参数资料
型号: ADUC7060BCPZ32-RL
厂商: Analog Devices Inc
文件页数: 61/108页
文件大小: 0K
描述: IC MCU FLASH 24BIT 32KB 48LFCSP
设计资源: 4 mA-to-20 mA Loop-Powered Temperature Monitor Using ADuC7060/1 (CN0145)
Low power, Long Range, ISM Wireless Measuring Node (CN0164)
标准包装: 2,500
系列: MicroConverter® ADuC7xxx
核心处理器: ARM7
芯体尺寸: 16/32-位
速度: 10MHz
连通性: I²C,SPI,UART/USART
外围设备: POR,PWM,温度传感器,WDT
输入/输出数: 14
程序存储器容量: 32KB(16K x 16)
程序存储器类型: 闪存
RAM 容量: 1K x 32
电压 - 电源 (Vcc/Vdd): 2.375 V ~ 2.625 V
数据转换器: A/D 5x24b,8x24b,D/A 1x14b
振荡器型: 内部
工作温度: -40°C ~ 125°C
封装/外壳: 48-VFQFN 裸露焊盘,CSP
包装: 带卷 (TR)
ADuC7060/ADuC7061
Data Sheet
Rev. D | Page 56 of 108
DAC PERIPHERALS
DAC
The ADuC706x incorporates a voltage output DAC on chip. In
normal mode, the DAC resolution is 12-bits. In interpolation,
the DAC resolution is 16 bits with 14 effective bits. The DAC
has a rail-to-rail voltage output buffer capable of driving
5 k/100 pF.
The DAC has four selectable ranges.
0 V to VREF (internal band gap 1.2 V reference)
VREF to VREF+
ADC5/EXT_REF2IN to ADC4/EXT_REF2IN+
0 V to AVDD
The maximum signal range is 0 V to AVDD.
Op Amp Mode
As an option, the DAC can be disabled and its output buffer
used as an op amp.
MMR INTERFACE
The DAC is configurable through a control register and a data
register.
DAC0CON Register
Name:
DAC0CON
Address:
0xFFFF0600
Default value:
0x0200
Access:
Read and write
Table 63. DAC0CON MMR Bit Designations
Bit
Name
Description
15:10
Reserved.
9
DACPD
Set to 1 to power down DAC output (DAC output is tristated).
Clear this bit to enable the DAC.
8
DACBUFLP
Set to 1 to place the DAC output buffer in low power mode. See the Normal DAC Mode and Op Amp Mode
sections for further details on electrical specifications.
Clear this bit to enable the DAC buffer.
7
OPAMP
Set to 1 to place the DAC output buffer in op amp mode.
Clear this bit to enable the DAC output buffer for normal DAC operation.
6
DACBUFBYPASS
Set to 1 to bypass the output buffer and send the DAC output directly to the output pin.
Clear this bit to buffer the DAC output.
5
DACCLK
Cleared to 0 to update the DAC on the negative edge of HCLK.
Set to 1 to update the DAC on the negative edge of Timer0. This mode is ideally suited for waveform generation
where the next value in the waveform is written to DAC0DAT at regular intervals of Timer0.
4
DACCLR
Set to 1 for normal DAC operation.
Set to 0 to clear the DAC output and to set DAC0DAT to 0. Writing to this bit has an immediate effect on the DAC
output.
3
DACMODE
Set to 1 to enable the DAC in 16-bit interpolation mode.
Set to 0 to enable the DAC in normal 12-bit mode.
2
Rate
Used with interpolation mode.
Set to 1 to configure the interpolation clock as UCLK/16.
Set to 0 to configure the interpolation clock as UCLK/32.
1:0
DAC range bits
[11] = 0 V to AVDD range.
[10] = ADC5/EXT_REF2IN to ADC4/EXT_REF2IN+.
[01] = VREF to VREF+.
[00] = 0 V to VREF (1.2 V) range. Internal reference source.
相关PDF资料
PDF描述
AD7510DIKQ IC SWITCH QUAD SPST 16CDIP
LX256EV-5FN484I IC SWITCH DIGITAL 484FPBGA
LX256EV-35FN484C IC SWITCH DIGITAL 484FPBGA
LX256V-5FN484C IC SWITCH DIGITAL 484FPBGA
ATSAM3U1CB-CU IC MCU 64KB CORTEX-M3 100-TFBGA
相关代理商/技术参数
参数描述
ADUC7060BSTZ32 功能描述:IC MCU FLASH 24BIT 32KB 48LQFP RoHS:是 类别:集成电路 (IC) >> 嵌入式 - 微控制器, 系列:MicroConverter® ADuC7xxx 产品培训模块:MCU Product Line Introduction XMEGA Introduction AVR XMEGA USB Connectivity 标准包装:90 系列:AVR® XMEGA 核心处理器:AVR 芯体尺寸:8/16-位 速度:32MHz 连通性:I²C,IrDA,SPI,UART/USART 外围设备:欠压检测/复位,DMA,POR,PWM,WDT 输入/输出数:50 程序存储器容量:192KB(96K x 16) 程序存储器类型:闪存 EEPROM 大小:4K x 8 RAM 容量:16K x 8 电压 - 电源 (Vcc/Vdd):1.6 V ~ 3.6 V 数据转换器:A/D 16x12b; D/A 2x12b 振荡器型:内部 工作温度:-40°C ~ 85°C 封装/外壳:64-TQFP 包装:托盘 配用:ATSTK600-RC14-ND - STK600 SOCKET/ADAPTER 64TQFPATSTK600-TQFP64-ND - STK600 SOCKET/ADAPTER 64-TQFPATAVRONEKIT-ND - KIT AVR/AVR32 DEBUGGER/PROGRMMRATAVRISP2-ND - PROGRAMMER AVR IN SYSTEM
ADUC7060BSTZ32-RL 功能描述:IC ARM7 MCU FLASH 32K 48LQFP RoHS:是 类别:集成电路 (IC) >> 嵌入式 - 微控制器, 系列:MicroConverter® ADuC7xxx 标准包装:38 系列:Encore!® XP® 核心处理器:eZ8 芯体尺寸:8-位 速度:5MHz 连通性:IrDA,UART/USART 外围设备:欠压检测/复位,LED,POR,PWM,WDT 输入/输出数:16 程序存储器容量:4KB(4K x 8) 程序存储器类型:闪存 EEPROM 大小:- RAM 容量:1K x 8 电压 - 电源 (Vcc/Vdd):2.7 V ~ 3.6 V 数据转换器:- 振荡器型:内部 工作温度:-40°C ~ 105°C 封装/外壳:20-SOIC(0.295",7.50mm 宽) 包装:管件 其它名称:269-4116Z8F0413SH005EG-ND
ADUC7061BCPZ32 功能描述:IC MCU 16/32BIT 32KB 32LFCSP RoHS:是 类别:集成电路 (IC) >> 嵌入式 - 微控制器, 系列:MicroConverter® ADuC7xxx 标准包装:38 系列:Encore!® XP® 核心处理器:eZ8 芯体尺寸:8-位 速度:5MHz 连通性:IrDA,UART/USART 外围设备:欠压检测/复位,LED,POR,PWM,WDT 输入/输出数:16 程序存储器容量:4KB(4K x 8) 程序存储器类型:闪存 EEPROM 大小:- RAM 容量:1K x 8 电压 - 电源 (Vcc/Vdd):2.7 V ~ 3.6 V 数据转换器:- 振荡器型:内部 工作温度:-40°C ~ 105°C 封装/外壳:20-SOIC(0.295",7.50mm 宽) 包装:管件 其它名称:269-4116Z8F0413SH005EG-ND
ADUC7061BCPZ32-RL 功能描述:IC MCU 16/32BIT 32KB 32LFCSP RoHS:是 类别:集成电路 (IC) >> 嵌入式 - 微控制器, 系列:MicroConverter® ADuC7xxx 标准包装:38 系列:Encore!® XP® 核心处理器:eZ8 芯体尺寸:8-位 速度:5MHz 连通性:IrDA,UART/USART 外围设备:欠压检测/复位,LED,POR,PWM,WDT 输入/输出数:16 程序存储器容量:4KB(4K x 8) 程序存储器类型:闪存 EEPROM 大小:- RAM 容量:1K x 8 电压 - 电源 (Vcc/Vdd):2.7 V ~ 3.6 V 数据转换器:- 振荡器型:内部 工作温度:-40°C ~ 105°C 封装/外壳:20-SOIC(0.295",7.50mm 宽) 包装:管件 其它名称:269-4116Z8F0413SH005EG-ND
ADUC70SMARTLINKRL7 制造商:Analog Devices 功能描述: