参数资料
| 型号： | IP1203TR |
| 厂商： | International Rectifier |
| 文件页数： | 12/23页 |
| 文件大小： | 0K |
| 描述： | IC REG BUCK SYNC ADJ 15A 24LGA |
| 产品变化通告： | (EP) Parts Discontinuation 25/May/2012 |
| 标准包装： | 1,000 |
| 系列： | iPOWIR™ |
| 类型： | 降压（降压） |
| 输出类型： | 可调式 |
| 输出数： | 1 |
| 输出电压： | 0.8 V ~ 8 V |
| 输入电压： | 5.5 V ~ 13.2 V |
| 频率 - 开关： | 200kHz ~ 400kHz |
| 电流 - 输出： | 15A |
| 同步整流器： | 是 |
| 工作温度： | -10°C ~ 125°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 24-LGA |
| 包装： | 带卷 (TR) |
| 供应商设备封装： | LGA（9x9） |
| 配用： | IRDCIP1203-A-ND - IP1203 REFERENCE DESIGN KIT |
iP1203
iP1203 Design Procedure
Only a few external components are required to com-
plete a dual output synchronous buck power supply
using iP1203. The following procedure will guide the
designer through the design and selection process
of these external components.
A typical application for the iP1203 is:
V IN = 12V, V OUT = 1.5V, I OUT = 15A, f sw = 300kHz, V p-p =
= 50mV
Setting the Output Voltage
The output voltage of the iP1203 is set by the 0.8V
reference V REF and external voltage dividers.
V ou t
R2
Setting the Overvoltage Trip
The output of the iP1203 will shut down if it experi-
ences a voltage in the range of 115% of V OUT . The
overvoltage sense pin FB s is connected to the out-
put through voltage dividers, R26 and R27 (Fig. 14),
and the trip setpoint is programmed according to
equation (1). A separate overvoltage sense pin FB s
is provided to protect the power supply output if for
some reason the main feedback loop is lost (for in-
stance, loss of feedback resistors). An optional 100pF
capacitor (C14) is used for delay and filtering.
If this redundancy is not required and if a Type II con-
trol loop compensation scheme is utilized, FB s pin
can be connected to FB.
Selecting the Soft-Start Capacitor
The soft start capacitor C ss is selected according to
equation (2):
FB
R5
t ss = 40 x C ss
(2)
S
iP1203
FB
C14
(Optional)
R26
R27
where,
t ss is the output voltage ramp time in milliseconds,
and C ss is the soft start capacitor in μ F.
A 0.1 μ F capacitor will provide an output voltage ramp-
up time of about 4ms.
Fig. 14: Typical Scheme for Output Voltage Setting
For Type II compensation,
Input Capacitor Selection
The switching currents impose RMS current require-
ments on the input capacitors. Equation (3) allows
the selection of the input capacitors.
V OUT is set according to equation (1):
I RMS = I out D ( 1 ? D )
(3)
V OUT = V REF x (1 + R 2 /R 5 ) (see Fig. 14)
(1)
where, I out is the output current, and D is the duty
cycle and is expressed as:
Setting R 2 to 1K, V OUT to 1.5V and V REF to 0.8V, will
result in R 5 = 1.14 Kohms. Final values can be se-
lected according to the desired accuracy of the out-
put.
To set the output voltage for Type III compensation,
refer to equation (24) in Type III compensation sec-
tion.
12
D = V OUT / V IN .
For the above example D= 0.13 and, using equation
(3) the capacitor rms current yields 5.0A.
www.irf.com
相关PDF资料 |
PDF描述 |
|---|---|
| IP1206TRPBF | IC REG BUCK SYNC ADJ 30A/15A LGA |
| IP1827PBF | IC REG BUCK SYNC ADJ 25A LGA |
| IP1837PBF | IC REG BUCK SYNC ADJ 35A LGA |
| IP2001TRPBF | IC REG BUCK SYNC ADJ 20A 144BGA |
| IP2001TR | IC REG BUCK SYNC ADJ 20A 144BGA |
相关代理商/技术参数 |
参数描述 |
|---|---|
| IP1203TRPBF | 功能描述:开关变换器、稳压器与控制器 1 OUTPUT FULL FCTN SYNC BUCK PWR BLOCK RoHS:否 制造商:Texas Instruments 输出电压:1.2 V to 10 V 输出电流:300 mA 输出功率: 输入电压:3 V to 17 V 开关频率:1 MHz 工作温度范围: 安装风格:SMD/SMT 封装 / 箱体:WSON-8 封装:Reel |
| IP1205S | 制造商:XP Power 功能描述:DC/DC CONVERTER 3W 4:1 I/P5V O/P 制造商:XP Power 功能描述:DC/DC CONVERTER 5V / -5V 3W 制造商:XP Power 功能描述:DC/DC CONVERTER, 3W, 4:1 I/P5V O/P 制造商:XP Power 功能描述:DC-DC CONV, ISO POL, 2 O/P, 3W, 5V, -5V; DC / DC Converter Type:Isolated POL; DC / DC Converter Output Type:Fixed; Input Voltage DC Min:4.5V; Input Voltage DC Max:18V; No. of Outputs:2; Output Voltage Nom.:5V, -5V; Depth:21.85mm ;RoHS Compliant: Yes |
| IP1205SA | 制造商:XP Power 功能描述:DC/DC CONVERTER 3W 4:1 I/P5V O/P 制造商:XP Power 功能描述:DC/DC CONVERTER 5V 3W 制造商:XP Power 功能描述:DC/DC CONVERTER, 3W, 4:1 I/P5V O/P 制造商:XP Power 功能描述:DC-DC CONV, ISO POL, 1 O/P, 3W, 600mA, 5V; DC / DC Converter Type:Isolated POL; DC / DC Converter Output Type:Fixed; Input Voltage DC Min:4.5V; Input Voltage DC Max:18V; No. of Outputs:1; Output Voltage Nom.:5V; Output Power Max:3W ;RoHS Compliant: Yes |
| IP1206PBF | 功能描述:开关变换器、稳压器与控制器 Multiphase LGA PWR 7.5V to 14.5V 600kHz RoHS:否 制造商:Texas Instruments 输出电压:1.2 V to 10 V 输出电流:300 mA 输出功率: 输入电压:3 V to 17 V 开关频率:1 MHz 工作温度范围: 安装风格:SMD/SMT 封装 / 箱体:WSON-8 封装:Reel |
| IP1206TRPBF | 功能描述:开关变换器、稳压器与控制器 Multiphase LGA PWR 7.5V to 14.5V 600kHz RoHS:否 制造商:Texas Instruments 输出电压:1.2 V to 10 V 输出电流:300 mA 输出功率: 输入电压:3 V to 17 V 开关频率:1 MHz 工作温度范围: 安装风格:SMD/SMT 封装 / 箱体:WSON-8 封装:Reel |
发布紧急采购，3分钟左右您将得到回复。