参数资料
型号: AT91SAM7S32B-MU-999
厂商: Atmel
文件页数: 44/165页
文件大小: 0K
描述: IC MCU ARM7 32KB FLASH 48-VQFN
产品培训模块: MCU Product Line Introduction
标准包装: 3,500
系列: SAM7S
核心处理器: ARM7
芯体尺寸: 16/32-位
速度: 55MHz
连通性: I²C,SPI,SSC,UART/USART
外围设备: 欠压检测/复位,DMA,POR,PWM,WDT
输入/输出数: 21
程序存储器容量: 32KB(32K x 8)
程序存储器类型: 闪存
RAM 容量: 8K x 8
电压 - 电源 (Vcc/Vdd): 1.65 V ~ 1.95 V
数据转换器: A/D 8x10b
振荡器型: 内部
工作温度: -40°C ~ 85°C
封装/外壳: 48-VFQFN 裸露焊盘
包装: 带卷 (TR)
配用: AT91SAM-ICE-ND - EMULATOR FOR AT91 ARM7/ARM9
AT91SAM7S-EK-ND - KIT EVAL FOR ARM AT91SAM7S
138
SAM7S Series [DATASHEET]
6175M–ATARM–26-Oct-12
Access to these registers is done through the TAP 38-bit DR register comprising a 32-bit data field, a 5-bit address
field and a read/write bit. The data to be written is scanned into the 32-bit data field with the address of the register
to the 5-bit address field and 1 to the read/write bit. A register is read by scanning its address into the address field
and 0 into the read/write bit, going through the UPDATE-DR TAP state, then scanning out the data.
Refer to the ARM7TDMI reference manuel for more information on Comm channel operations.
Figure 20-8. TAP 8-bit DR Register
A read or write takes place when the TAP controller enters UPDATE-DR state. Refer to the IEEE 1149.1 for more
details on JTAG operations.
The address of the Debug Comms Control Register is 0x04.
The address of the Debug Comms Data Register is 0x05.
The Debug Comms Control Register is read-only and allows synchronized handshaking between the processor
and the debugger.
– Bit 1 (W): Denotes whether the programmer can read a data through the Debug Comms Data Register.
If the device is busy W = 0, then the programmer must poll until W = 1.
– Bit 0 (R): Denotes whether the programmer can send data from the Debug Comms Data Register. If R
= 1, data previously placed there through the scan chain has not been collected by the device and so
the programmer must wait.
The write handshake is done by polling the Debug Comms Control Register until the R bit is cleared. Once cleared,
data can be written to the Debug Comms Data Register.
The read handshake is done by polling the Debug Comms Control Register until the W bit is set. Once set, data
can be read in the Debug Comms Data Register.
20.3.4
Device Operations
Several commands on the Flash memory are available. These commands are summarized in Table 20-3 on page
126. Commands are run by the programmer through the serial interface that is reading and writing the Debug
Comms Registers.
TDI
TDO
4
0
r/w
Address
31
Data
0
Address
Decoder
Debug Comms Control Register
Debug Comms Data Register
32
5
相关PDF资料
PDF描述
ATMEGA165P-16MNR IC MCU AVR 16K 16MHZ 64MLF
ATMEGA16U2-MU MCU AVR 16K FLASH USB 32VQFN
VI-B2K-IW-F3 CONVERTER MOD DC/DC 40V 100W
VI-B2J-IX-F2 CONVERTER MOD DC/DC 36V 75W
VI-B2J-IW-F4 CONVERTER MOD DC/DC 36V 100W
相关代理商/技术参数
参数描述
AT91SAM7S32-MU 功能描述:ARM微控制器 - MCU QFN IND TEMP RoHS:否 制造商:STMicroelectronics 核心:ARM Cortex M4F 处理器系列:STM32F373xx 数据总线宽度:32 bit 最大时钟频率:72 MHz 程序存储器大小:256 KB 数据 RAM 大小:32 KB 片上 ADC:Yes 工作电源电压:1.65 V to 3.6 V, 2 V to 3.6 V, 2.2 V to 3.6 V 工作温度范围:- 40 C to + 85 C 封装 / 箱体:LQFP-48 安装风格:SMD/SMT
AT91SAM7S32-MU-999 功能描述:ARM微控制器 - MCU Microcontroller RoHS:否 制造商:STMicroelectronics 核心:ARM Cortex M4F 处理器系列:STM32F373xx 数据总线宽度:32 bit 最大时钟频率:72 MHz 程序存储器大小:256 KB 数据 RAM 大小:32 KB 片上 ADC:Yes 工作电源电压:1.65 V to 3.6 V, 2 V to 3.6 V, 2.2 V to 3.6 V 工作温度范围:- 40 C to + 85 C 封装 / 箱体:LQFP-48 安装风格:SMD/SMT
AT91SAM7S512 制造商:ATMEL 制造商全称:ATMEL Corporation 功能描述:AT91 ARM Thumb-based Microcontrollers
AT91SAM7S512-AU 功能描述:ARM微控制器 - MCU LQFP IND TEMP RoHS:否 制造商:STMicroelectronics 核心:ARM Cortex M4F 处理器系列:STM32F373xx 数据总线宽度:32 bit 最大时钟频率:72 MHz 程序存储器大小:256 KB 数据 RAM 大小:32 KB 片上 ADC:Yes 工作电源电压:1.65 V to 3.6 V, 2 V to 3.6 V, 2.2 V to 3.6 V 工作温度范围:- 40 C to + 85 C 封装 / 箱体:LQFP-48 安装风格:SMD/SMT
AT91SAM7S512-AU-999 功能描述:ARM微控制器 - MCU Ind. Temp Green RoHS:否 制造商:STMicroelectronics 核心:ARM Cortex M4F 处理器系列:STM32F373xx 数据总线宽度:32 bit 最大时钟频率:72 MHz 程序存储器大小:256 KB 数据 RAM 大小:32 KB 片上 ADC:Yes 工作电源电压:1.65 V to 3.6 V, 2 V to 3.6 V, 2.2 V to 3.6 V 工作温度范围:- 40 C to + 85 C 封装 / 箱体:LQFP-48 安装风格:SMD/SMT