- 您现在的位置：买卖IC网 > Datasheet目录394 > ANT-125K (RF Solutions)ANTENNA RFID COIL 125KHZ Datasheet资料下载
参数资料
| 型号： | ANT-125K |
| 厂商： | RF Solutions |
| 文件页数： | 2/4页 |
| 文件大小： | 0K |
| 描述： | ANTENNA RFID COIL 125KHZ |
| 标准包装： | 1 |
| 频率： | 125kHz |
| 包装： | 散装 |
ib technology
Optimum tuning and performance is achieved when these “steps” are seen exactly at
the maximum and minimum points of the sine wave, the peak voltage will also be at
its maximum value. The antenna series resistor (R) should be set to limit the peak
voltage to 100v maximum in order to give the best Q value and optimum signal-to-
noise ratio (Voltages above 200 volts peak-to-peak will give reduced range) .
100v
peak
Micro RWD driver
switching steps
Low antenna
voltage
Detuned antenna.
L too low (<750uH)
125kHz correctly tuned
antenna waveform with
Ra = 22 R to limit peak
voltage
Low antenna
voltage
Detuned antenna.
L too high (>750uH)
750uH
Antenna
22R
AN1
AN2
MicroRWD
antenna
connection pins
6) For optimum performance the antenna Q should not exceed 20 and to achieve
reliable tuning at 125kHz the antenna inductance should be around 750uH. Higher
Q and inductance values will still function but with a reduced range and
performance.
The formula for calculating Q = 2* π *fL / Rant = 549 / Rant
where f = Resonant frequency, 125 kHz, L = Antenna inductance, 750uH
Rant = Overall antenna resistance = Rdriver + Ra + (Rcu + Rrf)
π = 3.14159 etc
Rdriver = 3.5 R (from IC spec) and Ra = 22 R (series resistor in antenna loop)
Rcu = Resistance of Copper (coil and cable) and
Rrf = RF resistive component (eddy current losses etc)
By measurement at 125kHz, (Rcu + Rrf) = approx 6R
Therefore Rant = 3.5 + 22 + 6 = 31.5 Ohms, Q = 549 / 31.5 = 17
Max peak antenna current (with 22R series resistor),
Iant max = 4Vdd / π *Rant = 20 / π *31.5 = 200ma
Max peak antenna voltage, Uant max = Iant max . (2* π *fL) = 100v
7) The Micro RWD has been designed to work at optimum performance with
Rant = 31.5 (Ra = 22R), Uant max = 100v and Iant max = 200ma .
When designing and winding antenna coils, the wire gauge and it’s DC resistance
must be considered to keep close to the design optimum. Significant differences in
Ra will affect resilience to EMC and overall performance.
2
相关PDF资料 |
PDF描述 |
|---|---|
| ANT-1356M | ANTENNA RFID COIL 13.56MHZ |
| AO3460 | MOSFET N-CH 60V .65A SOT23-3 |
| AO4407A | MOSFET P-CH -30V -12A 8-SOIC |
| AO4438 | MOSFET N-CH 60V 8.2A 8-SOIC |
| AO4447A | MOSFET P-CH 30V 17A 8-SOIC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ANT13 | 制造商:CIT 制造商全称:CIT Relay & Switch 功能描述:CIT SWITCH |
| ANT-1356M | 功能描述:ANTENNA RFID COIL 13.56MHZ RoHS:是 类别:RF/IF 和 RFID >> RFID 天线 系列:- 标准包装:1 系列:- 频率:13.56MHz 技术规格:SMA 型 包装:盒 |
| ANT14 | 制造商:CIT 制造商全称:CIT Relay & Switch 功能描述:CIT SWITCH |
| ANT1400F | 制造商:RCA 功能描述:Passive Multi Directional Flat Digital Antenna - White 制造商:RCA 功能描述:INDOOR ANTENNA FLAT PANEL WHITE |
| ANT1400R | 制造商:RCA 功能描述:Passive Multi Directional Flat Digital Antenna - White 制造商:RCA 功能描述:INDOOR ANTENNA FLAT PANEL WHITE |
发布紧急采购，3分钟左右您将得到回复。