参数资料
型号: DG-ACC-JBST
厂商: Digi International
文件页数: 119/126页
文件大小: 0K
描述: JTAG-BOOSTER FOR NETSILICON 3.3V
标准包装: 1
系列: Digi/FS Forth
类型: 闪存
适用于相关产品: NetSilicon NS9360,NS9750,NS9775
所含物品: 编程器和关联的接口软件
其它名称: FS-9051
FS-9051-ND
JTAG-Booster for Intel XScale PXA270
3
4
5
6
The resulting I/O-address of the parallel port is printed here.
A JTAG-Booster is found on the parallel port
The JTAG chain is analyzed. There may be several parts in the JTAG chain. The
chain is analyzed and all parts except the Intel PXA27x are switched to bypass
mode.
The revision (1 st digit of the ID) shows the mask stepping:
Revision 3
Revision 4
PXA270 C0 BGA
PXA270 C0 MCP
7
8
9
10
11
12
The length of all instruction registers in the JTAG chain are added.
The position of the Intel XScale in the JTAG chain is assumed to be zero, if not
specified in the command line (see option /CPUPOS= ).
The position of the JTAG instruction register of the Intel XScale is assumed to be
zero, if not specified in the command line (see option /IROFFS= ).
The real length of the boundary scan register is displayed here and compared
with the boundary scan register length of an Intel PXA270.
Two Flashes Intel 28F128 selected with CS0# where found.
The resulting data bus size is printed here.
In this example one block must be erased.
Support for Windows NT, Windows 2000 and Windows XP
A configured run time version of the “Kithara DOS Enabler, Version 6.x” is used to give
support for some of the DOS based tools (such as the JTAG-Booster) for Windows NT,
Windows 2000, and Windows XP. After installation of the “DOS Enabler,” the accesses
to the LPT ports are allowed for all programs listed in file Readme_WinNT.txt
Note: Accesses to the ports are allowed only for the programs listed in file
Readme_WinNT.txt .
not work.
If you rename one of the Digi tools, the DOS Enabler does
Important:
You need administrator rights to install or uninstall this program.
www.digi.com
107
相关PDF资料
PDF描述
DG115-SI SURGE SUPPRSSR 6OUT 6'CORD METAL
DG115-SR SURGE SUPPR 6OUT 6'CORD W/REMOTE
DG206 SURGE SUPPRESSOR 15A 6OUT 6'CORD
DK-CYCII-2C20N CYCLONE II STARTER KIT EP2C20N
DK-DEV-2AGX260N KIT DEV FPGA 2AGX260 W/6.375G TX
相关代理商/技术参数
参数描述
DG-ACC-JLNK 功能描述:JTAG调试器 JTAG Link USB Debgr w/ 14-pin adapter RoHS:否 制造商:Olimex Ltd. 产品:JTAG In-Circuit Debuggers 工具用于评估:MSP430 Flash MCUs 用于:MSP430 Kick Start, MSPGCC 核心:MSP430 接口类型:JTAG, USB 工作电源电压:12 V
DG-ACC-JLNK-A7 制造商:Digi International 功能描述:14-PIN JTAG LINK ADAPTER - Boxed Product (Development Kits) 制造商:Digi International Inc 功能描述:ADAPTER JTAG LINK 14-PIN 制造商:Digi International Inc 功能描述:14-pin JTAG Link Adapter
DG-ACC-LX-DVD 制造商:Digi International Inc 功能描述:DIGI EMBEDDED LINUX DVD FOR DIGI JUMPSTART KITS - Boxed Product (Development Kits) 制造商:Digi International Inc 功能描述:EMBEDDED LINUX DVD JUMPSTART KIT 制造商:Digi International Inc 功能描述:Emb Linux DVD for Jumpstart Kits
DG-ACC-NET-CD 制造商:Digi International Inc 功能描述:DIGI NET+OS 7.4 CD FOR DIGI JUMPSTART KITS (INCLUDES SOFTWAR - Boxed Product (Development Kits) 制造商:Digi International Inc 功能描述:CD NET+OS 7.4 DIGI JUMPSTART KIT
DG-ACC-NET-CD-UG 制造商:Digi International Inc 功能描述:DIGI NET+OS UPGRADE CD FOR DIGI JUMPSTART KITS (NO SOFTWARE - Boxed Product (Development Kits) 制造商:Digi International Inc 功能描述:UPGRADE CD NET+OS JUMPSTART KIT