参数资料
型号: DS83C530-ENL
厂商: DALLAS SEMICONDUCTOR
元件分类: Microcontroller
英文描述: 8-BIT, OTPROM, 33 MHz, MICROCONTROLLER, PQFP52
封装: TQFP-52
文件页数: 4/44页
文件大小: 754K
代理商: DS83C530-ENL
DS87C530/DS83C530
12 of 44
PROGRAM MEMORY ACCESS
On-chip ROM begins at address 0000h and is contiguous through 3FFFh (16kB). Exceeding the
maximum address of on-chip ROM will cause the DS87C530/DS83C530 to access off-chip memory.
However, the maximum on-chip decoded address is selectable by software using the ROMSIZE feature.
Software can cause the microcontroller to behave like a device with less on-chip memory. This is
beneficial when overlapping external memory, such as Flash, is used.
The maximum memory size is dynamically variable. Thus a portion of memory can be removed from the
memory map to access off-chip memory, then restored to access on-chip memory. In fact, all of the on-
chip memory can be removed from the memory map allowing the full 64 kB memory space to be
addressed from off-chip memory. ROM addresses that are larger than the selected maximum are
automatically fetched from outside the part via Ports 0 and 2. A depiction of the ROM memory map is
shown in Figure 4.
The ROMSIZE register is used to select the maximum on-chip decoded address for ROM. Bits RMS2,
RMS1, RMS0 have the following effect:
RMS2
RMS1
RMS0
Maximum on-chip ROM Address
0
0 kB
0
1
1 kB
0
1
0
2 kB
0
1
4 kB
1
0
8 kB
1
0
1
16 kB (default)
1
0
Invalid - reserved
1
Invalid - reserved
The reset default condition is a maximum on-chip ROM address of 16 kB. Thus no action is required if
this feature is not used. When accessing external program memory, the first 16 kB would be inaccessible.
To select a smaller effective ROM size, software must alter bits RMS2-RMS0. Altering these bits
requires a Timed Access procedure as explained below.
Care should be taken so that changing the ROMSIZE register does not corrupt program execution. For
example, assume that a device is executing instructions from internal program memory near the 12 kB
boundary (~3000h) and that the ROMSIZE register is currently configured for a 16 kB internal program
space. If software reconfigures the ROMSIZE register to 4 kB (0000h-0FFFh) in the current state, the
device will immediately jump to external program execution because program code from 4kB to 16kB
(1000h-3FFFh) is no longer located on-chip. This could result in code misalignment and execution of an
invalid instruction. The recommended method is to modify the ROMSIZE register from a location in
memory that will be internal (or external) both before and after the operation. In the above example, the
instruction which modifies the ROMSIZE register should be located below the 4 kB (1000h) boundary,
so that it will be unaffected by the memory modification. The same precaution should be applied if the
internal program memory size is modified while executing from external program memory.
Off-chip memory is accessed using the multiplexed address/data bus on P0 and the MSB address on P2.
While serving as a memory bus, these pins are not I/O ports. This convention follows the standard 8051
相关PDF资料
PDF描述
DS87C530-ECL 8-BIT, OTPROM, 33 MHz, MICROCONTROLLER, PQFP52
DS87C520-MCL 8-BIT, OTPROM, MICROCONTROLLER, PDIP40
DS87C520-QNL 8-BIT, OTPROM, 33 MHz, MICROCONTROLLER, PQCC44
DS87C520-QCL 8-BIT, OTPROM, 33 MHz, MICROCONTROLLER, PQCC44
DS87C520-ECL 8-BIT, OTPROM, 33 MHz, MICROCONTROLLER, PQFP44
相关代理商/技术参数
参数描述
DS83C530-ENL+ 制造商:DALLAS 制造商全称:Dallas Semiconductor 功能描述:EPROM/ROM Microcontrollers with Real-Time Clock
DS83C530-QCL 制造商:DALLAS 制造商全称:Dallas Semiconductor 功能描述:EPROM/ROM Micro with Real Time Clock
DS83C530-QCL+ 制造商:DALLAS 制造商全称:Dallas Semiconductor 功能描述:EPROM/ROM Microcontrollers with Real-Time Clock
DS83C530-QNL 制造商:MAXIM 制造商全称:Maxim Integrated Products 功能描述:EPROM/ROM Microcontrollers with Real-Time Clock
DS83C530-QNL+ 制造商:DALLAS 制造商全称:Dallas Semiconductor 功能描述:EPROM/ROM Microcontrollers with Real-Time Clock