参数资料
型号: FT232HL-REEL
厂商: FTDI, Future Technology Devices International Ltd
文件页数: 25/65页
文件大小: 0K
描述: IC HS USB TO UART/FIFO 48LQFP
应用说明: FT1248 Application Note
标准包装: 1
通道数: 1,UART
FIFO's: 4kb
规程: RS232,RS422,RS485
电源电压: 1.62 V ~ 1.98 V,2.97 V ~ 3.63 V
带并行端口:
带故障启动位检测功能:
带调制解调器控制功能:
安装类型: 表面贴装
封装/外壳: 48-LQFP
供应商设备封装: 48-LQFP(7x7)
包装: 标准包装
其它名称: 768-1101-6
Copyright 2012 Future Technology Devices International Limited
31
Document No.: FT_000288
FT232H SINGLE CHANNEL HI-SPEED USB TO MULTIPURPOSE UART/FIFO IC
Datasheet Version 1.8
Clearance No.: FTDI #199
4.6.1 Bus Width Protocol Decode
In order for the FT1248 master to determine the bus width within the command phase the bus width is
encoded along with the actual commands on the first active clock edge when SS_n is active and has a
data width of 8-bits.
If any of the MIOSIO [7:4] signals are low then the data transfer width equals 8-bits
If any of the MIOSIO [3:2] signals are low then the data transfer width equals 4-bits
If MIOSIO [1] signal is low then the data transfer width equals 2-bits
Else the bus width is defaulted to 1-bit
Please note that if both of the MIOSIO bit signals are low then the data transfer width is equal to the
width of high priority MIOSIO bit signal. For example if both of the MIOSIO [7:3] signals are low then
the data transfer width equals 8-bits or if both of the MIOSIO [3:1] signals are low then the data transfer
width equals 4-bits
In order to successfully decode the bus width, all MIOSIO signals must have pull up resistors. By default,
all MIOSIO signals shall be seen by the FT232H in FT1248 mode as logic ‘1’. This means that when a
FT1248 master does not wish to use certain MIOSIO signals the slave (FT232H) is still capable of
determining the requested bus width since any unused MIOSIO signals shall be pull up in the slave.
The remaining bits used during the command phase are used to contain the command itself which means
that it is possible to define up to 16 unique commands.
Figure 4.9: FT1248 Command Structure
For more details about FT1248 Interface, please refer to application note AN_167_FT1248 Parallel Serial
Interface Basics available at http://www.ftdichip.com.
CMD[3]
BWID 2-bit BWID 4-bit
CMD[2]
BWID 8-bit
CMD[1]
CMD[0]
X
LSB
MSB
0
1
2
3
4
5
6
7
1-bit Bus
Width
CMD[3]
X
CMD[2]
X
CMD[1]
CMD[0]
X
0
1
2
3
4
5
6
7
2-bit Bus
Width
CMD[3]
0
X
CMD[2]
X
CMD[1]
CMD[0]
X
0
1
2
3
4
5
6
7
4-bit Bus
Width
CMD[3]
X
0
CMD[2]
X
CMD[1]
CMD[0]
X
0
1
2
3
4
5
6
7
8-bit Bus
Width
CMD[3]
X
CMD[2]
0
CMD[1]
CMD[0]
X
0
1
2
3
4
5
6
7
相关PDF资料
PDF描述
FT232RL-REEL IC USB FS SERIAL UART 28-SSOP
FT245BL-REEL IC USB FS PARALLEL FIFO 32-LQFP
FT245RL-REEL IC USB TO PARALLEL FIFO 28-SSOP
FT4232HQ-REEL IC USB HS QUAD UART/SYNC 64-QFN
FUSB1500MHX IC USB 2.0 TRANSCEIVER 16-MLP
相关代理商/技术参数
参数描述
FT232HL-TRAY 功能描述:USB 接口集成电路 USB HS to UART/FIFO SPI/JTAG/I2C LQFP-48 RoHS:否 制造商:Cypress Semiconductor 产品:USB 2.0 数据速率: 接口类型:SPI 工作电源电压:3.15 V to 3.45 V 工作电源电流: 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:WLCSP-20
FT232HQ-REEL 功能描述:USB 接口集成电路 USB HS to UART/FIFO SPI/JTAG/I2C QFN-48 RoHS:否 制造商:Cypress Semiconductor 产品:USB 2.0 数据速率: 接口类型:SPI 工作电源电压:3.15 V to 3.45 V 工作电源电流: 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:WLCSP-20
FT232HQ-TRAY 功能描述:USB 接口集成电路 USB HS to UART/FIFO SPI/JTAG/I2C QFN-48 RoHS:否 制造商:Cypress Semiconductor 产品:USB 2.0 数据速率: 接口类型:SPI 工作电源电压:3.15 V to 3.45 V 工作电源电流: 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:WLCSP-20
FT232R 制造商:FTDI 制造商全称:FTDI 功能描述:USB UART IC - Single chip USB to asynchronous serial data transfer interface
FT232R_10 制造商:FTDI 制造商全称:FTDI 功能描述:USB UART IC - Single chip USB to asynchronous serial data transfer interface