参数资料
型号: EE-SY199
厂商: Omron Electronics Inc-EMC Div
文件页数: 4/6页
文件大小: 0K
描述: SENSOR OPTO TRANS 1MM REFL SMD
产品目录绘图: Reflective Sensing
EE-SY199
标准包装: 1
检测距离: 0.039"(1mm)
检测方法: 反射
电压 - 集电极发射极击穿(最大): 35V
电流 - 集电极 (Ic)(最大): 20mA
电流 - DC 正向(If): 50mA
输出类型: 光电晶体管
响应时间: 20µs,20µs
安装类型: 表面贴装
封装/外壳: 1206(3216 公制)- 3.20mm L x 1.60mm W x 1.10mm H
包装: 标准包装
工作温度: -25°C ~ 85°C
产品目录页面: 2785 (CN2011-ZH PDF)
其它名称: Z3020DKR
Precautions
■ Soldering Information
Reflow soldering
?
?
?
?
Reflow no more than once.
Adjust the amount of applied solder quantity to the product sidewall of the terminal
When designing the pcb, avoid placing traces or other connections under the sensor, as shown in the ‘Recommend Solder Pattern’ diagram
Set the reflow oven so that the temperature profile shown in the following chart is obtained for the upper surface of the product being soldered.
( ° C)
250
240 ° C MAX.
200
150
100
1 to 4 ° C/sec
1 to 4 ° C/sec
10 sec MAX.
60 sec MAX.
200 ° C
1 to 4 ° C/sec
165 ° C MAX.
50
120 sec MAX.
90 sec MAX.
25
Time
? Do not immerse the resin part of the sensor into the solder.
? The use of an infrared lamp can cause the temperature of the resin to rise too high. Test the soldering method under actual conditions and make
sure that the process is acceptable, because the impact on the junction between the device and the PCB varies depending upon the soldering
and cooling conditions.
Storage
Store the product under the following conditions:
Temperature: 5 to 30 ° C
Humidity: 70 % max.
To protect the product from the effects of humidity until the package is opened, dry-box storage is recommended.
Reflow soldering must be done within 4 8 hours after opening the aluminum-laminated bag, during which time the product must be stored between
5 ° C and 25 ° C at 60 % maximum humidity.
If it is necessary to store the product for more than 4 8 hours after opening the bag, use dry-box storage or reseal the products in the aluminum-
laminated bag with a commercially available desiccant. Then, store the sensors between 5 to 30 ° C at 70 % max. humidity, mounting them within 2
weeks.
Baking
If a product has remained packed in the aluminum-laminated bag for six months or more, or if more than 4 8 hours have lapsed since the bag was
opened, then bake the product under the following conditions before use:
125 ° C for 16 to 24 hours (max.)
Note: Do not bake the sensors while they are still in their bag. Temporarily mount them to the PCB or place them in metal trays prior to baking.
Subject the sensors to the baking process no more than once.
Cleaning Conditions
Recommended Solvents Ethyl alcohol, methyl alcohol, or isopropyl alcohol
Solvent Temperature
Immersion Time
Do not use ultrasonic cleaning.
45 ° C max
3 hours max
232
Photomicrosensor (Reflective)
EE-SY199
相关PDF资料
PDF描述
EE-SY201 OPTO SENSOR REFLECT TYPE 4MM
EE-SY313 OPTO SENSOR REFLECT 4.4MM
EE-SY410 OPTO SENSOR 5MM REFLECT LIGHT-ON
EF30080S2-E00U-A99 FAN 30X8MM 5VDC 3CFM
EHF-FD1495 POWER DIVIDER 1607-1685 MHZ
相关代理商/技术参数
参数描述
EESY201 制造商:Omron Electronic Components LLC 功能描述:NON-AMPLIFIED SENSOR - Bulk 制造商:Omron Electronic Components LLC 功能描述:OPTO SENSOR REFLECT TYPE 4MM
EE-SY201 功能描述:光学开关(反射型,光电晶体管输出) 4MM OPTO SENSOR REFLECT TYPE RoHS:否 制造商:Fairchild Semiconductor 感应距离:1 mm 输出设备:Phototransistor 集电极—发射极最大电压 VCEO:30 V 最大集电极电流:20 mA 正向电压:1.2 V 反向电压:5 V 最大工作温度:+ 85 C 最小工作温度:- 25 C 安装风格:SMD/SMT 封装:Reel
EESY202 功能描述:光学开关(反射型,光电晶体管输出) RoHS:否 制造商:Fairchild Semiconductor 感应距离:1 mm 输出设备:Phototransistor 集电极—发射极最大电压 VCEO:30 V 最大集电极电流:20 mA 正向电压:1.2 V 反向电压:5 V 最大工作温度:+ 85 C 最小工作温度:- 25 C 安装风格:SMD/SMT 封装:Reel
EESY310 制造商:Omron Electronic Components LLC 功能描述:NON-AMPLIFIED SENSOR - Bulk 制造商:Omron Electronic Components LLC 功能描述:OPTO SENSOR 5MM REFLECT DARK-ON 制造商:Omron Electronic Components LLC 功能描述:PHOTOMICROSENSOR REFLECT. 制造商:Omron Electronic Components LLC 功能描述:Photointerrupter Reflective Photologic, Open Collector 5-Pin
EE-SY310 功能描述:光学开关(反射型,光电IC输出) REFL DARK-ON RoHS:否 制造商:Optek 输出设备:Open Collector, Inverter 感应距离:12.7 mm 最大工作温度:+ 85 C 最小工作温度:- 40 C 高电平输入电压:2.9 V 低电平输出电压:0.4 V 低电平输出电流:16 mA 封装: