
Single-Channel, 128-/64-/32-Position, Up/Down,
±8%
Resistor Tolerance, Nonvolatile Digital Potentiometer
Data Sheet
Rev. A
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibilityis assumedbyAnalogDevicesforitsuse,norforanyinfringementsof patentsorother
rightsofthirdpartiesthatmayresultfromitsuse.Specificationssubjecttochangewithoutnotice.No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Fax: 781.461.3113
2011–2012 Analog Devices, Inc. All rights reserved.
FEATURES
Nominal resistor tolerance error: ±8% maximum
Wiper current: ±6 mA
Rheostat mode temperature coefficient: 35 ppm/°C
Low power consumption: 2.5mA max @ 2.7 V and 125°C
Wide bandwidth: 4 MHz (5 kΩ option)
Power-on EEPROM refresh time < 50 μs
50-year typical data retention at 125°C
1 million write cycles
2.3 V to 5.5 V supply operation
Chip select enable multiple device operation
Wide operating temperature: 40°C to +125°C
Thin, 2 mm × 2 mm × 0.55 mm 8-lead LFCSP package
APPLICATIONS
Mechanical potentiometer replacement
Portable electronics level adjustment
Audio volume control
Low resolution DAC
LCD panel brightness and contrast control
Programmable voltage to current conversion
Programmable filters, delays, time constants
Feedback resistor programmable power supply
Sensor calibration
FUNCTIONAL BLOCK DIAGRAM
GND
RDAC
REGISTER
UP/DOWN
CONTROL
LOGIC
POWER-ON
RESET
VDD
U/D
CLK
CS
EEPROM
DATA
A
W
B
EN
AD5111/
AD5113/
AD5115
096
54-
001
Figure 1.
Table 1. ±8% Resistance Tolerance Family
Model
Resistance (kΩ)
Position
Interface
10, 80
128
I2C
10, 80
128
Up/down
5, 10, 80
64
I2C
5, 10, 80
64
Up/down
5, 10, 80
64
Push-button
10, 80
32
I2C
10, 80
32
Up/down
GENERAL DESCRIPTION
for 128-/64-/32-position adjustment applications, offering
guaranteed low resistor tolerance errors of ±8% and up to
±6 mA current density in the A, B, and W pins. The low resistor
tolerance, low nominal temperature coefficient, and high
bandwidth simplify open-loop applications, as well as tolerance
matching applications.
The new low wiper resistance feature minimizes the wiper
resistance in the extremes of the resistor array to only 45 Ω,
typical.
A simple 3-wire up/down interface allows manual switching
or high speed digital control with clock rates up to 50 MHz.
LFCSP package. The parts are guaranteed to operate over the
extended industrial temperature range of 40°C to +125°C.