- 您现在的位置：买卖IC网 > PDF目录256008 > BU-64703B3-190 (DATA DEVICE CORP) 2 CHANNEL(S), 1M bps, MIL-STD-1553 CONTROLLER, CBGA80 PDF资料下载
参数资料
| 型号： | BU-64703B3-190 |
| 厂商： | DATA DEVICE CORP |
| 元件分类： | 微控制器/微处理器 |
| 英文描述： | 2 CHANNEL(S), 1M bps, MIL-STD-1553 CONTROLLER, CBGA80 |
| 封装： | CERAMIC, BGA-80 |
| 文件页数： | 29/48页 |
| 文件大小： | 405K |
| 代理商： | BU-64703B3-190 |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页当前第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页
35
Data Device Corporation
www.ddc-web.com
BU-64703
D-03/06-0
SELECTED TRANSMITTER SHUTDOWN ( T/R = 0; 10100)
MESSAGE SEQUENCE = TRANSMITTER SHUTDOWN/DATA + STATUS
The Data Word received is transferred to the subsystem and Status is transmitted. No other action is taken by the SSRT Mark3. No transmitters
are shut down as a result of this mode command. This command is intended for use with RTs with more than one dual redundant channel. If the
command was a broadcast, the Broadcast Command Received bit is set and Status transmission is suppressed.
ERROR CONDITIONS
1. Invalid Command. No response, command ignored.
2. Command Not Followed by Data Word. No Status response. Set Message Error bit (Status Word), and Low Word Count Bit (BIT Word).
No status response. Bits Set: message error (SW), High Word Count, Illegal Mode Code (BIT Word)
3. Command Followed by too many Data Words. No Status response. Set Message Error bit (Status Word), and High Word Count Bit
(BIT Word).
4. Command T/R bit Set to One followed by one Data Word. No Status response. Set Message Error bit (Status Word), and High Word
Count (BIT Word).
5. Command T/R bit Set to One not followed by Data Word. The SSRT Mark3 replies with Status plus one Data Word. The Data Word is read
from the subsystem.
6. Command T/R bit Set to One and Broadcast Address. No Status response. Set Message Error and Broadcast Command Received bits
(Status Word), and Command Contents Error (BIT Word).
TRANSMIT BIT WORD ( T/R = 1; 10011)
MESSAGE SEQUENCE = TRANSMIT BIT WORD + STATUS/BIT WORD
The SSRT Mark3 responds with Status followed by the Built-in Test (BIT) word.
ERROR CONDITIONS
1. Invalid Command. No response, command ignored.
2. Command Followed by Data Word. No Status response. Set Message Error bit (Status Word), High Word Count Error (Bit Word).
3. T/R bit Set to Zero, no Data Word. No Status response. Set Message Error bit (Status Word), Low Word Count (BIT Word).
4. T/R bit Set to Zero, plus one Data Word. The SSRT Mark3 will respond with Status. The Data Word is transferred to internal registers.
5. Zero T/R bit and Broadcast Address, no Data Word. No Status response. Set Message Error and Broadcast Received bits (Status Word),
Low Word Count Error (BIT Word).
6. Zero T/R bit and Broadcast Address, one Data Word. No Status response. Set Broadcast Received Bit (status word). The Data Word is
transferred to internal registers.
7. Broadcast Address. No Status response. Set Message Error and Broadcast Command received bits (Status Word), Command Word
contents Error (BIT Word).
TRANSMIT LAST COMMAND ( T/R = 1; 10010)
MESSAGE SEQUENCE = TRANSMIT LAST COMMAND + STATUS/LAST COMMAND
The Status register is not updated before transmission. It contains the Status from the previous command. The Data Word transmitted contains
the previous valid command (providing it was not another TRANSMIT LAST COMMAND or TRANSMIT STATUS WORD mode command).
ERROR CONDITIONS
1. Invalid Command. No response, command ignored.
2. Command Followed by Data Word. No Status response. Set Message Error bit (Status Word), High Word Count Error (Bit Word).
3. T/R bit Set to Zero, no Data Word. No Status response. Set Message Error bit (Status Word), Low Word Count (BIT Word).
4. T/R bit Set to Zero, plus one Data Word. The SSRT Mark3 will respond with Status. The Data Word is transferred to the internal register.
5. Zero T/R bit and Broadcast Address, no Data Word. No Status response. Set Message Error and Broadcast Received bits (Status Word),
Low Word Count Error(BIT Word).
6. Zero T/R bit and Broadcast Address, one Data Word. No Status response. Set Broadcast Received Bit (status word). The Data Word is
transferred to the internal register.
7. Broadcast Address. No Status response. Set Message Error and Broadcast Command Received bits (Status Word), Command Word
Contents Error (BIT Word).
相关PDF资料 |
PDF描述 |
|---|---|
| BU-61580G0-150W | 2 CHANNEL(S), 1M bps, MIL-STD-1553 CONTROLLER, CDSO70 |
| BU-61580G0-180K | 2 CHANNEL(S), 1M bps, MIL-STD-1553 CONTROLLER, CDSO70 |
| BU-61580G1-150S | 2 CHANNEL(S), 1M bps, MIL-STD-1553 CONTROLLER, CDSO70 |
| BU-61580G2-110Q | 2 CHANNEL(S), 1M bps, MIL-STD-1553 CONTROLLER, CDSO70 |
| BU-61580G3-142Y | 2 CHANNEL(S), 1M bps, MIL-STD-1553 CONTROLLER, CDSO70 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| BU-65-0 | 功能描述:测试电夹 ALLIGATOR CLIP BLK RoHS:否 制造商:Pomona Electronics 类型:Minigrabber clip 颜色:Black |
| BU65-0 | 制造商:MUELLER ELECTRIC CO. 功能描述: 制造商:Mueller Electric Company 功能描述: |
| BU-651-0 | 功能描述:测试电夹 Black Shrouded Small RoHS:否 制造商:Pomona Electronics 类型:Minigrabber clip 颜色:Black |
| BU-651-2 | 功能描述:测试电夹 Red Shrouded Small A RoHS:否 制造商:Pomona Electronics 类型:Minigrabber clip 颜色:Black |
| BU65170G0-100 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Interface IC |
发布紧急采购，3分钟左右您将得到回复。