- 您现在的位置：买卖IC网 > PDF目录1788 > DS2438Z+T&R (Maxim Integrated Products)IC MONITOR SMART BATTERY 8-SOIC PDF资料下载
参数资料
| 型号： | DS2438Z+T&R |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 25/29页 |
| 文件大小： | 0K |
| 描述： | IC MONITOR SMART BATTERY 8-SOIC |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 2,500 |
| 功能： | 燃料，电量检测计/监控器 |
| 电池化学： | 智能电池 |
| 电源电压： | 2.4 V ~ 10 V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 8-SOIC（0.154"，3.90mm 宽） |
| 供应商设备封装： | 8-SOIC |
| 包装： | 带卷 (TR) |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页当前第25页第26页第27页第28页第29页
DS2438
INITIALIZATION PROCEDURE “RESET AND PRESENCE PULSES” Figure 9
RESISTOR
MASTER
DS2438
480 m s ￡ t RSTL < ￥ *
480 m s ￡ t RSTH < ￥ (includes recovery time)
15 m s ￡ t PDH < 60 m s
60 m s ￡ t PDL < 240 m s
Write Time Slots
A write time slot is initiated when the host pulls the data line from a high (inactive) logic level to a low
logic level. There are two types of write time slots: Write 1 time slots and Write 0 time slots. All write
time slots must be a minimum of 60 m s in duration with a minimum of a 1 m s recovery time between
individual write cycles.
The DS2438 samples the I/O line in a window of 15 m s to 60 m s after the I/O line falls. If the line is high,
a Write 1 occurs. If the line is low, a Write 0 occurs (See Figure 10).
For the host to generate a Write 1 time slot, the data line must be pulled to a logic low level and then
released, allowing the data line to pull up to a high level within 15 microseconds after the start of the
write time slot. For the host to generate a Write 0 time slot, the data line must be pulled to a logic low
level and remain low for the duration of the write time slot.
Read Time Slots
The host generates read time slots when data is to be read from the DS2438. A read time slot is initiated
when the host pulls the data line from a logic high level to logic low level. The data line must remain at a
low logic level for a minimum of 1 m s; output data from the DS2438 is then valid within the next 14 m s
maximum.
The host therefore must stop driving the I/O pin low in order to read its state 15 m s from the start of the
read slot. (see Figure 10). By the end of the read time slot, the I/O pin will pull back high via the external
pull-up resistor. All read time slots must be a minimum of 60 m s in duration with a minimum of a 1 m s
recovery time between individual read slots.
25 of 29
相关PDF资料 |
PDF描述 |
|---|---|
| DS2703U+ | IC BATT AUTHENTICATE SHA-1 8UMAX |
| DS2705U+ | IC AUTHENTICATE SHA-1 8-UMAX |
| DS2710G+ | IC NIMH CHRGR SGL-CELL 10-TDFN |
| DS2712Z+T&R | IC NIMH CHARGER 16SOIC |
| DS2714E+ | IC NIMH CHARGER QUAD 20TSSOP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| DS244 | 制造商:ONSEMI 制造商全称:ON Semiconductor 功能描述:Octal Buffer/Line Driver with 3-State Outputs |
| DS2441 | 制造商:DALLAS 制造商全称:Dallas Semiconductor 功能描述:1-Cell Li-Ion Battery Manager |
| DS2442 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Battery Management |
| DS245 | 制造商:ONSEMI 制造商全称:ON Semiconductor 功能描述:Octal Bus Transceiver |
| DS2450 | 制造商:DALLAS 制造商全称:Dallas Semiconductor 功能描述:1-Wire Quad A/D Converter |
发布紧急采购，3分钟左右您将得到回复。