参数资料
型号: LC72134M
元件分类: PLL合成/DDS/VCOs
英文描述: PLL FREQUENCY SYNTHESIZER, 160 MHz, PDSO24
封装: MFP-24
文件页数: 15/27页
文件大小: 463K
代理商: LC72134M
Directly outputting the unlocked state to the DO pin
Since the unlocked state (high level when locked, low when unlocked) is output from the DO pin, the dummy data
processing described above is not necessary. After N is changed, applications can check the locked state after waiting
at least two periods of the reference frequency.
Clock Time Base Usage Notes
When using the clock time base output function, the output pin (BO1) pull-up resistor must have a value of over 100 k
.
The use of a Schmitt input in the microcontroller that accepts this signal is recommended to reduce chattering. This is to
prevent degradation of the VCO C/N characteristics when combining with a loop filter that uses the internal transistor
provided to form a low-pass filter. Since the ground for the clock time base output pin and the ground for the transistor
are common internally on the chip, applications must take care to minimize current fluctuations in the time base pin to
prevent degradation of the low-pass filter characteristics.
No. 5814-22/27
LC72134M
Wait at least 2 reference frequency periods
Valid output data is acquired by using an interval of at
least one reference frequency period
*: Even more reliable recognition of the locked state
can be achieved by performing several checks of the
state and requiring that the locked state be detected
sequentially
Divisor N changed (data input)
Dummy data output
Valid data output
Locked state check*
YES
NO
Outputting the unlocked state data in the serial data
In the LC72134M, the unlocked state data (UL), once set to the unlocked state, is not reset unless data is output (or
input). At the point of data output (1) in figure 3, the VCO frequency will be stable (locked), but since the divisor N
was changed and a data output operation has not yet been performed, the unlocked state data will indicate the unlocked
state. Thus even though the loop is stable (locked), the data will indicate that it is not. In cases such as this, the
application should treat the first data output after the value of N has been changed as dummy data, and consider the
second data output (at point (2) in the figure) as valid data.
<Flowchart for Lock Detection>
A09968
相关PDF资料
PDF描述
LC72135M PLL FREQUENCY SYNTHESIZER, 40 MHz, PDSO20
LC72136NM PLL FREQUENCY SYNTHESIZER, 40 MHz, PDSO24
LC72140M PLL FREQUENCY SYNTHESIZER, 160 MHz, PDSO24
LC72140 PLL FREQUENCY SYNTHESIZER, 160 MHz, PDIP24
LC72146 PLL FREQUENCY SYNTHESIZER, 40 MHz, PDIP24
相关代理商/技术参数
参数描述
LC72135M 制造商:SANYO 制造商全称:Sanyo Semicon Device 功能描述:PLL Frequency Synthesizer for Electronic Tuning
LC72135MA-AE 功能描述:时钟合成器/抖动清除器 RoHS:否 制造商:Skyworks Solutions, Inc. 输出端数量: 输出电平: 最大输出频率: 输入电平: 最大输入频率:6.1 GHz 电源电压-最大:3.3 V 电源电压-最小:2.7 V 封装 / 箱体:TSSOP-28 封装:Reel
LC72135MA-Q-AE 制造商:ON Semiconductor 功能描述:PLL FREQUENCY SYNTHESIZER - Tape and Reel 制造商:ON Semiconductor 功能描述:REEL / PLL FREQUENCY SYNTHESIZER
LC72135M-Q-TLM-E 制造商:SANYO Semiconductor Co Ltd 功能描述:
LC72136 制造商:SANYO 制造商全称:Sanyo Semicon Device 功能描述:PLL Frequency Synthesizer for Electronic Tuning