参数资料
型号: EFM32G222F128
厂商: Energy Micro
文件页数: 105/136页
文件大小: 0K
描述: IC MCU 32BIT 128KB FLASH 48LQFP
特色产品: EFM32 Gecko
标准包装: 1
系列: Gecko
核心处理器: ARM? Cortex?-M3
芯体尺寸: 32-位
速度: 32MHz
连通性: I²C,IrDA,智能卡,SPI,UART/USART
外围设备: 欠压检测/复位,DMA,POR,PWM,WDT
输入/输出数: 37
程序存储器容量: 128KB(128K x 8)
程序存储器类型: 闪存
RAM 容量: 16K x 8
电压 - 电源 (Vcc/Vdd): 1.8 V ~ 3.8 V
数据转换器: A/D 4x12b,D/A 1x12b
振荡器型: 外部
工作温度: -40°C ~ 85°C
封装/外壳: 48-TQFP
包装: 标准包装
其它名称: 914-1027-6
...the world's most energy friendly microcontrollers
2011-02-04 - d0002_Rev1.00
70
www.energymicro.com
where:
op
is one of:
SSAT
Saturates a signed value to a signed range.
USAT
Saturates a signed value to an unsigned range.
cond
is an optional condition code, see Section 3.3.7 (p. 43) .
Rd
is the destination register.
n
specifies the bit position to saturate to:
n ranges from 1 to 32 for SSAT
n ranges from 0 to 31 for USAT.
Rm
is the register containing the value to saturate.
shift#s
is an optional shift applied to Rm before saturating. It must be one of
the following:
ASR #s
where s is in the range 1 to 31
LSL #s
where s is in the range 0 to 31.
3.7.1.2 Operation
These instructions saturate to a signed or unsigned n-bit value.
The SSAT instruction applies the specified shift, then saturates to the signed range #2
n
–1 # x # 2n–1#1.
The USAT instruction applies the specified shift, then saturates to the unsigned range 0 # x # 2
n#1.
For signed n-bit saturation using SSAT, this means that:
if the value to be saturated is less than #2
n#1, the result returned is #2n-1
if the value to be saturated is greater than 2
n#1#1, the result returned is 2n-1#1
otherwise, the result returned is the same as the value to be saturated.
For unsigned n-bit saturation using USAT, this means that:
if the value to be saturated is less than 0, the result returned is 0
if the value to be saturated is greater than 2
n#1, the result returned is 2n#1
otherwise, the result returned is the same as the value to be saturated.
If the returned result is different from the value to be saturated, it is called saturation. If saturation occurs,
the instruction sets the Q flag to 1 in the APSR. Otherwise, it leaves the Q flag unchanged. To clear the
Q flag to 0, you must use the MSR instruction, see Section 3.10.7 (p. 83) .
To read the state of the Q flag, use the MRS instruction, see Section 3.10.6 (p. 83) .
3.7.1.3 Restrictions
Do not use SP and do not use PC.
3.7.1.4 Condition flags
These instructions do not affect the condition code flags.
If saturation occurs, these instructions set the Q flag to 1.
3.7.1.5 Examples
SSAT
R7, #16, R7, LSL #4
; Logical shift left value in R7 by 4, then
相关PDF资料
PDF描述
XM4M-2932-5012 CONN DVI 29POS 1.5A DIGTL/ANALOG
C8051F230-GQ IC 8051 MCU 8K FLASH 48TQFP
C8051F544-IQ IC 8051 MCU 8K FLASH 32-QFP
C8051F317-GM IC 8051 MCU FLASH 16KB 24QFN
3-1747981-1 CONN RECPT HDMI SMT R/A W/FLNG
相关代理商/技术参数
参数描述
EFM32G222F128G-E-QFP48R 功能描述:128K FLASH, 16K RAM, AES 制造商:silicon labs 系列:Gecko 包装:剪切带(CT) 零件状态:在售 核心处理器:ARM? Cortex?-M3 核心尺寸:32-位 速度:32MHz 连接性:I2C,IrDA,智能卡,SPI,UART/USART 外设:欠压检测/复位,DMA,POR,PWM,WDT I/O 数:37 程序存储容量:128KB(128K x 8) 程序存储器类型:闪存 EEPROM 容量:- RAM 容量:16K x 8 电压 - 电源(Vcc/Vdd):1.98 V ~ 3.8 V 数据转换器:A/D 4x12b,D/A 1x12b 振荡器类型:内部 工作温度:-40°C ~ 85°C(TA) 封装/外壳:48-TQFP 供应商器件封装:48-TQFP(7x7) 标准包装:1
EFM32G222F128-QFP48 制造商:Energy Micro AS 功能描述:GECKO MCU - Tape and Reel 制造商:Energy Micro AS 功能描述:GECKO MCU - Cut TR (SOS) 制造商:Energy Micro 功能描述:Energy Micro As EFM32G222F128-QFP48 Microcontrollers (MCU) 制造商:Energy Micro AS 功能描述:IC MCU 32BIT 128KB FLASH 48TQFP
EFM32G222F128-QFP48T 制造商:Energy Micro AS 功能描述:32 BIT ARM MPU, GECKO - Trays
EFM32G222F128-QFP48-T 制造商:Energy Micro AS 功能描述:IC MCU 32BIT 128KB FLASH 48TQFP
EFM32G222F128-T 制造商:Energy Micro AS 功能描述:IC MCU 32BIT 128KB FLASH 48TQFP