参数资料
型号: ENC424J600T-I/ML
厂商: Microchip Technology
文件页数: 41/168页
文件大小: 0K
描述: IC ETHERNET CTRLR W/SPI 44-QFN
视频文件: Fast 100 Mbps Ethernet PICtail Plus Overview
标准包装: 1,600
控制器类型: 以太网控制器(IEEE 802.3)
接口: SPI
电源电压: 3 V ~ 3.6 V
电流 - 电源: 96mA
工作温度: -40°C ~ 85°C
安装类型: 表面贴装
封装/外壳: 44-VQFN 裸露焊盘
供应商设备封装: 44-QFN(8x8)
包装: 带卷 (TR)
配用: AC164132-ND - BOARD DAUGHTER PICTAIL ETHERNET
2007 Microchip Technology Inc.
DS39599G-page 133
PIC18F2220/2320/4220/4320
15.0 CAPTURE/COMPARE/PWM
(CCP) MODULES
The standard CCP (Capture/Compare/PWM) module
contains a 16-bit register that can operate as a 16-bit
Capture register, a 16-bit Compare register or a PWM
Master/Slave Duty Cycle register. Table 15-1 shows
the timer resources required for each of the CCP
module modes.
The operation of CCP1 is identical to that of CCP2, with
the exception of the Special Event Trigger. Therefore,
operation of a CCP module is described with respect to
CCP1 except where noted. Table 15-2 shows the
interaction of the CCP modules.
Note:
In 28-pin devices, both CCP1 and CCP2
function as standard CCP modules. In
40-pin devices, CCP1 is implemented as
an Enhanced CCP module, offering addi-
tional capabilities in PWM mode. Capture
and Compare modes are identical in all
modules regardless of the device.
ule” for a discussion of the enhanced
PWM capabilities of the CCP1 module.
REGISTER 15-1:
CCPxCON: CCPx CONTROL REGISTER
U-0
R/W-0
DCxB1
DCxB0
CCPxM3
CCPxM2
CCPxM1
CCPxM0
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 7-6
Unimplemented: Read as ‘0’
bit 5-4
DCxB1:DCxB0: PWM Duty Cycle Bit 1 and Bit 0 for CCPx Module
Capture mode:
Unused.
Compare mode:
Unused.
PWM mode:
These bits are the two LSbs (bit 1 and bit 0) of the 10-bit PWM duty cycle. The eight MSbs of the duty
cycle are found in CCPR1L.
bit 3-0
CCPxM3:CCPxM0: CCPx Mode Select bits
0000 = Capture/Compare/PWM disabled (resets CCPx module)
0001 = Reserved
0010 = Compare mode: toggle output on match (CCPxIF bit is set)
0011 = Reserved
0100 = Capture mode: every falling edge
0101 = Capture mode: every rising edge
0110 = Capture mode: every 4th rising edge
0111 = Capture mode: every 16th rising edge
1000 = Compare mode: initialize CCPx pin low; on compare match, force CCPx pin high (CCPxIF bit
is set)
1001 = Compare mode: initialize CCPx pin high; on compare match, force CCPx pin low (CCPxIF bit
is set)
1010 = Compare mode: generate software interrupt on compare match (CCPxIF bit is set, CCPx pin
operates as a port pin for input and output)
1011 = Compare mode: trigger special event (CCPxIF bit is set)
11xx =PWM mode
相关PDF资料
PDF描述
PIC16F677-E/P IC PIC MCU FLASH 2KX14 20DIP
MCP2155-I/P IC IRDA PROTOCOL CTRLR 18DIP
MCP2150T-I/SS IC IRDA STD CONTROLLER 20SSOP
MCP2155T-I/SO IC IRDA PROTOCOL CONTRLR 18-SOIC
PIC18F25J10T-I/SS IC PIC MCU FLASH 16KX16 28SSOP
相关代理商/技术参数
参数描述
ENC424J600T-IPT 制造商:MICROCHIP 制造商全称:Microchip Technology 功能描述:Stand-Alone 10/100 Ethernet Controller with SPI or Parallel Interface
ENC431D05A 制造商:未知厂家 制造商全称:未知厂家 功能描述:
ENC431D-05A 制造商:未知厂家 制造商全称:未知厂家 功能描述:STD MOV
ENC431D07A 制造商:未知厂家 制造商全称:未知厂家 功能描述:
ENC431D-07A 制造商:未知厂家 制造商全称:未知厂家 功能描述:STD MOV