参数资料
| 型号： | DS2156DK |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 4/21页 |
| 文件大小： | 0K |
| 描述： | KIT DESIGN FOR DS2156 |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 1 |
| 主要目的： | 电信，线路接口单元（LIU） |
| 已用 IC / 零件： | DS2156 |
DS2155DK/DS2156DK T1/E1/J1 Single-Chip Transceiver Design Kit Daughter Cards
BASIC OPERATION
This design kit relies upon several supporting files, which can be downloaded from our website at www.maxim-
Hardware Configuration
Using the DK101 processor board:
·
·
·
·
Connect the daughter card to the DK101 processor board.
Supply 3.3V to the banana-plug receptacles marked GND and VCC_3.3V. (The external 5V connector and the
TIM 5V supply headers are unused.)
All processor board DIP switch settings should be in the ON position with exception for the flash programming
switch, which should be OFF.
From the Programs menu launch the host application named ChipView.exe. Run the ChipView application. If
the default installation options were used, click the Start button on the Windows toolbar and select
Programs ? ChipView ? ChipView.
Using the DK2000 processor board:
·
·
·
Connect the daughter card to the DK2000 processor board.
Connect J1 to the power supply that is delivered with the kit. Alternately, a PC power supply can be connected
to connector J2.
From the Programs menu launch the host application named ChipView.exe. Run the ChipView application. If
the default installation options were used, click the Start button on the Windows toolbar and select
Programs ? ChipView ? ChipView.
General:
·
·
Upon power-up the RLOS LED is lit, as well as the MCLK-2.048MHz and TCLK-2.048MHz LEDs.
Due to the dual winding transformer, only the 120 W line build-out configuration setting is needed to cover 75 W
E1 and 120 W E1.
Quick Setup (Demo Mode)
·
·
·
The PC loads the program, offering a choice among Demo Mode, Register View, and Terminal Mode. Select
Demo Mode.
The program requests a configuration file, then select between the displayed files.
(DS2155_E1_DSNCOM_DRVR.cfg or DS2155_T1_DSNCOM_DRVR.cfg).
The Demo Mode screen appears. Upon external loopback, the LOS and OOF indicators extinguish.
Quick Setup (Register View)
·
·
·
·
The PC loads the program, offering a choice among Demo Mode, Register View, and Terminal Mode. Select
Register View.
The program requests a definition file, then select DS2155.def.
The Register View screen appears, showing the register names, acronyms, and values.
Predefined register settings for several functions are available as initialization files.
? INI files are loaded by selecting the menu File ? Reg Ini File ? Load Ini File.
? Load the INI file DS2155_T1_BERT_ESF.ini.
? After loading the INI file the following may be observed:
The RLOS LED extinguishes upon external loopback.
The DS2155/DS2156 begins transmitting a Daly pattern. When external loopback is applied, the BERT
bit-count registers BBC1–3 and BEC1–3 may be updated by clearing and setting BC1.LC and
clicking the Read All button.
Miscellaneous:
·
·
·
Clock frequencies and certain pin bias levels are provided by a register-mapped CPLD, which is on the
DS2155/DS2156 daughter card.
The definition file for this CPLD is named DS215x_35x_CPLD_V2.def. See the CPLD Register Map section for
definitions.
All files referenced above are available for download at www.maxim-ic.com/DS2155DK .
4 of 21
相关PDF资料 |
PDF描述 |
|---|---|
| DS21Q348DK | KIT DESIGN FOR DS21Q348 |
| DS21Q55DK | KIT DESIGN FOR DS21Q55 |
| DS2436K | KIT DEMO BATT ID/MON CHIP DS2436 |
| DS2438K | KIT DEMO SMART BATT MON DS2438 |
| DS26303DK | KIT DESIGN FOR DS26303 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| DS2156G | 制造商:Maxim Integrated Products 功能描述:DS2156 T1/E1/J1 SCT+UTOPIA 100BGA - Trays |
| DS2156G+ | 制造商:MAXIM 制造商全称:Maxim Integrated Products 功能描述:T1/E1/J1 Single-Chip Transceiver TDM/UTOPIA II Interface |
| DS2156GN | 制造商:MAXIM 制造商全称:Maxim Integrated Products 功能描述:T1/E1/J1 Single-Chip Transceiver TDM/UTOPIA II Interface |
| DS2156GN+ | 制造商:MAXIM 制造商全称:Maxim Integrated Products 功能描述:T1/E1/J1 Single-Chip Transceiver TDM/UTOPIA II Interface |
| DS2156L | 功能描述:网络控制器与处理器 IC T1/E1/J1 Transceiver TDM/UTOPIA II Intrfc RoHS:否 制造商:Micrel 产品:Controller Area Network (CAN) 收发器数量: 数据速率: 电源电流（最大值）:595 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PBGA-400 封装:Tray |
发布紧急采购，3分钟左右您将得到回复。