参数资料
型号: LMK04031BEVAL/NOPB
厂商: National Semiconductor
文件页数: 53/65页
文件大小: 0K
描述: EVAL BOARD LMK04031BISQ
标准包装: 1
系列: PowerWise®
主要目的: 计时,多用途
嵌入式:
已用 IC / 零件: LMK04031
已供物品: 板,线缆,文档,软件
100
1000
10000
100000
OFFSET (Hz)
-170
-160
-150
-140
-130
-120
-110
-100
-90
-80
d
Bc
1000000
10000000
100000000
s yK
^ _, RMS jitter = 224 fs
s yK
^ _, RMS jitter = 167 fs
100
1000
10000
100000
OFFSET (Hz)
-170
-160
-150
-140
-130
-120
-110
-100
-90
-180
d
Bc
1000000
10000000
100000000
s yK
^ _
s yK
^ _
SNOSAZ8J – SEPTEMBER 2008 – REVISED SEPTEMBER 2011
Figure 32. VCXO Phase Noise Comparison, 100 MHz
This plot shows that VCXO “B” exhibits superior phase noise when compared to VCXO “A”. Both VCXOs offer
excellent jitter performance from 100 Hz to 200 kHz. VCXO “A” exhibits RMS jitter of 151 femtoseconds (fs),
while VCXO “B” has RMS jitter of 90 fs.
Figure 33 Figure 34 Figure 35 present a side-by-side comparison of clock output phase noise at 250 MHz,
organized by output format and associated VCXO. The total RMS jitter listed on the plots is integrated from 100
Hz to 20 MHz. Examining these plots, the clock output phase noise associated with VCXO “B” is superior in all
cases. The average improvement in RMS jitter due to VCXO “B” is approximately 47 fs. The plots show the
primary difference in clock output phase noise is in the band from 100 Hz to approximately 4 kHz. Across this
range, the VCXO phase noise dominates that of the PLL, given the loop bandwidth of this design, which is 152
kHz. Above 4 kHz, the PLL noise dominates (inside the loop bandwidth), so it is basically the same for either
VCXO. Comparing the jitter of two VCXOs in the 100 Hz to 4 kHz band, it can be shown that VCXO “A” exhibits
jitter of 142 fs, and VCXO “B” exhibits jitter of 90 fs. The difference, 52 fs, accounts for the majority of the
average difference in RMS jitter at the clock outputs when comparing VCXOs.
The PLL configurations listed below were the same for both VCXOs/LMK040xx pair:
PLL1 loop filter components: C1 = 100 nF, C2 = 680 nF, R2 = 39 k
Ω
PLL1 fPD = 1 MHz, CP gain = 100 A, loop BW = 20 Hz
PLL2 loop filter components: C1 = 0, C2 = 12 nF, R2 = 1.8 k
Ω
PLL2 fPD = 25 MHz, CP gain = 3200 A, loop BW = 152 kHz
Figure 33. LVDS Clock Output Phase Noise Comparison, 250 MHz
Copyright 2008–2011, Texas Instruments Incorporated
57
相关PDF资料
PDF描述
LTC2903CS6-D1#TRMPBF IC QUAD SPLY MONITOR ADJ SOT23-6
3-1906054-1 CA 2MM OFNR 62.5/125,LC SEC GRE
PCV1V820MCL1GS CAP ALUM 82UF 35V 20% SMD
3-1906053-1 CA 2MM OFNR 62.5/125,LC SEC YEL
LMK04033BEVAL/NOPB BOARD EVALUATION LMK04033
相关代理商/技术参数
参数描述
LMK04031BEVALXO 功能描述:时钟和定时器开发工具 LMK04031 EVAL BOARD RoHS:否 制造商:Texas Instruments 产品:Evaluation Modules 类型:Clock Conditioners 工具用于评估:LMK04100B 频率:122.8 MHz 工作电源电压:3.3 V
LMK04031BISQ 制造商:Texas Instruments 功能描述:Clock Conditioner 48-Pin LLP EP T/R
LMK04031BISQ/NOPB 功能描述:时钟合成器/抖动清除器 RoHS:否 制造商:Skyworks Solutions, Inc. 输出端数量: 输出电平: 最大输出频率: 输入电平: 最大输入频率:6.1 GHz 电源电压-最大:3.3 V 电源电压-最小:2.7 V 封装 / 箱体:TSSOP-28 封装:Reel
LMK04031BISQE 制造商:Texas Instruments 功能描述:PRECISION CLOCK CONDITIONER, 48LLP
LMK04031BISQE/NOPB 功能描述:时钟合成器/抖动清除器 RoHS:否 制造商:Skyworks Solutions, Inc. 输出端数量: 输出电平: 最大输出频率: 输入电平: 最大输入频率:6.1 GHz 电源电压-最大:3.3 V 电源电压-最小:2.7 V 封装 / 箱体:TSSOP-28 封装:Reel