参数资料
型号: DG-ACC-JBST
厂商: Digi International
文件页数: 116/126页
文件大小: 0K
描述: JTAG-BOOSTER FOR NETSILICON 3.3V
标准包装: 1
系列: Digi/FS Forth
类型: 闪存
适用于相关产品: NetSilicon NS9360,NS9750,NS9775
所含物品: 编程器和关联的接口软件
其它名称: FS-9051
FS-9051-ND
Program a Flash Device
activated by adding the option /CFI to the command line. The JTAG-Booster then
automatically searches in all available bus widths for all possible flash types and
configurations instead of searching for the JEDEC identification code.
In case of an error, add the command line option /CFIDEBUG and redirect the program
output into a file. Sending Digi this file helps in solving problems.
/NOMAN
If you use a flash device that is identical to one of the supported parts but is from a
different manufacturer, use this option to suppress the comparison of the
manufacturer identification code. It is recommended that you use this option with
the /DEVICE= option to avoid failures in auto-detection.
/DEVICE-BASE=hhhhhh
Use this option to specify a flash device starting address. In most cases, where the
flash device is selected with one of the CPU’s chip select pins, this parameter is not
needed. If there is any decoding logic in your hardware, however, this option is
necessary. This option is especially useful when there are several flash banks
connected to one chip select and a sub decoding logic generates chip selects for
these flash banks; this option can select a specific flash bank.
Default:
Abbreviation:
/DEVICE-BASE=0
/DB=
/OFFSET=hhhhhh
The programming starts at an offset of hhhhhh relative to the start address of the
flash device. If the offset is negative, the offset specifies an address relative to the
end of the flash device. See "/TOP" on page 104 for more information.
Default:
Abbreviation:
/OFFSET=0
/O=
/TOP
If the /TOP option is used, the /OFFSET= option specifies the address where the
programming ends (plus one) instead of the starting address. This option is very
104
ConnectCore XP 270 Hardware Reference, Rev. B
01/2006
相关PDF资料
PDF描述
DG115-SI SURGE SUPPRSSR 6OUT 6'CORD METAL
DG115-SR SURGE SUPPR 6OUT 6'CORD W/REMOTE
DG206 SURGE SUPPRESSOR 15A 6OUT 6'CORD
DK-CYCII-2C20N CYCLONE II STARTER KIT EP2C20N
DK-DEV-2AGX260N KIT DEV FPGA 2AGX260 W/6.375G TX
相关代理商/技术参数
参数描述
DG-ACC-JLNK 功能描述:JTAG调试器 JTAG Link USB Debgr w/ 14-pin adapter RoHS:否 制造商:Olimex Ltd. 产品:JTAG In-Circuit Debuggers 工具用于评估:MSP430 Flash MCUs 用于:MSP430 Kick Start, MSPGCC 核心:MSP430 接口类型:JTAG, USB 工作电源电压:12 V
DG-ACC-JLNK-A7 制造商:Digi International 功能描述:14-PIN JTAG LINK ADAPTER - Boxed Product (Development Kits) 制造商:Digi International Inc 功能描述:ADAPTER JTAG LINK 14-PIN 制造商:Digi International Inc 功能描述:14-pin JTAG Link Adapter
DG-ACC-LX-DVD 制造商:Digi International Inc 功能描述:DIGI EMBEDDED LINUX DVD FOR DIGI JUMPSTART KITS - Boxed Product (Development Kits) 制造商:Digi International Inc 功能描述:EMBEDDED LINUX DVD JUMPSTART KIT 制造商:Digi International Inc 功能描述:Emb Linux DVD for Jumpstart Kits
DG-ACC-NET-CD 制造商:Digi International Inc 功能描述:DIGI NET+OS 7.4 CD FOR DIGI JUMPSTART KITS (INCLUDES SOFTWAR - Boxed Product (Development Kits) 制造商:Digi International Inc 功能描述:CD NET+OS 7.4 DIGI JUMPSTART KIT
DG-ACC-NET-CD-UG 制造商:Digi International Inc 功能描述:DIGI NET+OS UPGRADE CD FOR DIGI JUMPSTART KITS (NO SOFTWARE - Boxed Product (Development Kits) 制造商:Digi International Inc 功能描述:UPGRADE CD NET+OS JUMPSTART KIT