参数资料
型号: IS-C1603-CONTROLLER
厂商: NKK Switches
文件页数: 22/52页
文件大小: 0K
描述: CTLR FOR 16 STD SMART SWITCHES
标准包装: 1
附件类型: 控制器
适用于相关产品: Standard SmartSwitch?
配用: IS15ABFP4B-ND - SMARTSWITCH STD BLK W/WHITE LED
IS15ABDP4B-ND - SMARTSWITCH STD BLU W/WHITE LED
IS15ABDP4EG-ND - SMARTSWITCH STD YELLOW/BLUE LED
IS15ABDP4E-ND - SMARTSWITCH STD BLUE W/YEL LED
IS15ABCP4EF-ND - SMARTSWITCH STD YEL/GRN LED
IS15ABCP4E-ND - SMARTSWITCH STD LED YELLOW
360-2547-ND - SMARTSWITCH STD YEL RED/GRN LED
360-2332-ND - SMARTSWITCH STANDARD RED/GRN/BLU
360-2330-ND - SMARTSWITCH STD RED/GRN LED
IS-C1603 Intelligent Controller User
Manual
7850 East Gelding Drive ? Scottsdale, AZ 85260-3420
Command to download the Repeat timer for user-defined Image Press
This command downloads the timer between repeated transmissions of the user-defined Image press string.
command format:
21H
[ECH] [Timer] [Timer]
transmit format: (xxH) (xxAH) (xxAH) (xxAH)
[ECH] is one byte and must be sent in ASCII HEX format (45H 43H).
[Timer] is one byte and must be sent twice in ASCII HEX format. The default value is 08H.
Approximate repeat time in ms = 13x (Timer value)
The controller responds with 61H and after processing the command 79H.
Command to download user-defined Image Release string for an address.
This command downloads user-defined string for an image release. This string is sent to host every time any
switch released with the assigned address if bit 1 of FLAG-C is enabled.
command format:
21H
[BCH] [Address] [number] [string]
transmit format: (xxH) (xxAH) (xxAH) (xxH) (xxH)
[BCH] is one byte and must be sent in ASCII HEX format (42H 43H).
[Address] is one byte with value of 01H to FFH and must be sent in ASCII HEX format.
[number] is one byte which indicates the number of bytes in the string. Only the lower nibble is used.
[String] may consist of up to a maximum of 15 bytes according to the lower nibble of the [number].
All default values for this section are 00H.
The controller responds with 61H and after processing the command 79H.
6.7 Fonts look-up commands
There are 255 fonts index (01H to FFH) in each font set. The default bit map look-up tables are created for
English ASCII characters index (20H to 7FH). The default values for rest of the fonts are 00H. The user can
download bit map look-up data for all the index location.
These commands are downloaded once and are not normally used during the real-time operation.
Command to download a 5x7 font bit map data to an index (01H to FFH)
This command downloads a font’s bit map data to an index. The index is the character value.
command format:
21H
[BEH] [font index] [font bitmap]
transmit format: (xxH) (xxAH) (xxAH) (xxH)
[BEH] is two byte and must be sent in ASCII HEX format (42 45).
[font index] is one byte with value of 01H to FFH and must be sent in ASCII HEX
format. It is the look-up table index.
[font bitmap] is 7 bytes making up a character graphic. The first byte is the top row of
IS-C1603 Intelligent Controller User Manual D.doc
Toll Free 1.877.2BUYNKK (877.228.9655) ? Phone 480.991.0942 ? Fax 480.998.1435
www.nkkswitches.com ? Email engineering@nkkswitches.com
Page 22 of 52
0110
相关PDF资料
PDF描述
38EWSP71B4M6RT SWITCH PUSH SPDT 0.4VA 20V
38EWSP71B1M7RT SWITCH PUSH SPDT 0.4VA 20V
3314J-1-202G TRIMMER 2K OHM 0.25W SMD
3314J-1-201G TRIMMER 200 OHM 0.25W SMD
CPPT8-LT0RT OSC 3.3V PROG TTL TRI ST 25PPM
相关代理商/技术参数
参数描述
IS-C1603H 功能描述:交换机开发工具 RoHS:否 制造商:NKK Switches 工具用于评估:Smart Switch - Compact RGB 工作电压: 最大工作温度:
ISC1812 制造商:VISHAY 制造商全称:Vishay Siliconix 功能描述:Surface Mount, Molded, Shielded Inductors
ISC-1812 制造商:VISHAY 制造商全称:Vishay Siliconix 功能描述:Surface Mount, Molded, Shielded Inductors