参数资料
型号: BD3506F-E2
厂商: Rohm Semiconductor
文件页数: 7/15页
文件大小: 0K
描述: IC REG LDO ADJ 2.5A 8SOIC
标准包装: 2,500
稳压器拓扑结构: 正,可调式
输出电压: 0.65 V ~ 2.5 V
输入电压: 1.2 V ~ 4.5 V
电压 - 压降(标准): 0.12V @ 1A
稳压器数量: 1
电流 - 输出: 2.5A(最小)
工作温度: -10°C ~ 100°C
安装类型: 表面贴装
封装/外壳: 8-SOIC(0.173",4.40mm 宽)
供应商设备封装: 8-SOP
包装: 带卷 (TR)
BD3506F,BD3506EFV
Technical Note
● Block Function
? AMP
An error amplifier that compares reference voltage (VREF) to Vo and drives Nch FET (Ron = 120/100 m ? ) of output. The
frequency characteristics are optimized so that low ESR functional polymer capacitor can be used for the output capacitor
and high-speed transient response can be achieved. The input voltage range at the AMP section is GND-2.5V and the
output voltage range of the AMP section is GND-VCC. At the time of EN OFF or UVLO, the output is brought to the LOW
level and the output NchFET is turned OFF.
? EN
By the logic input pin, regulator ON/OFF is controlled. At the time of OFF, the circuit current is controlled to be 0 μA to
reduce the standby current consumption of the apparatus. In addition, EN turns ON FET that can discharge NRCS
terminal Vo and removes excess electric charge to prevent maloperation of IC on the load side. Since there is no
electrical connection with the Vcc terminal as is the case of Di for electrostatic measures, it does not depend on the input
sequence.
? UVLO
UVLO turned OFF output to prevent output voltage from making maloperation at the time of Vcc reduced voltage. Same
as EN, UVLO discharges NRCS Vo. When voltage exceeds the threshold voltage (TYP 4.15V), UVLO starts output.
? CURRENT LIMIT
In the event the output current that exceeds the current (2.5A or more) set inside the IC flows when output is turned ON,
output voltage is attenuated to protect the IC on the load side. When current reduces, output voltage returns to the set
voltage.
? NRCS
Connecting an external capacitor to the counter-GND of NRCS pin can achieve soft start. The output voltage startup time
is determined by the time when the NRCS terminal reaches VFB (0.65V). During start-up, the NRCS terminal serves as
a constant current source of 20 μA (Typ.) output, and charges the capacitor externally connected.
? TSD (Thermal Shut down)
In order to prevent thermal breakdown and thermal runaway of the IC, the output is turned OFF when chip temperature
becomes high. In addition, when temperature returns to the specified temperature, the output is recovered. However,
since the temperature protection circuit is originally built in to protect the IC itself, thermal design within Tj(max) is
requested.
? VIN
This is a large-current supply line. The VIN terminal is connected to the rain of output NchFET. Since there is no
electrical connection with the Vcc terminal as is the case of Di for electrostatic measures, it does not depend on the input
sequence. However, because there is body Di of output NchFET between VIN and Vo, there is electrical connection
(Di-connection) between VIN and Vo. Consequently, when the output is turned ON/OFF by VIN, reverse current flows
from Vo to VIN, to which care must be taken.
www.rohm.com
? 2010 ROHM Co., Ltd. All rights reserved.
7/14
2010.05 - Rev.A
相关PDF资料
PDF描述
BD3507HFV-TR IC REG LDO ADJ .55A HVSOF6
BD3508EKN-E2 IC REG LDO ADJ 20HQFN
BD3509MUV-E2 IC REG LDO ADJ 4A 20QFN
BD3512MUV-E2 IC REG LDO ADJ 3A 20QFN
BD3522EFV-E2 IC REG LDO ADJ 4A HTSSOP-B20
相关代理商/技术参数
参数描述
BD3507HFV 制造商:ROHM 制造商全称:Rohm 功能描述:1ch Series Regulator Driver IC
BD3507HFV_08 制造商:ROHM 制造商全称:Rohm 功能描述:Ultra Low Dropout Linear Regulators for PC Chipsets
BD3507HFV_10 制造商:ROHM 制造商全称:Rohm 功能描述:Nch FET Ultra LDO for PC Chipsets
BD3507HFV-TR 功能描述:低压差控制器 - LDO DROPOUT CHIP RoHS:否 制造商:Micrel 最大输入电压:5.5 V 输出电压:Adjustable 输出电流:10 mA 负载调节: 输出类型:Adjustable, Fixed 输出端数量:1 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:SOT-23-6
BD3508EKN 制造商:ROHM 制造商全称:Rohm 功能描述:Silicon monolithic integrated circuit 1ch Series Regulator Driver IC