to remove any spurious transitions such
as supply bounce at turn-on. The glitch filter function is in addition
to the digitally programmable hysteresis of the SFD comparators.
The glitch filter timeout is programmable up to 100 μs.
For example, when the glitch filter timeout is 100 μs, any pulse
appearing on the input of the glitch filter block that is less than
100 μs in duration is prevented from appearing on the output of
the glitch filter block. Any input pulse that is longer than 100 μs
appears on the output of the glitch filter block. The output is
delayed with respect to the input by 100 μs. The filtering
An additional supply supervision function is available when the
VXx pins are selected as digital inputs. In this case, the analog
function is available as a second detector on each of the dedicated
analog inputs, VPx and VH. The analog function of VX1 is
mapped to VP1, VX2 is mapped to VP2, and so on. VX4 is
mapped to VH. In this case, these SFDs can be viewed as secondary
or warning SFDs.
The secondary SFDs are fixed to the same input range as
the primary SFDs. They are used to indicate warning levels
rather than failure levels. This allows faults and warnings to
be generated on a single supply using only one pin. For
example, if VP1 is set to output a fault when a 3.3 V supply
drops to 3.0 V, VX1 can be set to output a warning at 3.1 V.
Warning outputs are available for readback from the status
registers. They are also OR’ed together and fed into the SE,
allowing warnings to generate interrupts on the PDOs.
Therefore, in this example, if the supply drops to 3.1 V, a
warning is generated, and remedial action can be taken before
the supply drops out of tolerance.
VXx PINS AS DIGITAL INPUTS
As discussed in the Supply Supervision with VXX Inputs section,
the VXx input pins on the ADM1068 have dual functionality.
INPUT PULSE SHORTER
THAN GLITCH FILTER TIMEOUT
PROGRAMMED
TIMEOUT
INPUT
INPUT PULSE LONGER
THAN GLITCH FILTER TIMEOUT
PROGRAMMED
TIMEOUT
INPUT
The second function is as a digital logic input to the device.
Therefore, the ADM1068 can be configured for up to four digital
inputs. These inputs are TTL-/CMOS-compatible. Standard logic
signals can be applied to the pins: RESET from reset generators,
PWRGD signals, fault flags, manual resets, and more. These
signals are available as inputs to the SE and, therefore, can be used
to control the status of the PDOs. The inputs can be configured
to detect either a change in level or an edge.
t 0
t GF
t 0
t GF
When configured for level detection, the output of the digital
block is a buffered version of the input. When configured for
edge detection, a pulse of programmable width is output from
the digital block, once the logic transition is detected. The width
OUTPUT
OUTPUT
is programmable from 0 μs to 100 μs.
The digital blocks feature the same glitch filter function that is
t 0
t GF
t 0
t GF
available on the SFDs. This function enables the user to ignore
Figure 16. Input Glitch Filter Function
SUPPLY SUPERVISION WITH VXx INPUTS
The VXx inputs have two functions. They can be used as either
supply fault detectors or as digital logic inputs. When selected as
analog (SFD) inputs, the VXx pins have functionality that is very
similar to the VH and VPx pins. The primary difference is that the
spurious transitions on the inputs. For example, the filter can be
used to debounce a manual reset switch.
When configured as digital inputs, each VXx pin has a weak
(10 μA) pull-down current source available for placing the input
into a known condition, even if left floating. The current source,
if selected, weakly pulls the input to GND.
VXx pins have only one input range: 0.573 V to 1.375 V.
Therefore, these inputs can directly supervise only the very low
supplies. However, the input impedance of the VXx pins is high,
VXx
(DIGITAL INPUT)
+
DETECTOR
GLITCH
FILTER
TO
SEQUENCING
ENGINE
allowing an external resistor divide network to be connected to
the pin. Thus, potentially any supply can be divided down into
the input range of the VXx pin and supervised. This enables the
ADM1068 to monitor other supplies, such as +24 V, +48 V,
and ?5 V.
Rev. C | Page 12 of 24
–
VREF = 1.4V
Figure 17. VXx Digital Input Function
相关PDF资料 |
PDF描述 |
|---|---|
| MAX6428BIUR+T | IC MONITOR BAT LP SOT23-3 |
| LTC692CS8#PBF | IC MPU SUPERVISORY CIRCUIT 8SOIC |
| LTC694CN8#PBF | IC MPU SUPERVISORY CIRCUIT 8-DIP |
| ADM8691ARWZ | IC SUPERVSR MPU 4.65V ADJ 16SOIC |
| M3CMK-5018R | IDC CABLE - MKC50K/MC50M/MCG50K |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ADM1068ASTZ-REEL7 | 功能描述:IC SEQUENCER/SUPERVISOR 32LQFP RoHS:是 类别:集成电路 (IC) >> PMIC - 监控器 系列:Super Sequencer® 标准包装:1 系列:- 类型:简单复位/加电复位 监视电压数目:1 输出:开路漏极或开路集电极 复位:高有效 复位超时:- 电压 - 阀值:1.8V 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:6-TSOP（0.059"，1.50mm 宽）5 引线 供应商设备封装:5-TSOP 包装:剪切带 (CT) 其它名称:NCP301HSN18T1GOSCT |
| ADM1069 | 制造商:AD 制造商全称:Analog Devices 功能描述:SUPER SEQUENCER-TM WITH MARGINING CONTROL AND AUXILIARY ADC INPUTS |
| ADM1069ACP | 制造商:Analog Devices 功能描述:FULL FEATURED MULTI POWER SUPPLY MARGINING SEQUENCER WITH LO - Bulk |
| ADM1069ACP-REEL | 制造商:AD 制造商全称:Analog Devices 功能描述:SUPER SEQUENCER-TM WITH MARGINING CONTROL AND AUXILIARY ADC INPUTS |
| ADM1069ACP-REEL7 | 制造商:AD 制造商全称:Analog Devices 功能描述:SUPER SEQUENCER-TM WITH MARGINING CONTROL AND AUXILIARY ADC INPUTS |
发布紧急采购，3分钟左右您将得到回复。