参数资料
型号: IR3086AMPBF
厂商: International Rectifier
文件页数: 18/33页
文件大小: 0K
描述: IC PHASE CONTROLLER OVP 20MLPQ
标准包装: 100
系列: XPhase™
应用: 处理器
电流 - 电源: 10mA
电源电压: 8.4 V ~ 14 V
工作温度: 0°C ~ 125°C
安装类型: 表面贴装
封装/外壳: 20-MLPQ
供应商设备封装: 20-MLPQ(4x4)
包装: 剪切带 (CT)
其它名称: *IR3086AMPBF
IR3086APbF
VOLTAGE LOOP COMPENSATION
The adaptive voltage positioning (AVP) is usually adopted in the computer applications to improve the transient
response and reduce the power loss at heavy load. Like current mode control, the adaptive voltage positioning loop
introduces extra zero to the voltage loop and splits the double poles of the power stage, which make the voltage
loop compensation much easier.
Resistors R FB and R DRP are chosen according to Equations (13) and (14), and the selection of compensation types
depends on the output capacitors used in the converter. For the applications using Electrolytic, Polymer or AL-
Polymer capacitors and running at lower frequency, type II compensation shown in Figure 8(a) is usually enough.
While for the applications using only ceramic capacitors and running at higher frequency, type III compensation
shown in Figure 8(b) is preferred.
For applications where AVP is not required, the compensation is the same as for the regular voltage mode control.
For converter using Polymer, AL-Polymer, and ceramic capacitors, which have much higher ESR zero frequency,
type III compensation is required as shown in Figure 8(b) with R DRP and C DRP removed.
CCP1
CCP1
VO+
RFB
RCP
CCP
RCP
CCP
RFB1
CFB
FB
-
VO+
RFB
FB
-
EAOUT
EAOUT
VDRP
RDRP
VDAC
+
EAOUT
EAOUT
VDRP
RDRP
VDAC
+
CDRP
(a) Type II compensation
(b) Type III compensation
Figure 8. Voltage loop compensation network
Type II Compensation for AVP Applications
Determine the compensation at no load, the worst case condition. Choose the crossover frequency fc between 1/10
and 1/5 of the switching frequency per phase. Assume the time constant of the resistor and capacitor across the
output inductors matches that of the inductor, and determine R CP and C CP from Equations (25) and (26), where L E
and C E are the equivalent inductance of output inductors and the equivalent capacitance of output capacitors
respectively.
R CP =
C CP =
( 2 π ? f C ) 2 ? L E ? C E ? R FB ? V PWMRMP
V O * 1 + ( 2 π * f C * C * R C ) 2
10 ? L E ? C E
R CP
(25)
(26)
C CP1 is optional and may be needed in some applications to reduce the jitter caused by the high frequency noise. A
ceramic capacitor between 10pF and 220pF is usually enough.
Type III Compensation for AVP Applications
Determine the compensation at no load, the worst case condition. Assume the time constant of the resistor and
capacitor across the output inductors matches that of the inductor, the crossover frequency and phase margin of the
voltage loop can be estimated by Equations (27) and (28), where R LE is the equivalent resistance of inductor DCR.
f C 1 =
Page 18 of 33
R DRP
2 π * C E ? G CS * R FB ? R LE
(27)
May 13, 2009
相关PDF资料
PDF描述
IR3086MPBF IC CONTROLLER PHASE 20MLPQ
IR3087MPBF IC XPHASE W/OVP/TM CTRL 20MLPQ
IR3087M IC XPHASE W/OVP/TM CTRL 20-MLPQ
IR3088AMPBF IC XPHASE CONTROL 20L-MLPQ
IR3088AMTR IC XPHASE W/FAULT DET 20L-MLPQ
相关代理商/技术参数
参数描述
IR3086AMPBF 制造商:International Rectifier 功能描述:Controller IC Package/Case:20-MLPQ
IR3086AMTR 制造商:IRF 制造商全称:International Rectifier 功能描述:XPHASETM PHASE IC WITH OVP, FAULT AND OVERTEMP DETECT
IR3086AMTRPBF 功能描述:开关变换器、稳压器与控制器 XPHASE PHASE IC Overtemp 2.5A 200ns RoHS:否 制造商:Texas Instruments 输出电压:1.2 V to 10 V 输出电流:300 mA 输出功率: 输入电压:3 V to 17 V 开关频率:1 MHz 工作温度范围: 安装风格:SMD/SMT 封装 / 箱体:WSON-8 封装:Reel
IR3086AMTRPBF-CUT TAPE 制造商:IR 功能描述:IR3086APbF Series 14 V 400 KHz Phase IC Combined with an IR XPhaseTM Control IC
IR3086APBF 制造商:IRF 制造商全称:International Rectifier 功能描述:XPHASE PHASE IC WITH OVP, FAULT AND OVERTEMP DETECT