参数资料
| 型号： | CYW305OXCT |
| 厂商： | Silicon Laboratories Inc |
| 文件页数： | 3/20页 |
| 文件大小： | 0K |
| 描述： | IC CLOCK W305 SOLANO 56SSOP |
| 标准包装： | 1,000 |
| 类型： | 时钟/频率发生器 |
| PLL： | 是 |
| 主要目的： | Intel CPU 服务器 |
| 输入： | 晶体 |
| 输出： | 时钟 |
| 电路数： | 1 |
| 比率 - 输入:输出： | 1:15 |
| 差分 - 输入:输出： | 无/是 |
| 频率 - 最大： | 200MHz |
| 电源电压： | 2.375 V ~ 3.465 V |
| 工作温度： | 0°C ~ 70°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 56-BSSOP（0.295"，7.50mm 宽） |
| 供应商设备封装： | 56-SSOP |
| 包装： | 带卷 (TR) |
W305B
...................... Document #: 38-07262 Rev. *B Page 11 of 20
Byte 11: Recovery Frequency N-Value Register
Bit
Name
Default
Pin Description
Bit 7
ROCV_FREQ_N7
0
If ROCV_FREQ_SEL is set, W305B will use the values programmed in
ROCV_FREQ_N[7:0] and ROCV_FREQ_M[6:0] to determine the recovery
CPU output frequency.when a Watchdog timer time-out occurs
The setting of FS_Override bit determines the frequency ratio for CPU,
SDRAM, AGP and SDRAM. When it is cleared, W305b will use the same
frequency ratio stated in the Latched FS[4:0] register. When it is set, W305B
will use the frequency ratio stated in the SEL[4:0] register.
W305B supports programmable CPU frequency ranging from 50 MHz to
248 MHz.
W305Bwill change the output frequency whenever there is an update to either
ROCV_FREQ_N[7:0] and ROCV_FREQ_M[6:0]. Therefore, it is recom-
mended to use Word or Block write to update both registers within the same
SMBus bus operation.
Bit 6
ROCV_FREQ_N6
0
Bit 5
ROCV_FREQ_N5
0
Bit 4
ROCV_FREQ_N4
0
Bit 3
ROCV_FREQ_N3
0
Bit 2
ROCV_FREQ_N2
0
Bit 1
ROCV_FREQ_N1
0
Bit 0
ROCV_FREQ_N0
0
Byte 12: Recovery Frequency M-Value Register
Bit
Name
Default
Pin Description
Bit 7
ROCV_FREQ_SEL
0
ROCV_FREQ_SEL determines the source of the recover frequency when a
Watchdog timer time-out occurs. The clock generator will automatically switch
to the recovery CPU frequency based on the selection on ROCV_FREQ_SEL.
0 = From latched FS[4:0]
1 = From the settings of ROCV_FREQ_N[7:0] & ROCV_FREQ_M[6:0]
Bit 6
ROCV_FREQ_M6
0
If ROCV_FREQ_SEL is set, W305B will use the values programmed in
ROCV_FREQ_N[7:0] and ROCV_FREQ_M[6:0] to determine the recovery
CPU output frequency.when a Watchdog timer time-out occurs
The setting of FS_Override bit determines the frequency ratio for CPU,
SDRAM, AGP and SDRAM. When it is cleared, W305b will use the same
frequency ratio stated in the Latched FS[4:0] register. When it is set, W305B
will use the frequency ratio stated in the SEL[4:0] register.
W305B supports programmable CPU frequency ranging from 50 MHz to
248 MHz.
W305B will change the output frequency whenever there is an update to either
ROCV_FREQ_N[7:0] and ROCV_FREQ_M[6:0]. Therefore, it is recom-
mended to use Word or Block write to update both registers within the same
SMBus bus operation.
Bit 5
ROCV_FREQ_M5
0
Bit 4
ROCV_FREQ_M4
0
Bit 3
ROCV_FREQ_M3
0
Bit 2
ROCV_FREQ_M2
0
Bit 1
ROCV_FREQ_M1
0
Bit 0
ROCV_FREQ_M0
0
Byte 13: Programmable Frequency Select N-Value Register
Bit
Name
Default
Pin Description
Bit 7
CPU_FSEL_N7
0
If Prog_Freq_EN is set, W305B will use the values programmed in
CPU_FSEL_N[7:0] and CPU_FSEL_M[6:0] to determine the CPU output
frequency. The new frequency will start to load whenever CPU_FSELM[6:0]
is updated.
The setting of FS_Override bit determines the frequency ratio for CPU,
SDRAM, AGP and SDRAM. When it is cleared, W305B will use the same
frequency ratio stated in the Latched FS[4:0] register. When it is set, W305B
will use the frequency ratio stated in the SEL[4:0] register.
W305B supports programmable CPU frequency ranging from 50 MHz to
248 MHz.
Bit 6
CPU_FSEL_N6
0
Bit 5
CPU_FSEL_N5
0
Bit 4
CPU_FSEL_N4
0
Bit 3
CPU_FSEL_N3
0
Bit 2
CPU_FSEL_N2
0
Bit 1
CPU_FSEL_N1
0
Bit 0
CPU_FSEL_N0
0
相关PDF资料 |
PDF描述 |
|---|---|
| ICS9250BF-12 | IC FREQ TIMING GENERATOR 56-SSOP |
| PI90LV387AE | IC 16 DIFF LINE DVR HS 64-TSSOP |
| CY28323OXCT | IC CLOCK BROOKDALE GPENT4 48SSOP |
| VE-23K-MY-S | CONVERTER MOD DC/DC 40V 50W |
| ISL8563ECB | XMITTER/RCVR RS562/232 18-SOIC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| CYW311OXC | 功能描述:时钟发生器及支持产品 Sys Clk VIATM Pro266 DDR Chipset W311 DS RoHS:否 制造商:Silicon Labs 类型:Clock Generators 最大输入频率:14.318 MHz 最大输出频率:166 MHz 输出端数量:16 占空比 - 最大:55 % 工作电源电压:3.3 V 工作电源电流:1 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:QFN-56 |
| CYW311OXCT | 功能描述:时钟发生器及支持产品 Sys Clk VIATM Pro266 DDR Chipset W311 DS RoHS:否 制造商:Silicon Labs 类型:Clock Generators 最大输入频率:14.318 MHz 最大输出频率:166 MHz 输出端数量:16 占空比 - 最大:55 % 工作电源电压:3.3 V 工作电源电流:1 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:QFN-56 |
| CYW312OXC | 制造商:SPECTRALINEAR 制造商全称:SPECTRALINEAR 功能描述:FTG for VIA⑩ K7 Series Chipset with Programmable Output Frequency |
| CYW312OXCT | 制造商:CYPRESS 制造商全称:Cypress Semiconductor 功能描述:FTG for VIA⑩ K7 Series Chipset with Programmable Output Frequency |
| CYW320OXC-3 | 功能描述:时钟合成器/抖动清除器 Legacy, W320-03 datasheet RoHS:否 制造商:Skyworks Solutions, Inc. 输出端数量: 输出电平: 最大输出频率: 输入电平: 最大输入频率:6.1 GHz 电源电压-最大:3.3 V 电源电压-最小:2.7 V 封装 / 箱体:TSSOP-28 封装:Reel |
发布紧急采购，3分钟左右您将得到回复。