参数资料
型号: AM29DL162DB90PCI
厂商: ADVANCED MICRO DEVICES INC
元件分类: PROM
英文描述: 1M X 16 FLASH 3V PROM, 90 ns, PBGA64
封装: 13 X 11 MM, 1 MM PITCH, FORTIFIED, BGA-64
文件页数: 13/56页
文件大小: 1752K
代理商: AM29DL162DB90PCI
20
Am29DL16xD
February 14, 2003
spurious system level signals during V
CC power-up
and power-down transitions, or from system noise.
Low VCC Write Inhibit
When V
CC is less than VLKO, the device does not ac-
cept any write cycles. This protects data during V
CC
power-up and power-down. The command register
and all internal program/erase circuits are disabled,
and the device resets to reading array data. Subse-
quent writes are ignored until V
CC is greater than VLKO.
The system must provide the proper signals to the
control pins to prevent unintentional writes when V
CC
is greater than V
LKO.
Write Pulse “Glitch” Protection
Noise pulses of less than 5 ns (typical) on OE#, CE#
or WE# do not initiate a write cycle.
Logical Inhibit
Write cycles are inhibited by holding any one of OE# =
VIL, CE# = VIH or WE# = VIH. To initiate a write cycle,
CE# and WE# must be a logical zero while OE# is a
logical one.
Power-Up Write Inhibit
If WE# = CE# = V
IL and OE# = VIH during power up,
the device does not accept commands on the rising
edge of WE#. The internal state machine is automati-
cally reset to reading array data on power-up.
COMMON FLASH MEMORY INTERFACE
(CFI)
The Common Flash Interface (CFI) specification out-
lines device and host system software interrogation
handshake, which allows specific vendor-specified
software algorithms to be used for entire families of
devices. Software support can then be device-inde-
pendent, JEDEC ID-independent, and forward- and
backward-compatible for the specified flash device
families. Flash vendors can standardize their existing
interfaces for long-term compatibility.
This device enters the CFI Query mode when the sys-
tem writes the CFI Query command, 98h, to address
55h in word mode (or address AAh in byte mode), any
time the device is ready to read array data. The sys-
tem can read CFI information at the addresses given
in Tables 10–13. To terminate reading CFI data, the
system must write the reset command.
The system can also write the CFI query command
when the device is in the autoselect mode. The device
enters the CFI query mode, and the system can read
CFI data at the addresses given in Tables 10–13. The
system must write the reset command to return the de-
vice to the autoselect mode.
For further information, please refer to the CFI Specifi-
cation and CFI Publication 100, available via the
World Wid e Web a t h ttp ://w ww.am d.co m/p ro d-
ucts/nvd/overview/cfi.html. Alternatively, contact an
AMD representative for copies of these documents.
Table 10.
CFI Query Identification String
Addresses
(Word Mode)
Addresses
(Byte Mode)
Data
Description
10h
11h
12h
20h
22h
24h
0051h
0052h
0059h
Query Unique ASCII string “QRY”
13h
14h
26h
28h
0002h
0000h
Primary OEM Command Set
15h
16h
2Ah
2Ch
0040h
0000h
Address for Primary Extended Table
17h
18h
2Eh
30h
0000h
Alternate OEM Command Set (00h = none exists)
19h
1Ah
32h
34h
0000h
Address for Alternate OEM Extended Table (00h = none exists)
相关PDF资料
PDF描述
AM29DL322GT70WMIN 2M X 16 FLASH 3V PROM, 70 ns, PBGA48
AM29DL324GB12PCI 2M X 16 FLASH 3V PROM, 120 ns, PBGA64
AM29DL324GT12WMIN 2M X 16 FLASH 3V PROM, 120 ns, PBGA48
AM29DL800BT70RSF 512K X 16 FLASH 3V PROM, 70 ns, PDSO44
AM29F032B-90SDB 4M X 8 FLASH 5V PROM, 90 ns, PDSO44
相关代理商/技术参数
参数描述
AM29DL163DB-90EI\\T 制造商:Spansion 功能描述:FLASH PARALLEL 3V/3.3V 16MBIT 2MX8/1MX16 90NS 48TSOP - Tape and Reel
AM29DL163DB-90EI\T 制造商:Spansion 功能描述:FLASH PARALLEL 3V/3.3V 16MBIT 2MX8/1MX16 90NS 48TSOP - Tape and Reel
AM29DL163DB-90EIT 制造商:Spansion 功能描述:FLASH PARALLEL 3V/3.3V 16MBIT 2MX8/1MX16 90NS 48TSOP - Tape and Reel
AM29DL163DT70EF 制造商:Spansion 功能描述:FLASH PARALLEL 3V/3.3V 16MBIT 2MX8/1MX16 70NS 48TSOP - Trays
AM29DL163DT-70EF 制造商:Spansion 功能描述: