参数资料
型号: AT49SV12804-70TI
厂商: ATMEL CORP
元件分类: DRAM
英文描述: 128-megabit (8M x 16) Burst/Page Mode 1.8-volt Flash Memory
中文描述: 8M X 16 FLASH 1.8V PROM, 70 ns, PDSO56
封装: 14 X 20 MM, PLASTIC, M0-142EC, TSOP1-56
文件页数: 10/41页
文件大小: 397K
代理商: AT49SV12804-70TI
10
AT49SN/SV12804 [Preliminary]
3314A–FLASH–4/04
Note:
1. A Command Sequence Error is indicated when SR1, SR3, SR4 and SR5 are set.
Table 3.
Status Register Bit Definition
WSMS
ESS
ES
PRS
VPPS
PSS
SLS
PLS
7
6
5
4
3
2
1
0
Notes
SR7 WRITE STATE MACHINE STATUS (WSMS)
1 = Ready
0 = Busy
Check Write State Machine bit first to determine Word Program
or Sector Erase completion, before checking program or erase
status bits.
SR6 = ERASE SUSPEND STATUS (ESS)
1 = Erase Suspended
0 = Erase In Progress/Completed
When Erase Suspend is issued, WSM halts execution and sets
both WSMS and ESS bits to “1” – ESS bit remains set to “1” until
an Erase Resume command is issued.
SR5 = ERASE STATUS (ES)
1 = Error in Sector Erase
0 = Successful Sector Erase
When this bit is set to “1”, WSM has applied the max number of
erase pulses to the sector and is still unable to verify successful
sector erasure.
SR4 = PROGRAM STATUS (PRS)
1 = Error in Programming
0 = Successful Programming
When this bit is set to “1”, WSM has attempted but failed to
program a word
SR3 = VPP STATUS (VPPS)
1 = VPP Low Detect, Operation Abort
0 = VPP OK
The V
PP
status bit does not provide continuous indication of VPP
level. The WSM interrogates V
PP
level only after the Program or
Erase command sequences have been entered and informs the
system if V
PP
has not been switched on. The V
PP
is also checked
before the operation is verified by the WSM.
SR2 = PROGRAM SUSPEND STATUS (PSS)
1 = Program Suspended
0 = Program in Progress/Completed
When Program Suspend is issued, WSM halts execution and
sets both WSMS and PSS bits to “1”. PSS bit remains set to “1”
until a Program Resume command is issued.
SR1 = SECTOR LOCK STATUS
1 = Prog/Erase attempted on a locked sector; Operation aborted.
0 = No operation to locked sectors
If a Program or Erase operation is attempted to one of the locked
sectors, this bit is set by the WSM. The operation specified is
aborted and the device is returned to read status mode.
SR0 = Plane Status (PLS)
Indicates program or erase status of the addressed plane.
Table 4.
Status Register Device WSMS and Write Status Definition
WSMS
(SR7)
PLS
(SR0)
Description
0
0
The addressed plane is performing a program/erase operation.
0
1
A plane other than the one currently addressed is performing a program/erase operation.
1
x
No program/erase operation is in progress in any plane. Erase and Program suspend bits (SR6, SR2)
indicate whether other planes are suspended.
相关PDF资料
PDF描述
AT49SN6416-70CI 64-megabit (4M x 16) Burst/Page Mode 1.8-volt Flash Memory
AT49SN6416T 64-megabit (4M x 16) Burst/Page Mode 1.8-volt Flash Memory
AT49SN6416T-70CI 64-megabit (4M x 16) Burst/Page Mode 1.8-volt Flash Memory
AT49SN6416 64-megabit (4M x 16) Burst/Page Mode 1.8-volt Flash Memory
AT49SV322A 32-megabit (2M x 16/4M x 8) 1.8-volt Only Flash Memory
相关代理商/技术参数
参数描述
AT49SV163D-80CU 功能描述:闪存 Parallel 闪存 1.8V 80NS RoHS:否 制造商:ON Semiconductor 数据总线宽度:1 bit 存储类型:Flash 存储容量:2 MB 结构:256 K x 8 定时类型: 接口类型:SPI 访问时间: 电源电压-最大:3.6 V 电源电压-最小:2.3 V 最大工作电流:15 mA 工作温度:- 40 C to + 85 C 安装风格:SMD/SMT 封装 / 箱体: 封装:Reel
AT49SV163D-80TU 功能描述:闪存 Parallel 闪存 1.8V 80NS RoHS:否 制造商:ON Semiconductor 数据总线宽度:1 bit 存储类型:Flash 存储容量:2 MB 结构:256 K x 8 定时类型: 接口类型:SPI 访问时间: 电源电压-最大:3.6 V 电源电压-最小:2.3 V 最大工作电流:15 mA 工作温度:- 40 C to + 85 C 安装风格:SMD/SMT 封装 / 箱体: 封装:Reel
AT49SV163DT-80CU 功能描述:闪存 Parallel 闪存 1.8V 80NS, GR RoHS:否 制造商:ON Semiconductor 数据总线宽度:1 bit 存储类型:Flash 存储容量:2 MB 结构:256 K x 8 定时类型: 接口类型:SPI 访问时间: 电源电压-最大:3.6 V 电源电压-最小:2.3 V 最大工作电流:15 mA 工作温度:- 40 C to + 85 C 安装风格:SMD/SMT 封装 / 箱体: 封装:Reel
AT49SV163DT-80TU 功能描述:闪存 Parallel 闪存 1.8V 80NS, GR RoHS:否 制造商:ON Semiconductor 数据总线宽度:1 bit 存储类型:Flash 存储容量:2 MB 结构:256 K x 8 定时类型: 接口类型:SPI 访问时间: 电源电压-最大:3.6 V 电源电压-最小:2.3 V 最大工作电流:15 mA 工作温度:- 40 C to + 85 C 安装风格:SMD/SMT 封装 / 箱体: 封装:Reel
AT49SV322A-80CU 制造商:Atmel Corporation 功能描述:Flash Parallel 1.8V 32Mbit 4M/2M x 8bit/16bit 80ns 48-Pin CBGA