- 您现在的位置：买卖IC网 > PDF目录20027 > DS1864T+ (Maxim Integrated)IC LASER CTRLR 1CHAN 5.5V 28TQFN PDF资料下载
参数资料
| 型号： | DS1864T+ |
| 厂商： | Maxim Integrated |
| 文件页数： | 16/72页 |
| 文件大小： | 0K |
| 描述： | IC LASER CTRLR 1CHAN 5.5V 28TQFN |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 60 |
| 类型： | 激光二极管控制器（光纤） |
| 通道数： | 1 |
| 电源电压： | 2.97 V ~ 5.5 V |
| 电流 - 电源： | 3mA |
| 工作温度： | -40°C ~ 95°C |
| 封装/外壳： | 28-WFQFN 裸露焊盘 |
| 供应商设备封装： | 28-TQFN-EP（5x5） |
| 包装： | 管件 |
| 安装类型： | 表面贴装 |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页当前第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页第53页第54页第55页第56页第57页第58页第59页第60页第61页第62页第63页第64页第65页第66页第67页第68页第69页第70页第71页第72页
SFP Laser Controller and
Diagnostic IC
DESIRED POSITION = ?
? × 255
Detailed Description
The DS1864 manages all system monitoring functions
in a fiber-optic data transceiver module in accordance
with SFF-8472 MSA. The IC communicates with a host
system through a I 2 C bus, and can be programmed
with a unique I 2 C address.
The IC offers temperature-controlled lookup tables for
its two current-sink DACs. Monitoring and calibration
functions for supply voltage, temperature and three
analog signals are available, as well as programmable
alarm and warning flags for these signals which can be
used to trigger interrupts based on user-specified limits.
The IC also possesses laser shutdown (eye safety) fea-
tures such as programmable fast-trip alarms and inter-
rupts, in addition to signals such as FETG for laser
safety disconnect.
The memory is protected by a customizable two-layer
password scheme. Furthermore, the memory layout
can be configured to be compatible with the
DS1852/DS1856 or the DS1859.
An overview of the DS1864’s functions is shown in the
block diagram in Figure 11. Additional DS1864 func-
tions are shown in Figures 12 and 13.
Control Features
The DS1864 contains two current-sink DACs, DAC0 and
DAC1. Normally, each DAC is controlled by a tempera-
ture-indexed lookup table (LUT), which can change the
DAC settings based on the temperature measured by
the internal temperature sensor. However, each DAC
can also be manually programmed by the user.
DAC0 and DAC1
The current-sink DACs are linear and have two user-
selectable ranges, 1.5mA and 0.5mA. The range is
selected by the DAC0R and DAC1R bits located in
To determine the DAC position to produce a desired
current, the following equation can be used:
? DESIRED CURRENT ?
? FULL SCALE CURRENT ?
Update bits are provided to indicate when an A/D con-
version has completed for each monitored value. These
bits are located in Lower Memory, byte 77h.
DAC Lookup Table (LUT) Operation
The current-sink DAC settings are determined by tem-
perature-controlled Lookup Tables (LUTs). The LUTs
are located in Table 02h for DAC0 and Table 03h for
DAC1. The lookup tables are 72 bytes each and allow
the biasing to be adjusted every 2°C between -40°C
and +102°C. Temperatures less than -40°C or greater
than +102°C use the -40°C or +102°C values, respec-
tively. The values programmed into the LUTs are 8-bit
unsigned values that represent the desired DAC setting
for each 2°C temperature window. The LUTs have 1°C
hysteresis (see Figure 14) to prevent the DAC’s setting
from chattering in the event the temperature remains
near a LUT switching point. Table 1 shows which regis-
ter corresponds to which temperature in the LUTs.
Figure 14 shows how the LUT chooses which memory
location to use for the DACs depending on the temper-
ature read from the internal temperature sensor.
The Temperature Index Byte (address 81h, Table 04h
(Table 01h in DS1859 configuration)) is automatically
calculated following each temperature conversion and
points to the corresponding location in the LUTs for the
9Ah
address 88h in Table 04h (Table 01h in DS1859 config-
uration). The 1.5mA range is selected when the corre-
sponding bit is set to a 1, and the 0.5mA range is
selected when the corresponding bit is set to a 0. The
temperature-indexed LUT for each DAC determines the
value to be loaded in to the DAC0 and DAC1 registers
(bytes 82h and 83h respectively in Table 04h (Table 01h
in DS1859 configuration)). The DACs can be disabled
(placed in a high-impedance mode) by pulling the TX-D
pin high. The TXDC control bit (Lower Memory Register,
byte 6Eh, bit 6) can also be used to disable the DAC
outputs by placing them in a high-impedance state.
99h
98h
97h
96h
95h
DECREASING
TEMPERATURE
INCREASING
TEMPERATURE
2
4
6 8 10
12
TEMPERATURE ( ° C)
Figure 14. LUT Hysteresis
16
____________________________________________________________________
相关PDF资料 |
PDF描述 |
|---|---|
| R2S-153.3/HP | CONV DC/DC 2W 15VIN 3.3VOUT |
| NCV8664ST33T3G | IC REG LDO 3.3V .15A SOT-223 |
| VI-B5P-CV-S | CONVERTER MOD DC/DC 13.8V 150W |
| HMC26DRXI-S734 | CONN EDGECARD 52POS DIP .100 SLD |
| VI-B52-CV-S | CONVERTER MOD DC/DC 15V 150W |
相关代理商/技术参数 |
参数描述 |
|---|---|
| DS1864T+ | 功能描述:激光驱动器 SFP Laser Controller & Diagnostic IC RoHS:否 制造商:Micrel 数据速率:4.25 Gbps 工作电源电压:3 V to 3.6 V 电源电流:80 mA 最大工作温度:+ 85 C 封装 / 箱体:QFN-16 封装:Tube |
| DS1864T+T&R | 制造商:Maxim Integrated Products 功能描述:DUAL TMP CTRL DAC+MON QFN T&R LF - Tape and Reel 制造商:Maxim Integrated Products 功能描述:IC LASER CTRLR 1CHAN 5.5V 28TQFN |
| DS1864T+T&R | 功能描述:激光驱动器 SFP Laser Controller & Diagnostic IC RoHS:否 制造商:Micrel 数据速率:4.25 Gbps 工作电源电压:3 V to 3.6 V 电源电流:80 mA 最大工作温度:+ 85 C 封装 / 箱体:QFN-16 封装:Tube |
| DS1865 | 制造商:MAXIM 制造商全称:Maxim Integrated Products 功能描述:PON Triplexer Control and Monitoring Circuit |
| DS1865_09 | 制造商:MAXIM 制造商全称:Maxim Integrated Products 功能描述:PON Triplexer Control and Monitoring Circuit |
发布紧急采购，3分钟左右您将得到回复。