- 您现在的位置：买卖IC网 > PDF目录1915 > DS2480B+ (Maxim Integrated Products)IC LINE DRVR W/SENSOR 1-W 8-SOIC PDF资料下载
参数资料
| 型号： | DS2480B+ |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 6/32页 |
| 文件大小： | 0K |
| 描述： | IC LINE DRVR W/SENSOR 1-W 8-SOIC |
| 产品培训模块： | 1-Wire Communications Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 100 |
| 类型： | 线路驱动器，发射器 |
| 驱动器/接收器数： | 1/0 |
| 规程： | RS232 |
| 电源电压： | 4.5 V ~ 5.5 V |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 8-SOIC（0.154"，3.90mm 宽） |
| 供应商设备封装： | 8-SOIC |
| 包装： | 管件 |
| 产品目录页面： | 1429 (CN2011-ZH PDF) |
第1页第2页第3页第4页第5页当前第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页
DS2480B
Maxim Integrated........................................................................................................................................................................................... 14
CONTROLLED EDGES
One of the tasks of the DS2480B is to actively shape the edges of the 1-Wire communication waveforms.
This speeds up the recharging of the 1-Wire bus (rising edges) and reduces ringing of long lines (falling
edges). The circuitry for shaping rising edges is always on. The slew rate of falling edges is actively
controlled only at flexible speed and requires the parameter for slew rate control being different from its
power-on default value.
All Rising Edges
The active pullup of the rising edges reduces the rise time on the 1-Wire bus significantly compared to a
simple resistive pullup. Figure 4 shows how the DS2480B is involved in shaping a rising edge.
Figure 4. ACTIVE PULLUP
The circuit operates as follows: At t1 the pulldown (induced by the DS2480B or a device on the bus) ends.
From this point on the 1-Wire bus is pulled high by the weak pullup current IWEAKPU provided by the
DS2480B. The slope is determined by the load on the bus and the value of the pullup current. At t2 the
voltage crosses the threshold voltage VIAPO. Now the DS2480B switches over from the weak pullup
current IWEAKPU to the higher current IACTPU. As a consequence, the voltage on the bus now rises faster. As
the voltage on the bus crosses the threshold VIAPTO at t3, a timer is started. As long as this timer is on
(tAPUOT), the IACTPU current will continue to flow. After the timer is expired, the DS2480B will switch
back to the weak pullup current. Excessive noise on the 1-Wire line at the VIAPTO level can cause an
undesirable trip of the active pullup. External R-C filtering as discussed in the HARDWARE
APPLICATION EXAMPLES section and Application Note 148 should be used to prevent false triggering.
相关PDF资料 |
PDF描述 |
|---|---|
| DS2482X-100+T | IC MASTER I2C-1WIRE 1CH 9-WLP |
| DS2482X-101+T | IC MASTER I2C-1WIRE 1CH 9-WLP |
| DS2483Q+T | IC I2C TO 1WIRE BRIDGE 8TDFN |
| DS2490Y | IC BRIDGE CLIP USB TO 1-W 24SOIC |
| DS26303LN-75+A3 | IC LIU E1/T1/J1 3.3V 144-ELQFP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| DS2480B | 制造商:Maxim Integrated Products 功能描述:IC SERIAL LINE DRIVER 2480 SOIC8 |
| DS2480B/T&R | 功能描述:缓冲器和线路驱动器 RoHS:否 制造商:Micrel 输入线路数量:1 输出线路数量:2 极性:Non-Inverting 电源电压-最大:+/- 5.5 V 电源电压-最小:+/- 2.37 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:MSOP-8 封装:Reel |
| DS2480B+ | 功能描述:缓冲器和线路驱动器 Serial - 1-Wire Line Driver RoHS:否 制造商:Micrel 输入线路数量:1 输出线路数量:2 极性:Non-Inverting 电源电压-最大:+/- 5.5 V 电源电压-最小:+/- 2.37 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:MSOP-8 封装:Reel |
| DS2480B+R | 制造商:MAXIM 制造商全称:Maxim Integrated Products 功能描述:Serial to 1-Wire Line Driver |
| DS2480B+T | 制造商:MAXIM 制造商全称:Maxim Integrated Products 功能描述:Serial to 1-Wire Line Driver |
发布紧急采购，3分钟左右您将得到回复。