参数资料
型号: DS83C530-ENL
厂商: DALLAS SEMICONDUCTOR
元件分类: Microcontroller
英文描述: 8-BIT, OTPROM, 33 MHz, MICROCONTROLLER, PQFP52
封装: TQFP-52
文件页数: 2/44页
文件大小: 754K
代理商: DS83C530-ENL
DS87C530/DS83C530
10 of 44
unneeded. Values in the RTC Control register are maintained by the backup source through power failure.
Once enabled, the RTC maintains time for the life of the backup source even when VCC is removed.
The RTC will maintain an accuracy of
±2 minutes per month at 25°C. Under no circumstances are
negative voltages, of any amplitude, allowed on any pin while the device is in data retention mode (VCC <
VBAT). Negative voltages will shorten battery life, possibly corrupting the contents of internal SRAM and
the RTC.
REAL TIME CLOCK Figure 2
NONVOLATILE RAM
The 1k x 8 on-chip SRAM can be nonvolatile if an external backup energy source is used. This allows the
device to log data or to store configuration settings. Internal switching circuits will detect the loss of VCC
and switch SRAM power to the backup source on the VBAT pin. The 256 bytes of direct RAM are not
affected by this circuit and are volatile.
CRYSTAL AND BACKUP SOURCES
To use the unique functions of the DS87C530/DS83C530, a 32.768 kHz timekeeping crystal and a
backup energy source are needed. The following describes guidelines for choosing these devices.
Timekeeping Crystal
The DS87C530/DS83C530 can use a standard 32.768 kHz crystal as the RTC time base. There are two
versions of standard crystals available, with 6 pF and 12.5 pF load capacitance. The tradeoff is that the 6
pF uses less power, giving longer life while VCC is off, but is more sensitive to noise and board layout.
The 12.5 pF crystal uses more power, giving a shorter battery backed life, but produces a more robust
oscillator. Bit 6 in the RTC Trim register (TRIM; 96h) must be programmed to specify the crystal type
for the oscillator. When TRIM.6 = 1, the circuit expects a 12.5 pF crystal. When TRIM.6 = 0, it expects a
6 pF crystal. This bit will be nonvolatile so these choices will remain while the backup source is present.
A guard ring (connected to the Real Time Clock ground) should encircle the RTCX1 and RTCX2 pins.
Backup Energy Source
The DS87C530/DS83C530 uses an external energy source to maintain timekeeping and SRAM data
without VCC. This source can be either a battery or 0.47 F super cap and should be connected to the VBAT
相关PDF资料
PDF描述
DS87C530-ECL 8-BIT, OTPROM, 33 MHz, MICROCONTROLLER, PQFP52
DS87C520-MCL 8-BIT, OTPROM, MICROCONTROLLER, PDIP40
DS87C520-QNL 8-BIT, OTPROM, 33 MHz, MICROCONTROLLER, PQCC44
DS87C520-QCL 8-BIT, OTPROM, 33 MHz, MICROCONTROLLER, PQCC44
DS87C520-ECL 8-BIT, OTPROM, 33 MHz, MICROCONTROLLER, PQFP44
相关代理商/技术参数
参数描述
DS83C530-ENL+ 制造商:DALLAS 制造商全称:Dallas Semiconductor 功能描述:EPROM/ROM Microcontrollers with Real-Time Clock
DS83C530-QCL 制造商:DALLAS 制造商全称:Dallas Semiconductor 功能描述:EPROM/ROM Micro with Real Time Clock
DS83C530-QCL+ 制造商:DALLAS 制造商全称:Dallas Semiconductor 功能描述:EPROM/ROM Microcontrollers with Real-Time Clock
DS83C530-QNL 制造商:MAXIM 制造商全称:Maxim Integrated Products 功能描述:EPROM/ROM Microcontrollers with Real-Time Clock
DS83C530-QNL+ 制造商:DALLAS 制造商全称:Dallas Semiconductor 功能描述:EPROM/ROM Microcontrollers with Real-Time Clock