参数资料
型号: DG-ACC-JBST
厂商: Digi International
文件页数: 18/126页
文件大小: 0K
描述: JTAG-BOOSTER FOR NETSILICON 3.3V
标准包装: 1
系列: Digi/FS Forth
类型: 闪存
适用于相关产品: NetSilicon NS9360,NS9750,NS9775
所含物品: 编程器和关联的接口软件
其它名称: FS-9051
FS-9051-ND
ConnectCore XP 270 module
Reset Logic
The Connect Core XP 270 module has two reset signals:
RESET_IN#
RESET_OUT#
Both signals are low-active. If RESET_IN# is activated outside the module (through
reset controller or reset button), the signal is first debounced by the on-board reset
circuitry (MAXIM MAX6390XS29D4 chip) and a reset signal is transmitted to the PXA270
processor. The reset input of the PXA270 can also be activated by a power-on
sequence.
Once the processor receives the reset input signal, it resets its internal peripherals
and a processor specific output reset signal — RESET_OUT# — becomes active. This
signal is available on ConnectCore XP 270 connectors.
On-board flash memories receive the reset signal through the RESET_IN# pin and the
Ethernet controller receives the reset signal through the RESET_OUT# signal.
Intel PXA270 power-on sequence timing is fully respected on the ConnectCore XP 270
module — no special care has to be taken outside the module. For more information
about power on timing, see “Intel PXA270 Processor Electrical, Mechanical and
Thermal Specification – Order Number 280002-004 p.64.”
Watchdog
The Intel XScale PXA270 processor comes with a watchdog unit. The processor’s
OSCR0 register can be programmed to generate a watchdog-reset signal. When the
OWER[WME] field is set, the OSCR0 register is compared to the OSMR3 register every
rising edge of the internal-made 3.25MHz clock.
If a match is detected, the OS timer asserts the internal WDOG_RST pin, which
asserts the RESET_OUT# pin. A reset is applied to the PXA270 processor and most
internal states are cleared.
Once enabled, the watchdog function can be disabled only by one of the reset
functions (hardware reset, watchdog reset, or GPIO reset). Writing a zero to the
Watchdog Match Enable bit after it has been set has no effect.
For more information about the watchdog unit, see the “Intel PXA27x Processor
Family Developer’s Manual – Order Number: 280000-002”.
6
ConnectCore XP 270 Hardware Reference, Rev. B
01/2006
相关PDF资料
PDF描述
DG115-SI SURGE SUPPRSSR 6OUT 6'CORD METAL
DG115-SR SURGE SUPPR 6OUT 6'CORD W/REMOTE
DG206 SURGE SUPPRESSOR 15A 6OUT 6'CORD
DK-CYCII-2C20N CYCLONE II STARTER KIT EP2C20N
DK-DEV-2AGX260N KIT DEV FPGA 2AGX260 W/6.375G TX
相关代理商/技术参数
参数描述
DG-ACC-JLNK 功能描述:JTAG调试器 JTAG Link USB Debgr w/ 14-pin adapter RoHS:否 制造商:Olimex Ltd. 产品:JTAG In-Circuit Debuggers 工具用于评估:MSP430 Flash MCUs 用于:MSP430 Kick Start, MSPGCC 核心:MSP430 接口类型:JTAG, USB 工作电源电压:12 V
DG-ACC-JLNK-A7 制造商:Digi International 功能描述:14-PIN JTAG LINK ADAPTER - Boxed Product (Development Kits) 制造商:Digi International Inc 功能描述:ADAPTER JTAG LINK 14-PIN 制造商:Digi International Inc 功能描述:14-pin JTAG Link Adapter
DG-ACC-LX-DVD 制造商:Digi International Inc 功能描述:DIGI EMBEDDED LINUX DVD FOR DIGI JUMPSTART KITS - Boxed Product (Development Kits) 制造商:Digi International Inc 功能描述:EMBEDDED LINUX DVD JUMPSTART KIT 制造商:Digi International Inc 功能描述:Emb Linux DVD for Jumpstart Kits
DG-ACC-NET-CD 制造商:Digi International Inc 功能描述:DIGI NET+OS 7.4 CD FOR DIGI JUMPSTART KITS (INCLUDES SOFTWAR - Boxed Product (Development Kits) 制造商:Digi International Inc 功能描述:CD NET+OS 7.4 DIGI JUMPSTART KIT
DG-ACC-NET-CD-UG 制造商:Digi International Inc 功能描述:DIGI NET+OS UPGRADE CD FOR DIGI JUMPSTART KITS (NO SOFTWARE - Boxed Product (Development Kits) 制造商:Digi International Inc 功能描述:UPGRADE CD NET+OS JUMPSTART KIT