- 您现在的位置：买卖IC网 > PDF目录9172 > DS1856B-M50+ (Maxim Integrated Products)IC DGTL POT 50K 256TAPS 16CSBGA PDF资料下载
参数资料
| 型号： | DS1856B-M50+ |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 18/31页 |
| 文件大小： | 0K |
| 描述： | IC DGTL POT 50K 256TAPS 16CSBGA |
| 产品培训模块： | Obsolescence Mitigation Program |
| 标准包装： | 100 |
| 接片： | 256 |
| 电阻（欧姆）： | 50k |
| 电路数： | 2 |
| 温度系数： | 标准值 50 ppm/°C |
| 存储器类型： | 非易失 |
| 接口： | 2 线串口 |
| 电源电压： | 2.85 V ~ 5.5 V |
| 工作温度： | -40°C ~ 95°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 16-LBGA，CSPBGA |
| 供应商设备封装： | 16-CSBGA（4x4） |
| 包装： | 托盘 |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页当前第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页
Dual, Temperature-Controlled Resistors with Inter-
nally Calibrated Monitors and Password Protection
Maxim Integrated
25
DS1856
Programming the Look-up Table (LUT)
The following equation can be used to determine which
resistor position setting, 00h to FFh, should be written in
the LUT to achieve a given resistance at a specific tem-
perature.
R = the resistance desired at the output terminal
C = temperature in degrees Celsius
u, v, w, x1, x0, y, z, and α are calculated values found in
the corresponding look-up tables. The variable x from the
equation above is separated into x1 (the MSB of x) and x0
(the LSB of x). Their addresses and LSB values are given
below. The variable y is assigned a value. All other vari-
ables are unsigned. Resistor 0 variables are found in
Table 04, and Resistor 1 variables are found in Table 05.
When shipped from the factory, all other memory loca-
tions in the LUTs are programmed to FFh.
Table 8. Calibration Constants
Internal Calibration
The DS1856 has two methods for scaling an analog
input to a digital result. The two methods are gain and
offset. Each of the inputs (VCC, MON1, MON2, and
MON3) has a unique register for the gain and the offset
found in Table 03h, 92h to 99h, and A2h to A9h.
To scale the gain and offset of the converter for a spe-
cific input, you must first know the relationship between
the analog input and the expected digital result. The
input that would produce a digital result of all zeros is
the null value (normally this input is GND). The input
that would produce a digital result of all ones is the full-
scale (FS) value. The FS value is also found by multiply-
ing an all-ones digital answer by the weighted LSB
(e.g., since the digital reading is a 16-bit register, let us
assume that the LSB of the lowest weighted bit is
50V, then the FS value is 65,535 x 50V = 3.27675V).
A binary search is used to scale the gain of the con-
verter. This requires forcing two known voltages to the
input pin. It is preferred that one of the forced voltages
is the null input and the other is 90% of FS. Since the
LSB of the least significant bit in the digital reading reg-
ister is known, the expected digital results are also
known for both inputs (null/LSB = CNT1 and 90%FS/
LSB = CNT2).
The user might not directly force a voltage on the input.
Instead they have a circuit that transforms light, fre-
quency, power, or current to a voltage that is the input
to the DS1856. In this situation, the user does not need
to know the relationship of voltage to expected digital
result but instead knows the relationship of light, fre-
quency, power, or current to the expected digital result.
An explanation of the binary search used to scale the
gain is best served with the following example pseudo-
code:
/* Assume that the null input is 0.5V. */
/* In addition, the requirement for LSB is 50V. */
FS = 65535 x 50E-6;
/* 3.27675 */
CNT1 = 0.5 / 50E-6;
/* 10000 */
CNT2 = 0.90 x FS / 50E-6;
/* 58981.5 */
/* Thus the null input 0.5V and the 90% of FS input is
2.949075V. */
Set the trim-offset-register to zero;
Set Right-Shift register to zero (typically zero.
See the
Right-Shifting section);
gain_result = 0h;
Clamp = FFF8h/2^(Right_Shift_Register);
For n = 15 down to 0
begin
pos
R C
Ru x
v x C
w x C
xx
y x C
z x C
α,
α
,
()=
+
()+
()
()
+
()+
()
125
25
125
25
2
ADDRESS
VARIABLE
LSB
F8h
u
20
F9h
v
20E-6
FAh
w
100E-9
FBh
x1
21
FCh
x0
2-7
2E-6 (signed)
8E-6 (signed) for -025 version
FDh
y
4E-6 (signed) for -030 version
FEh
z
10E-9
FFh
α
2-2
相关PDF资料 |
PDF描述 |
|---|---|
| V72A8H300BL | CONVERTER MOD DC/DC 8V 300W |
| DS1856E-M50+ | IC DGTL POT 50K 256TAPS 16TSSOP |
| MS27466T23B2P | CONN RCPT 85POS WALL MT W/PINS |
| MS3114P18-11S | CONN RCPT 11POS JAM NUT W/SCKT |
| VE-BWP-MY-F1 | CONVERTER MOD DC/DC 13.8V 50W |
相关代理商/技术参数 |
参数描述 |
|---|---|
| DS1856B-M50/T | 制造商:Maxim Integrated Products 功能描述:- Tape and Reel |
| DS1856B-M50/T&R | 制造商:Maxim Integrated Products 功能描述:DUALTEMP 50K,3MON BGA FULL A0/A2M T - Tape and Reel 制造商:Maxim Integrated Products 功能描述:IC DGTL POT 50K 2CH 16CSBGA 制造商:Maxim Integrated Products 功能描述:Digital Potentiometer ICs Extremely Acc SPI Bus RTC |
| DS1856B-M50+ | 功能描述:数字电位计 IC DUALTEMP 50K3MON W/FULL AO/A2 MEMORY RoHS:否 制造商:Maxim Integrated 电阻:200 Ohms 温度系数:35 PPM / C 容差:25 % POT 数量:Dual 每 POT 分接头:256 弧刷存储器:Volatile 缓冲刷: 数字接口:Serial (3-Wire, SPI) 描述/功能:Dual Volatile Low Voltage Linear Taper Digital Potentiometer 工作电源电压:1.7 V to 5.5 V 电源电流:27 uA 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:TQFN-16 封装:Reel |
| DS1856B-M50+R | 制造商:MAXIM 制造商全称:Maxim Integrated Products 功能描述:Dual, Temperature-Controlled Resistors with Calibrated Monitors and Password Protection |
| DS1856B-M50+T | 制造商:Maxim Integrated Products 功能描述:DUALTEMP 50K,3MON BGA W/FULL AO/A2 MEMORY - Tape and Reel |
发布紧急采购，3分钟左右您将得到回复。