参数资料
| 型号： | CYW305OXCT |
| 厂商： | Silicon Laboratories Inc |
| 文件页数： | 16/20页 |
| 文件大小： | 0K |
| 描述： | IC CLOCK W305 SOLANO 56SSOP |
| 标准包装： | 1,000 |
| 类型： | 时钟/频率发生器 |
| PLL： | 是 |
| 主要目的： | Intel CPU 服务器 |
| 输入： | 晶体 |
| 输出： | 时钟 |
| 电路数： | 1 |
| 比率 - 输入:输出： | 1:15 |
| 差分 - 输入:输出： | 无/是 |
| 频率 - 最大： | 200MHz |
| 电源电压： | 2.375 V ~ 3.465 V |
| 工作温度： | 0°C ~ 70°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 56-BSSOP（0.295"，7.50mm 宽） |
| 供应商设备封装： | 56-SSOP |
| 包装： | 带卷 (TR) |
W305B
........................ Document #: 38-07262 Rev. *B Page 5 of 20
Serial Data Interface
The W305B features a two-pin, serial data interface that can
be used to configure internal register settings that control
particular device functions.
Data Protocol
The clock driver serial protocol supports byte/word write,
byte/word read, block write and block read operations from the
controller. For block write/read operation, the bytes must be
accessed in sequential order from lowest to highest byte with
the ability to stop after any complete byte has been trans-
ferred. For byte/word write and byte read operations, system
controller can access individual indexed byte. The offset of the
indexed byte is encoded in the command code.
The definition for the command code is given in Table 1.
CPU 133-MHz
SDRAM 133MHz
3V66 66-MHz
PCI 33-MHz
REF 14.318-MHz
USB 48-MHz
DOT 48-MHz
APIC 16.6-MHz
Cycle Repeat
0 ns
10 ns
20 ns
30 ns
40 ns
Figure 5. Group Offset Waveform (133-MHz CPU/133-MHz SDRAM)
Table 1. Command Code Definition
Bit
Descriptions
7
0 = Block read or block write operation
1 = Byte/Word read or byte/word write operation
6:0
Byte offset for byte/word read or write operation. For block read or write operations, these bits
need to be set at ‘0000000’.
Table 2. Block Read and Block Write Protocol
Block Write Protocol
Block Read Protocol
Bit
Description
Bit
Description
1
Start
1
Start
2:8
Slave address – 7 bit
2:8
Slave address – 7 bit
9Write
10
Acknowledge from slave
10
Acknowledge from slave
11:18
Command Code – 8 bit
‘00000000’ stands for block operation
11:18
Command Code – 8 bit
‘00000000’ stands for block operation
19
Acknowledge from slave
19
Acknowledge from slave
20:27
Byte Count – 8 bits
20
Repeat start
28
Acknowledge from slave
21:27
Slave address – 7 bits
29:36
Data byte 0 – 8 bits
28
Read
37
Acknowledge from slave
29
Acknowledge from slave
38:45
Data byte 1 – 8 bits
30:37
Byte count from slave – 8 bits
46
Acknowledge from slave
38
Acknowledge
...
Data Byte N/Slave Acknowledge...
39:46
Data byte from slave – 8 bits
相关PDF资料 |
PDF描述 |
|---|---|
| ICS9250BF-12 | IC FREQ TIMING GENERATOR 56-SSOP |
| PI90LV387AE | IC 16 DIFF LINE DVR HS 64-TSSOP |
| CY28323OXCT | IC CLOCK BROOKDALE GPENT4 48SSOP |
| VE-23K-MY-S | CONVERTER MOD DC/DC 40V 50W |
| ISL8563ECB | XMITTER/RCVR RS562/232 18-SOIC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| CYW311OXC | 功能描述:时钟发生器及支持产品 Sys Clk VIATM Pro266 DDR Chipset W311 DS RoHS:否 制造商:Silicon Labs 类型:Clock Generators 最大输入频率:14.318 MHz 最大输出频率:166 MHz 输出端数量:16 占空比 - 最大:55 % 工作电源电压:3.3 V 工作电源电流:1 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:QFN-56 |
| CYW311OXCT | 功能描述:时钟发生器及支持产品 Sys Clk VIATM Pro266 DDR Chipset W311 DS RoHS:否 制造商:Silicon Labs 类型:Clock Generators 最大输入频率:14.318 MHz 最大输出频率:166 MHz 输出端数量:16 占空比 - 最大:55 % 工作电源电压:3.3 V 工作电源电流:1 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:QFN-56 |
| CYW312OXC | 制造商:SPECTRALINEAR 制造商全称:SPECTRALINEAR 功能描述:FTG for VIA⑩ K7 Series Chipset with Programmable Output Frequency |
| CYW312OXCT | 制造商:CYPRESS 制造商全称:Cypress Semiconductor 功能描述:FTG for VIA⑩ K7 Series Chipset with Programmable Output Frequency |
| CYW320OXC-3 | 功能描述:时钟合成器/抖动清除器 Legacy, W320-03 datasheet RoHS:否 制造商:Skyworks Solutions, Inc. 输出端数量: 输出电平: 最大输出频率: 输入电平: 最大输入频率:6.1 GHz 电源电压-最大:3.3 V 电源电压-最小:2.7 V 封装 / 箱体:TSSOP-28 封装:Reel |
发布紧急采购，3分钟左右您将得到回复。