参数资料
| 型号： | BD9328EFJ-E2 |
| 厂商： | Rohm Semiconductor |
| 文件页数： | 4/18页 |
| 文件大小： | 0K |
| 描述： | IC REG BUCK SYNC ADJ 2A 8HTSOP |
| 标准包装： | 1 |
| 类型： | 降压（降压） |
| 输出类型： | 可调式 |
| 输出数： | 1 |
| 输出电压： | 0.9 V ~ 12.6 V |
| 输入电压： | 4.2 V ~ 18 V |
| PWM 型： | 电流模式 |
| 频率 - 开关： | 380kHz |
| 电流 - 输出： | 2A |
| 同步整流器： | 是 |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 8-SOIC（0.154"，3.90mm 宽） |
| 包装： | 标准包装 |
| 供应商设备封装： | 8-HTSOP-J |
| 其它名称： | BD9328EFJ-E2DKR |
BD9328EFJ
Technical Note
● Block Operation
? VREG
A block to generate constant-voltage for DC/DC boosting.
? VREF
A block that generates internal reference voltage of 5.1 V (Typ.).
? TSD/UVLO
TSD (Thermal shutdown)/UVLO (Under Voltage Lockout) protection block.
The TSD circuit shuts down IC at high temperature.
The UVLO circuit shuts down the IC when the VCC is Low Voltage.
? Error amp block (ERR)
This is the circuit to compare the reference voltage and the feedback voltage of output voltage. The COMP pin voltage
resulting from this comparison determines the switching duty. At the time of startup, since the soft start is operated by
the SS pin voltage, the COMP pin voltage is limited to the SS pin voltage.
? Oscillator block (OSC)
This block generates the oscillating frequency.
? SLOPE block
This block generates the triangular waveform from the clock created by OSC. Generated triangular waveform is sent to
the PWM comparator.
? PWM block
The COMP pin voltage output by the error amp is compared to the SLOPE block's triangular waveform to determine the
switching duty. Since the switching duty is limited by the maximum duty ratio which is determined internally, it does not
become 100%.
? DRV block
A DC/DC driver block. A signal from the PWM is input to drive the power FETs.
? Soft start circuit
Since the output voltage rises gradually while restricting the current at the time of startup, it is possible to prevent the
output voltage overshoot or the rush current.
www.rohm.com
? 2011 ROHM Co., Ltd. All rights reserved.
4/15
2011.02 - Rev.A
相关PDF资料 |
PDF描述 |
|---|---|
| BD9329AEFJ-E2 | IC REG BUCK SYNC ADJ 3A 8HTSOP |
| BD9533EKN-E2 | IC REG SW VAR SOFT START 20-HQFN |
| BD95513MUV-E2 | IC REG BUCK ADJ 3A 32VQFN |
| BD9701T-V5 | IC REG BUCK ADJ 1.5A TO220FP |
| BD9739KN-E2 | IC REG SW BUILT IN FET 64UQFN |
相关代理商/技术参数 |
参数描述 |
|---|---|
| BD93291EFJ-E2 | 功能描述:Buck Switching Regulator IC Positive Adjustable (Fixed) 0.8V (5V) 2 Output 1.7A, 500mA 8-SOIC (0.154", 3.90mm Width) Exposed Pad 制造商:rohm semiconductor 系列:- 包装:剪切带（CT） 零件状态:有效 功能:降压 输出配置:正 拓扑:降压 输出类型:可调（固定） 输出数:2 电压 - 输入（最小值）:8V 电压 - 输入（最大值）:26V 电压 - 输出（最小值/固定）:0.8V（5V） 电压 - 输出（最大值）:4V 电流 - 输出:1.7A，500mA 频率 - 开关:300kHz ~ 600kHz，1.5MHz ~ 2.5MHz 同步整流器:是 工作温度:-40°C ~ 85°C（TA） 安装类型:表面贴装 封装/外壳:8-SOIC（0.154"，3.90mm 宽）裸焊盘 供应商器件封装:8-HTSOP-J 标准包装:1 |
| BD9329AEFJ | 制造商:ROHM 制造商全称:Rohm 功能描述:Simple Step-down Switching Regulator with Built-in Power MOSFET |
| BD9329AEFJ_EVK | 制造商:ROHM Semiconductor 功能描述:BOARD EVAL BUCK REG BD9329A |
| BD9329AEFJ-E2 | 功能描述:IC REG BUCK SYNC ADJ 3A 8HTSOP RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:50 系列:- 类型:升压（升压） 输出类型:两者兼有 输出数:1 输出电压:5V，2 V ~ 16.5 V 输入电压:2 V ~ 16.5 V PWM 型:- 频率 - 开关:45kHz 电流 - 输出:50mA 同步整流器:无 工作温度:0°C ~ 70°C 安装类型:通孔 封装/外壳:8-DIP（0.300"，7.62mm） 包装:管件 供应商设备封装:8-PDIP |
| BD9329EFJ-E2 | 制造商:ROHM Semiconductor 功能描述:CONV DC-DC SINGLE STEP DOWN 4.2V TO 18V 8-PIN HTSOP-J T/R - Tape and Reel 制造商:ROHM Semiconductor 功能描述:IC REG BUCK SYNC ADJ 3A 8-HTSOP |
发布紧急采购，3分钟左右您将得到回复。