1 of 29
052699
FEATURES
§
Provides all identification, information,
instrumentation and protection functions
needed in a lithium-ion battery pack
§
Supports one-cell battery packs
§
Protects cell from:
–
overvoltage (overcharge)
–
undervoltage (overdischarge)
–
overcurrent (charging and discharging)
–
high temperatures (thermal runaway)
§
Current accumulator tracks remaining battery
capacity in 0.5% increments
§
Voltage measurement with 10 mV accuracy
§
Temperature measurement with
±
2
°
C
accuracy eliminates need for thermistor
§
32-byte user memory stores battery data
§
64-bit ROM ID uniquely identifies each
battery pack
§
1-Wire interface carries all commands and
data via a single wire
§
Programmable alarm warns when cell is
nearly discharged
§
Programmable I/O pin supports LEDs,
vibration motors and other features
§
Operating temperature range: -40
°
C to +85
°
C
§
10kV ESD rating
PIN ASSIGNMENT
PIN DESCRIPTION
GND
PIO
ISENS
VM
V
DD
CHG
DCHG
DQ
Ground
Programmable I/O pin
Current sense input
not used, connect to GND
Power supply input (2.4V to 10V)
Charge control output
Discharge control output
Data I/O (1-Wire interface)
DESCRIPTION
The DS2441 1-Cell Li-Ion Battery Manager provides all essential functions for monitoring, protecting
and managing one-cell lithium-ion battery packs. The DS2441 constantly measures cell voltage, current,
and temperature, and automatically takes action to disable charging and/or discharging of the cell to
protect it when undesirable conditions arise.
Via its 1-Wire interface, the DS2441 provides the host system access to identification information, status
data, configuration and control settings, instrumentation registers, and general purpose data storage. Each
DS2441 has a factory-programmed 64-bit ROM ID which allows the host system to verify the
authenticity of the battery pack as well as a factory-programmed 16-bit manufacturing ID which can be
used to encode assembly location, cell chemistry and other information. A full set of status information
in the DS2441 keeps the host informed about protection conditions, remaining capacity and other matters.
Configuration and control fields in the device allow the host to disable charging and/or discharging, put
the battery pack in a low-power mode, and set various timing parameters. In addition, instrumentation
DS2441
1-Cell Li-Ion Battery Manager
www.dalsemi.com
PRELIMINARY