- 您现在的位置：买卖IC网 > PDF目录385377 > HGTG30N60C3D (FAIRCHILD SEMICONDUCTOR CORP) 63A, 600V, UFS Series N-Channel IGBT with Anti-Parallel Hyperfast Diodes PDF资料下载
参数资料
| 型号： | HGTG30N60C3D |
| 厂商： | FAIRCHILD SEMICONDUCTOR CORP |
| 元件分类： | 功率晶体管 |
| 英文描述： | 63A, 600V, UFS Series N-Channel IGBT with Anti-Parallel Hyperfast Diodes |
| 中文描述： | 63 A, 600 V, N-CHANNEL IGBT, TO-247 |
| 文件页数： | 7/8页 |
| 文件大小： | 144K |
| 代理商： | HGTG30N60C3D |
2001 Fairchild Semiconductor Corporation
HGTG30N60C3D Rev. B
Handling Precautions for IGBTs
Insulated Gate Bipolar Transistors are susceptible to gate-
insulation damage by the electrostatic discharge of energy
through the devices. When handling these devices, care
should be exercised to assure that the static charge built in the
handler’s body capacitance is not discharged through the
device. With proper handling and application procedures,
however, IGBTs are currently being extensively used in
production by numerous equipment manufacturers in military,
industrial and consumer applications, with virtually no damage
problems due to electrostatic discharge. IGBTs can be
handled safely if the following basic precautions are taken:
1. Prior to assembly into a circuit, all leads should be kept
shorted together either by the use of metal shorting
springs or by the insertion into conductive material such
as “ECCOSORBD
LD26” or equivalent.
2. When devices are removed by hand from their carriers,
the hand being used should be grounded by any suitable
means - for example, with a metallic wristband.
3. Tips of soldering irons should be grounded.
4. Devices should never be inserted into or removed from
circuits with power on.
5.
Gate Voltage Rating
- Never exceed the gate-voltage
rating of V
GEM
. Exceeding the rated V
GE
can result in
permanent damage to the oxide layer in the gate region.
6.
Gate Termination
- The gates of these devices are
essentially capacitors. Circuits that leave the gate
open-circuited or floating should be avoided. These
conditions can result in turn-on of the device due to voltage
buildup on the input capacitor due to leakage currents or
pickup.
7.
Gate Protection
- These devices do not have an internal
monolithic zener diode from gate to emitter. If gate
protection is required an external zener is recommended.
Operating Frequency Information
Operating frequency information for a typical device (Figure 13)
is presented as a guide for estimating device performance
for a specific application. Other typical frequency vs collector
current (I
CE
) plots are possible using the information shown
for a typical unit in Figures 4, 7, 8, 11 and 12. The operating
frequency plot (Figure 13) of a typical device shows f
MAX1
or
f
MAX2
whichever is smaller at each point. The information is
based on measurements of a typical device and is bounded
by the maximum rated junction temperature.
f
MAX1
is defined by f
MAX1
= 0.05/(t
D(OFF)I
+ t
D(ON)I
).
Deadtime (the denominator) has been arbitrarily held to 10%
of the on-state time for a 50% duty factor. Other definitions
are possible. t
D(OFF)I
and t
D(ON)I
are defined in Figure 21.
Device turn-off delay can establish an additional frequency
limiting condition for an application other than T
JM
. t
D(OFF)I
is important when controlling output ripple under a lightly
loaded condition.
f
MAX2
is defined by f
MAX2
= (P
D
- P
C
)/(E
OFF
+ E
ON
). The
allowable dissipation (P
D
) is defined by P
D
= (T
JM
- T
C
)/R
θ
JC
.
The sum of device switching and conduction losses must
not exceed P
D
. A 50% duty factor was used (Figure 13)
and the conduction losses (P
C
) are approximated by
P
C
= (V
CE
x I
CE
)/2.
E
ON
and E
OFF
are defined in the switching waveforms
shown in Figure 21. E
ON
is the integral of the instantaneous
power loss (I
CE
x V
CE
) during turn-on and E
OFF
is the
integral of the instantaneous power loss during turn-off. All
tail losses are included in the calculation for E
OFF
; i.e. the
collector current equals zero (I
CE
= 0).
HGTG30N60C3D
相关PDF资料 |
PDF描述 |
|---|---|
| HGTG32N60E2 | 72 MACROCELL 5 VOLT ISP CPLD - NOT RECOMMENDED for NEW DESIGN |
| HGTG34N100E2 | LED 5MM VERT SUP DIFF YEL PC MNT |
| HGTG40N60A4 | 600V, SMPS Series N-Channel IGBTs(600V, SMPS系列N沟道绝缘栅双极型晶体管) |
| HGTG40N60B3 | 70A, 600V, UFS Series N-Channel IGBT(70A, 600V，N沟道绝缘栅双极晶体管) |
| HI-1567CDI | 5V MONOLITHIC DUAL TRANSCEIVERS |
相关代理商/技术参数 |
参数描述 |
|---|---|
| HGTG30N60C3D | 制造商:Fairchild Semiconductor Corporation 功能描述:SINGLE IGBT 600V 63A |
| HGTG30N60C3D_NL | 制造商:Fairchild Semiconductor Corporation 功能描述: |
| HGTG32N60E2 | 制造商:Rochester Electronics LLC 功能描述:- Bulk |
| HGTG32N60E2R4511 | 制造商:Rochester Electronics LLC 功能描述:- Bulk |
| HGTG32N60ER3431 | 制造商:Harris Corporation 功能描述: |
发布紧急采购，3分钟左右您将得到回复。