参数资料
型号: LC72134M
元件分类: PLL合成/DDS/VCOs
英文描述: PLL FREQUENCY SYNTHESIZER, 160 MHz, PDSO24
封装: MFP-24
文件页数: 5/27页
文件大小: 463K
代理商: LC72134M
No. 5814-13/27
LC72134M
Continued from preceding page.
No.
Control block/data
Function
Related data
10
Main charge pump
control data
DLC
Controls the charge pump output (PDa).
* If the circuit deadlocks due to the VCO control voltage (Vtune) being 0 and the VCO being stopped,
applications can get out of the deadlocked state by setting the charge pump output to low and setting
Vtune to VCC. (Deadlock clear circuit)
11
IFS
This data is normally set to 1. Setting this data to 0 sets the circuit to reduced input sensitivity mode, in
which the sensitivity is reduced by about 10 to 30 mV rms.
12
Test data
TEST0 to 2
Test data
TEST0
TEST1
All these bits must be set to 0.
TEST2
All these bits are set to 0 after a power on reset.
13
*
This bit must be set to 0.
14
Sub PLL
programmable
divider data
PS0 to 12
SDVS
Specifies the divisor for the sub PLL programmable divider (FMINb).
This is a binary value in which PS0 is the LSB and PS12 the MSB.
The divisor can be set to a value in the range 272 to 8191. Since the internal divide-by-two prescaler is
used, the actual divisor will be twice the set value.
Sets the sub PLL programmable divider operating state.
*: See the “Structure of the Programmable Divider” section for details.
15
Sub PLL charge
pump control data
SDLC
Forcibly controls the charge pump output (PDb).
* If the circuit deadlocks due to the VCO control voltage (Vtune) being 0 and the VCO being stopped,
applications can get out of the deadlocked state by setting the charge pump output to low and setting
Vtune to VCC. (Deadlock clear circuit)
16
Sub PLL reference
divider data
RS0, RS1
Sub PLL reference frequency (fref) selection data
17
Unlocked state
detection output
switching data
ULa, ULb
The unlocked state information output from the DO pin can be selected to be that for either the main PLL
or the sub PLL.
DLC
Charge pump output
0
Normal operation
1
Forced to low
SDLC
Charge pump output
0
Normal operation
1
Forced to low
SDVS
Operating state
Input pin frequency range
1
The FMINb counter operates
0
The FMINb counter is stopped
10 to 160 MHz
(FMINb is pulled down)
RS1
RS0
Reference frequency
0
50
kHz
0
1
25
1
0
12.5
1
15
ULb
ULa
Unlocked state information
0
No unlocked state information is output. The output data, UL is 1.
0
1
Main PLL unlocked state information
1
0
Sub PLL unlocked state information
1
Main PLL plus sub PLL unlocked state information.
(Indicates that either the main or the sub PLL is unlocked.)
相关PDF资料
PDF描述
LC72135M PLL FREQUENCY SYNTHESIZER, 40 MHz, PDSO20
LC72136NM PLL FREQUENCY SYNTHESIZER, 40 MHz, PDSO24
LC72140M PLL FREQUENCY SYNTHESIZER, 160 MHz, PDSO24
LC72140 PLL FREQUENCY SYNTHESIZER, 160 MHz, PDIP24
LC72146 PLL FREQUENCY SYNTHESIZER, 40 MHz, PDIP24
相关代理商/技术参数
参数描述
LC72135M 制造商:SANYO 制造商全称:Sanyo Semicon Device 功能描述:PLL Frequency Synthesizer for Electronic Tuning
LC72135MA-AE 功能描述:时钟合成器/抖动清除器 RoHS:否 制造商:Skyworks Solutions, Inc. 输出端数量: 输出电平: 最大输出频率: 输入电平: 最大输入频率:6.1 GHz 电源电压-最大:3.3 V 电源电压-最小:2.7 V 封装 / 箱体:TSSOP-28 封装:Reel
LC72135MA-Q-AE 制造商:ON Semiconductor 功能描述:PLL FREQUENCY SYNTHESIZER - Tape and Reel 制造商:ON Semiconductor 功能描述:REEL / PLL FREQUENCY SYNTHESIZER
LC72135M-Q-TLM-E 制造商:SANYO Semiconductor Co Ltd 功能描述:
LC72136 制造商:SANYO 制造商全称:Sanyo Semicon Device 功能描述:PLL Frequency Synthesizer for Electronic Tuning