参数资料
型号: DG-ACC-JBST
厂商: Digi International
文件页数: 115/126页
文件大小: 0K
描述: JTAG-BOOSTER FOR NETSILICON 3.3V
标准包装: 1
系列: Digi/FS Forth
类型: 闪存
适用于相关产品: NetSilicon NS9360,NS9750,NS9775
所含物品: 编程器和关联的接口软件
其它名称: FS-9051
FS-9051-ND
JTAG-Booster for Intel XScale PXA270
Program a Flash Device
Use: JTAG270 /P filename [optionlist]
The specified file is programmed into the flash memory. The flash status is polled
after each cell is programmed (cell = 8-, 16- or 32-bit, depending on current data bus
width). In the case of a programming error, the contents of the flash memory are
written to a file with the extension DMP.
For a complete verify after programming, use an additional command line with the
verify function. In most cases, this additional verify step is not needed.
Software normally detects the type of the flash device. When auto-detection fails,
you should use the /DEVICE= option together with /8BIT or /16BIT or /32BIT to set the
right flash device and configuration.
Options
/DEVICE=devicename
The flash device is detected automatically by switching to auto-select mode. In case
of trouble, select the flash device using this parameter to avoid auto-detection.
Combine this option with one of the following options that specify the data bus width
and the option /BYTE-MODE , if applicable.
/8BIT /16BIT /32BIT
Specifies the data bus width to the target flash device. You can speed up
auto-detection if you specify the correct data bus size. You need this option together
with the /DEVICE= option to explicitly specify a particular flash configuration.
/BYTE-MODE
If there is a flash device connected to the CPU, which has a byte mode pin (8 bit and
16/32 bit bus mode), you can force it to be used as 8 bit mode with the option
/BYTE-MODE . In most cases, this option will not be needed.
/CFI
To be prepared for future flash chips, the JTAG-Booster integrates support for flashes
that contain the CFI (Common Flash Interface) information structure. CFI support is
www.digi.com
103
相关PDF资料
PDF描述
DG115-SI SURGE SUPPRSSR 6OUT 6'CORD METAL
DG115-SR SURGE SUPPR 6OUT 6'CORD W/REMOTE
DG206 SURGE SUPPRESSOR 15A 6OUT 6'CORD
DK-CYCII-2C20N CYCLONE II STARTER KIT EP2C20N
DK-DEV-2AGX260N KIT DEV FPGA 2AGX260 W/6.375G TX
相关代理商/技术参数
参数描述
DG-ACC-JLNK 功能描述:JTAG调试器 JTAG Link USB Debgr w/ 14-pin adapter RoHS:否 制造商:Olimex Ltd. 产品:JTAG In-Circuit Debuggers 工具用于评估:MSP430 Flash MCUs 用于:MSP430 Kick Start, MSPGCC 核心:MSP430 接口类型:JTAG, USB 工作电源电压:12 V
DG-ACC-JLNK-A7 制造商:Digi International 功能描述:14-PIN JTAG LINK ADAPTER - Boxed Product (Development Kits) 制造商:Digi International Inc 功能描述:ADAPTER JTAG LINK 14-PIN 制造商:Digi International Inc 功能描述:14-pin JTAG Link Adapter
DG-ACC-LX-DVD 制造商:Digi International Inc 功能描述:DIGI EMBEDDED LINUX DVD FOR DIGI JUMPSTART KITS - Boxed Product (Development Kits) 制造商:Digi International Inc 功能描述:EMBEDDED LINUX DVD JUMPSTART KIT 制造商:Digi International Inc 功能描述:Emb Linux DVD for Jumpstart Kits
DG-ACC-NET-CD 制造商:Digi International Inc 功能描述:DIGI NET+OS 7.4 CD FOR DIGI JUMPSTART KITS (INCLUDES SOFTWAR - Boxed Product (Development Kits) 制造商:Digi International Inc 功能描述:CD NET+OS 7.4 DIGI JUMPSTART KIT
DG-ACC-NET-CD-UG 制造商:Digi International Inc 功能描述:DIGI NET+OS UPGRADE CD FOR DIGI JUMPSTART KITS (NO SOFTWARE - Boxed Product (Development Kits) 制造商:Digi International Inc 功能描述:UPGRADE CD NET+OS JUMPSTART KIT