- 您现在的位置：买卖IC网 > Datasheet目录410 > EE-SY193 (Omron Electronics Inc-EMC Div)SENSOR OPTO TRANS 1MM SMD Datasheet资料下载
参数资料
| 型号： | EE-SY193 |
| 厂商： | Omron Electronics Inc-EMC Div |
| 文件页数： | 4/6页 |
| 文件大小： | 0K |
| 描述： | SENSOR OPTO TRANS 1MM SMD |
| 标准包装： | 1 |
| 检测距离： | 0.039"（1mm） |
| 检测方法： | 反射 |
| 电压 - 集电极发射极击穿（最大）： | 18V |
| 电流 - 集电极 (Ic)（最大）： | 20mA |
| 电流 - DC 正向(If)： | 25mA |
| 输出类型： | 光电晶体管 |
| 响应时间： | 25µs，30µs |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 4-SMD，无引线 |
| 包装： | 标准包装 |
| 工作温度： | -30°C ~ 80°C |
| 其它名称： | OR1068DKR |
Precautions
I Soldering Information
Reflow soldering
? The following soldering paste is recommended:
Melting temperature: 178 to 192 ° C
? The recommended thickness of the metal mask for screen printing
is between 0.2 and 0.25 mm.
? Set the reflow oven so that the temperature profile shown in the
following chart is obtained for the upper surface of the product
being soldered.
10 sec. max.
220 ° C max.
4 ° C/s max.
140 to 160 ° C
40 sec. max.
4 ° C/s max.
60 to 120 sec
Time
Manual soldering
? Use “ Sn 60 ” (60% tin and 40% lead) or solder with silver content.
? Use a soldering iron of less than 25 W, and keep the temperature of
the iron tip at 300 ° C or below.
? Solder each point for a maximum of three seconds.
? After soldering, allow the product to return to room temperature
before handling it.
Storage
To protect the product from the effects of humidity until the package
is opened, dry-box storage is recommended. If this is not possible,
store the product under the following conditions:
Temperature: 10 to 30 ° C
Humidity: 60% max.
The product is packed in a humidity-proof envelope. Reflow soldering
must be done within 48 hours after opening the envelope, during
which time the product must be stored under 30 ° C at 80% maximum
humidity.
If it is necessary to store the product after opening the envelope, use
dry-box storage or reseal the envelope.
Baking
If a product has remained packed in a humidity-proof envelope for six
months or more, or if more than 48 hours have lapsed since the
envelope was opened, bake the product under the following condi-
tions before use:
Reel:60 ° C for 24 hours or more
Bulk:80 ° C for 24 hours or more
Photomicrosensor (Reflective) EE-SY193
305
相关PDF资料 |
PDF描述 |
|---|---|
| EE-SY199 | SENSOR OPTO TRANS 1MM REFL SMD |
| EE-SY201 | OPTO SENSOR REFLECT TYPE 4MM |
| EE-SY313 | OPTO SENSOR REFLECT 4.4MM |
| EE-SY410 | OPTO SENSOR 5MM REFLECT LIGHT-ON |
| EF30080S2-E00U-A99 | FAN 30X8MM 5VDC 3CFM |
相关代理商/技术参数 |
参数描述 |
|---|---|
| EESY199 | 制造商:Omron Electronic Components LLC 功能描述:SENSOR;PHOTOMICROSENSORS NON-AMPLIFIED PHOTOMICROSENSOR T&R 制造商:Omron Electronic Components LLC 功能描述:PHOTO MICROSENSOR T/R - Tape and Reel 制造商:Omron Electronic Components LLC 功能描述:SENSOR OPTO TRANS 1MM REFL SMD 制造商:Omron Electronic Components LLC 功能描述:PHOTOMICROSENSOR REFLECT. |
| EE-SY199 | 功能描述:光学开关（反射型，光电晶体管输出） Non-amplified Photomicrosensor T/R RoHS:否 制造商:Fairchild Semiconductor 感应距离:1 mm 输出设备:Phototransistor 集电极—发射极最大电压 VCEO:30 V 最大集电极电流:20 mA 正向电压:1.2 V 反向电压:5 V 最大工作温度:+ 85 C 最小工作温度:- 25 C 安装风格:SMD/SMT 封装:Reel |
| EESY201 | 制造商:Omron Electronic Components LLC 功能描述:NON-AMPLIFIED SENSOR - Bulk 制造商:Omron Electronic Components LLC 功能描述:OPTO SENSOR REFLECT TYPE 4MM |
| EE-SY201 | 功能描述:光学开关（反射型，光电晶体管输出） 4MM OPTO SENSOR REFLECT TYPE RoHS:否 制造商:Fairchild Semiconductor 感应距离:1 mm 输出设备:Phototransistor 集电极—发射极最大电压 VCEO:30 V 最大集电极电流:20 mA 正向电压:1.2 V 反向电压:5 V 最大工作温度:+ 85 C 最小工作温度:- 25 C 安装风格:SMD/SMT 封装:Reel |
| EESY202 | 功能描述:光学开关（反射型，光电晶体管输出） RoHS:否 制造商:Fairchild Semiconductor 感应距离:1 mm 输出设备:Phototransistor 集电极—发射极最大电压 VCEO:30 V 最大集电极电流:20 mA 正向电压:1.2 V 反向电压:5 V 最大工作温度:+ 85 C 最小工作温度:- 25 C 安装风格:SMD/SMT 封装:Reel |
发布紧急采购，3分钟左右您将得到回复。