参数资料
| 型号： | EVAL-ADE7953EBZ |
| 厂商： | Analog Devices Inc |
| 文件页数： | 24/72页 |
| 文件大小： | 0K |
| 描述： | BOARD EVAL FOR ADE7953 |
| 标准包装： | 1 |
| 主要目的： | 电源管理，电度表/功率表 |
| 已用 IC / 零件： | ADE7953 |
| 主要属性： | 3 通道 |
| 次要属性： | USB 接口 |
| 已供物品： | 2 板，CD |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页当前第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页第53页第54页第55页第56页第57页第58页第59页第60页第61页第62页第63页第64页第65页第66页第67页第68页第69页第70页第71页第72页
ADE7953
ACTIVE POWER CALCULATION
Power is defined as the rate of energy flow from the source to
the load. It is defined as the product of the voltage and current
waveforms. The resulting waveform is called the instantaneous
power signal and is equal to the rate of energy flow at every
instant of time. The unit of power is the watt or joules/sec.
Data Sheet
ripple associated with it. This ripple is sinusoidal and has a
frequency equal to twice the line frequency. Because the ripple
is sinusoidal in nature, it is removed when the active power
signal is integrated to compute the active energy (see the Active
Energy Calculation section).
V(t) ?
I(t) ?
2 ? V ? sin( ωt )
2 ? I ? sin( ωt )
(3)
(4)
INSTANTANEOUS
POWER SIGNAL
P(t) = VRMS × IRMS – VRMS × IRMS × cos(2 ω t)
INSTANTANEOUS
ACTIVE POWER SIGNAL:
VRMS × IRMS
where:
V is the rms voltage.
I is the rms current.
P(t) = V(t) × I(t)
(5)
VRMS
×
IRMS
P(t) = VI ? VI × cos(2ω t)
The average power over an integral number of line cycles (n)
(6)
0x0 0000
1
is given by the expression in Equation 7.
nT
P ? ? P ( t ) dt ? VI (7)
nT 0
where:
P is the active or real power.
T is the line cycle period.
The active power is equal to the dc component of the instan-
taneous power signal (P(t) in Equation 5). The active power is
therefore equal to VI. This relationship is used to calculate active
power in the ADE7953 . Figure 44 illustrates this concept.
The signal chain for the active power and energy calculations in
the ADE7953 is shown in Figure 45. The instantaneous power
signal P(t) is generated by multiplying the current and voltage
signals. The dc component of the instantaneous power signal
is then extracted by LPF2 (low-pass filter) to obtain the active
power information. Because LFP2 does not have an ideal “brick
wall” frequency response, the active power signal has some
DIGITAL
I(t) = √ 2 × IRMS × sin( ω t)
V(t) = √ 2 × VRMS × sin( ω t)
Figure 44. Active Power Calculation
The ADE7953 computes the active power simultaneously on
Current Channel A and Current Channel B and stores the
resulting measurements in the AWATT (Address 0x212 and
Address 0x312) and BWATT (Address 0x213 and Address 0x313)
registers, respectively. With full-scale inputs, the expected
reading in the AWATT and BWATT registers is approximately
4862401 LSBs (decimal).
The active power measurements are taken over a bandwidth of
1.23 kHz and include the effects of any harmonics within that
range. The active power registers are updated at a rate of 6.99 kHz
and can be read using the waveform sampling mode (see the
CURRENT
CHANNEL
A
AIGAIN
INTEGRATOR
HPF
AWGAIN
AWATTOS
PHCALA
AVGAIN
LPF2
+
+
48 0
INTERNAL
ACCUMULATION
23
AENERGYA
0
VOLTAGE
CHANNEL
BVGAIN
HPF
HPF
ACTIVE POWER
SIGNAL
BWGAIN
BWATTOS
FIXED INTERNAL
THRESHOLD
PHCALB
BIGAIN
DIGITAL
INTEGRATOR
LPF2
+
+
48 0
INTERNAL
ACCUMULATION
23
AENERGYB
0
CURRENT
CHANNEL
HPF
ACTIVE POWER
SIGNAL
FIXED INTERNAL
THRESHOLD
B
Figure 45. Active Energy Signal Chain
Rev. B | Page 24 of 72
相关PDF资料 |
PDF描述 |
|---|---|
| EVAL-ADF4002EBZ1 | BOARD EVAL FOR ADF4002 |
| EVAL-ADG788EBZ | BOARD EVALUATION FOR ADG788 |
| EVAL-ADM1021AEB | BOARD EVAL FOR ADM1021 |
| EVAL-ADM1023EB | BOARD EVAL FOR ADM1023 |
| EVAL-ADM1031EB | BOARD EVAL FOR ADM1031 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| EVAL-ADF4001EBZ2 | 制造商:Analog Devices 功能描述:Evaluation Board For Pll Frequency Synthesizer 制造商:Analog Devices 功能描述:ADF4001 PLL SYNTHESIZER EVAL BOARD |
| EVAL-ADF4002EB1 | 制造商:Analog Devices 功能描述:EVAL BOARD - Bulk |
| EVAL-ADF4002EBZ1 | 功能描述:BOARD EVAL FOR ADF4002 RoHS:是 类别:编程器，开发系统 >> 评估演示板和套件 系列:- 产品培训模块:Obsolescence Mitigation Program 标准包装:1 系列:- 主要目的:电源管理，电池充电器 嵌入式:否 已用 IC / 零件:MAX8903A 主要属性:1 芯锂离子电池 次要属性:状态 LED 已供物品:板 |
| EVAL-ADF4007EBZ1 | 功能描述:BOARD EVALUATION FOR ADF4007EB1 RoHS:是 类别:编程器，开发系统 >> 评估演示板和套件 系列:- 标准包装:1 系列:PSoC® 主要目的:电源管理，热管理 嵌入式:- 已用 IC / 零件:- 主要属性:- 次要属性:- 已供物品:板，CD，电源 |
| EVAL-ADF4106EB1 | 制造商:Analog Devices 功能描述:PLL, Frequency Synthesizer |
发布紧急采购，3分钟左右您将得到回复。