参数资料
型号: DS3112N
厂商: DALLAS SEMICONDUCTOR
元件分类: Digital Transmission Controller
英文描述: DATACOM, FRAMER, PBGA256
封装: 27 X 27 MM, PLASTIC, BGA-256
文件页数: 84/134页
文件大小: 900K
代理商: DS3112N
DS3112
53 of 134
5.3 T3 / E3 FRAMER STATUS and INTERRUPT REGISTER DESCRIPTION
Register Name:
T3E3SR
Register Description:
T3/E3 Status Register
Register Address:
12h
Bit #
765
43210
Name
n/a
RSOF
TSOF
T3IDLE
RAI
AIS
LOF
LOS
Default
---
-----
Bit #
151413
121110
9
8
Name
n/a
Default
---
-----
Note: See Figure 5.3A for details on the signal flow for the status bits in the T3E3SR register.
Note: Bits that are underlined are read only; all other bits are read-write.
Bit 0 / Loss Of Signal Occurrence (LOS). This latched read only alarm status bit will be set to a one
when the T3 or E3 framer detects a loss of signal. This bit will be cleared when read unless a LOS
condition still exists. A change in state of the LOS can cause a hardware interrupt to occur if the LOS bit
in the Interrupt Mask for T3E3SR (IT3E3SR) register is set to a one and the T3E3SR bit in the Interrupt
Mask for MSR (IMSR) register is set to a one. The interrupt will be allowed to clear when this bit is
read. The LOS alarm criteria is described in Tables 5.3A and 5.3B
Bit 1 / Loss Of Frame Occurrence (LOF). This latched read only alarm status bit will be set to a one
when the T3 or E3 framer detects a loss of frame. This bit will be cleared when read unless a LOF
condition still exists. A change in state of the LOF can cause a hardware interrupt to occur if the LOF bit
in the Interrupt Mask for T3E3SR (IT3E3SR) register is set to a one and the T3E3SR bit in the Interrupt
Mask for MSR (IMSR) register is set to a one. The interrupt will be allowed to clear when this bit is read.
The LOF alarm criteria is described in Tables 5.3A and 5.3B
Bit 2 / Alarm Indication Signal Detected (AIS). This latched read only alarm status bit will be set to a
one when the T3 or E3 framer detects an incoming Alarm Indication Signal. This bit will be cleared
when read unless an AIS signal is still present. A change in state of the AIS detection can cause a
hardware interrupt to occur if the AIS bit in the Interrupt Mask for T3E3SR (IT3E3SR) register is set to a
one and the T3E3SR bit in the Interrupt Mask for MSR (IMSR) register is set to a one. The interrupt will
be allowed to clear when this bit is read. The AIS alarm detection criteria is described in Tables 5.3A and
5.3B
相关PDF资料
PDF描述
DS3112 DATACOM, FRAMER, PBGA256
DS3131 SPECIALTY TELECOM CIRCUIT, PBGA256
DS3134 DATACOM, FRAMER, PBGA256
DS3150QN DATACOM, PCM TRANSCEIVER, PQCC28
DS3150Q DATACOM, PCM TRANSCEIVER, PQCC28
相关代理商/技术参数
参数描述
DS3112N+ 功能描述:网络控制器与处理器 IC TEMPE T3/E3 MUX FRMR & M13/E13/G.747 MUX RoHS:否 制造商:Micrel 产品:Controller Area Network (CAN) 收发器数量: 数据速率: 电源电流(最大值):595 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PBGA-400 封装:Tray
DS3112N+W 功能描述:网络控制器与处理器 IC TEMPE T3/E3 MUX FRMR & M13/E13/G.747 MUX RoHS:否 制造商:Micrel 产品:Controller Area Network (CAN) 收发器数量: 数据速率: 电源电流(最大值):595 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PBGA-400 封装:Tray
DS3112NC1 制造商:Maxim Integrated Products 功能描述:T3 E3 MULTIPLEXER, 3.3V T3/E3 FRAMER AND M13/E13/G.747 MUX - Rail/Tube
DS3112ND1E 制造商:Rochester Electronics LLC 功能描述: 制造商:Maxim Integrated Products 功能描述:
DS3112RD 功能描述:网络控制器与处理器 IC RoHS:否 制造商:Micrel 产品:Controller Area Network (CAN) 收发器数量: 数据速率: 电源电流(最大值):595 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PBGA-400 封装:Tray