参数资料
| 型号： | BD9139MUV-E2 |
| 厂商： | Rohm Semiconductor |
| 文件页数： | 13/22页 |
| 文件大小： | 0K |
| 描述： | IC REG BUCK SYNC ADJ 3A 16VQFN |
| 标准包装： | 1 |
| 类型： | 降压（降压） |
| 输出类型： | 可调式 |
| 输出数： | 1 |
| 输出电压： | 0.8 V ~ 3.3 V |
| 输入电压： | 2.7 V ~ 5.5 V |
| PWM 型： | 电流模式 |
| 频率 - 开关： | 1MHz |
| 电流 - 输出： | 3A |
| 同步整流器： | 是 |
| 工作温度： | -40°C ~ 105°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 16-VFQFN 裸露焊盘 |
| 包装： | 标准包装 |
| 供应商设备封装： | 16-VQFN（3x3） |
| 其它名称： | BD9139MUV-E2DKR |
BD9139MUV
● Selection of Components Externally Connected
1. Selection of inductor (L)
I L
Δ I L
Datasheet
The inductance significantly depends on output ripple current.
As seen in the equation (1), the ripple current decreases as the
inductor and/or switching frequency increases.
V CC
Δ I L =
(V CC -V OUT ) × V OUT
L × V CC × f
[A] ??? (1)
Δ I L × V CC × f
IL
L
V OUT
Co
Appropriate ripple current at output should be 20% more or less of the
maximum output current.
Δ I L =0.2 × I OUT max. [A] ??? (2)
(V CC -V OUT ) × V OUT
L= [H] ??? (3)
Fig.28 Output ripple current
( Δ I L : Output ripple current, and f: Switching frequency)
※ Current exceeding the current rating of the inductor results in magnetic saturation of the inductor, which decreases
efficiency. The inductor must be selected allowing sufficient margin with which the peak current may not exceed its current
rating.
If V CC =5.0V, V OUT =2.5V, f=1MHz, Δ I L =0.2 × 3A=0.6A, for example,(BD9139MUV)
L=
(5-2.5) × 2.5
0.6 × 5 × 1M
=2.08μ → 2.2[μH]
※ Select the inductor of low resistance component (such as DCR and ACR) to minimize dissipation in the inductor for better
efficiency.
2. Selection of output capacitor (C O )
V CC
V OUT
Output capacitor should be selected with the consideration on the stability region and the
equivalent series resistance required to smooth ripple voltage.
Output ripple voltage is determined by the equation (4) ：
L
ESR
Δ V OUT = Δ I L × ESR [V] ??? (4)
Co
Fig.29 Output capacitor
( Δ I L : Output ripple current, ESR: Equivalent series resistance of output capacitor)
※ Rating of the capacitor should be determined allowing sufficient margin against output voltage.
A 22μF to 100μF ceramic capacitor is recommended.
Less ESR allows reduction in output ripple voltage.
www.rohm.com
?2012 ROHM Co., Ltd. All rights reserved.
TSZ22111 ? 15 ? 001
13/20
TSZ02201-0J3J0AJ00170-1-2
02.MAR.2012 Rev.001
相关PDF资料 |
PDF描述 |
|---|---|
| BD9140MUV-E2 | IC REG BUCK SYNC ADJ 2A VQFN020 |
| BD9300F-E2 | IC REG CTRLR BST INV PWM 14-SOP |
| BD9302FP-E2 | IC REG BUCK ADJ 2A DL HSOP25 |
| BD9305AFVM-TR | IC REG CTRLR BUCK PWM 8-MSOP |
| BD9328EFJ-E2 | IC REG BUCK SYNC ADJ 2A 8HTSOP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| BD9140MUV | 制造商:ROHM 制造商全称:Rohm 功能描述:1ch DC/DC Converter IC built in synchronous rectifier |
| BD9140MUV-E2 | 功能描述:IC REG BUCK SYNC ADJ 2A VQFN020 RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:- 标准包装:500 系列:- 类型:切换式电容器（充电泵），反相 输出类型:固定 输出数:1 输出电压:-3V 输入电压:2.3 V ~ 5.5 V PWM 型:Burst Mode? 频率 - 开关:900kHz 电流 - 输出:100mA 同步整流器:无 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:SOT-23-6 细型，TSOT-23-6 包装:带卷 (TR) 供应商设备封装:TSOT-23-6 其它名称:LTC1983ES6-3#TRMTR |
| BD91411GW | 制造商:ROHM 制造商全称:Rohm 功能描述:Built-in OVP Micro USB Switch with USB2.0, MHLTM and Audio |
| BD91411GW-E2 | 制造商:ROHM 制造商全称:Rohm 功能描述:Built-in OVP Micro USB Switch with USB2.0, MHLTM and Audio |
| BD9141MUV | 制造商:ROHM 制造商全称:Rohm 功能描述:4.5V to 13.2V, 2A 1ch Synchronous Buck Converter integrated FET |
发布紧急采购，3分钟左右您将得到回复。