- 您现在的位置：买卖IC网 > PDF目录13768 > LMR10510YSDX/NOPB (National Semiconductor)IC REG BUCK ADJ 1A 6LLP PDF资料下载
参数资料
| 型号： | LMR10510YSDX/NOPB |
| 厂商： | National Semiconductor |
| 文件页数： | 10/26页 |
| 文件大小： | 0K |
| 描述： | IC REG BUCK ADJ 1A 6LLP |
| 标准包装： | 4,500 |
| 系列： | SIMPLE SWITCHER® |
| 类型： | 降压（降压） |
| 输出类型： | 可调式 |
| 输出数： | 1 |
| 输出电压： | 0.6 V ~ 4.5 V |
| 输入电压： | 3 V ~ 5.5 V |
| PWM 型： | 电流模式 |
| 频率 - 开关： | 3MHz |
| 电流 - 输出： | 1A |
| 同步整流器： | 无 |
| 工作温度： | -40°C ~ 125°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 6-WDFN 裸露焊盘 |
| 包装： | 带卷 (TR) |
| 供应商设备封装： | 6-LLP-EP（3x3） |
SNVS727B – OCTOBER 2011 – REVISED APRIL 2013
Design Guide
INDUCTOR SELECTION
The Duty Cycle (D) can be approximated quickly using the ratio of output voltage (V O ) to input voltage (V IN ):
D=
V OUT
V IN
The catch diode (D1) forward voltage drop and the voltage drop across the internal PMOS must be included to
calculate a more accurate duty cycle. Calculate D by using the following formula:
D=
V OUT + V D
V IN + V D - V SW
V SW can be approximated by:
V SW = I OUT x R DSON
The diode forward drop (V D ) can range from 0.3V to 0.7V depending on the quality of the diode. The lower the
V D , the higher the operating efficiency of the converter. The inductor value determines the output ripple current.
Lower inductor values decrease the size of the inductor, but increase the output ripple current. An increase in the
inductor value will decrease the output ripple current.
One must ensure that the minimum current limit (1.2A) is not exceeded, so the peak current in the inductor must
be calculated. The peak current (I LPK ) in the inductor is calculated by:
I LPK = I OUT + Δ i L
' i L
I OUT
V IN - V OUT
L
V OUT
L
DT S
T S
t
Figure 23. Inductor Current
V IN - V OUT
L
=
2 ' i L
DT S
In general,
Δ i L = 0.1 x (I OUT ) → 0.2 x (I OUT )
If Δ i L = 20% of 1A, the peak current in the inductor will be 1.2A. The minimum specified current limit over all
operating conditions is 1.2A. One can either reduce Δ i L , or make the engineering judgment that zero margin will
be safe enough. The typical current limit is 1.75A.
The LMR10510 operates at frequencies allowing the use of ceramic output capacitors without compromising
transient response. Ceramic capacitors allow higher inductor ripple without significantly increasing output ripple.
See the OUTPUT CAPACITOR section for more details on calculating output voltage ripple. Now that the ripple
current is determined, the inductance is calculated by:
L=
DT S
2 ' i L
x (V IN - V OUT )
where
?
T S =
1
f S
10
Product Folder Links: LMR10510
Copyright ? 2011–2013, Texas Instruments Incorporated
相关PDF资料 |
PDF描述 |
|---|---|
| HBC08DRAH-S734 | CONN EDGECARD 16POS .100 R/A PCB |
| GEC31DRYI-S734 | CONN EDGECARD 62POS DIP .100 SLD |
| GMC10DRXN-S734 | CONN EDGECARD 20POS DIP .100 SLD |
| GBC28DRXI-S734 | CONN EDGECARD 56POS DIP .100 SLD |
| FAN5361UC19X | IC REG BUCK SYNC 1.9V 6-WLCSP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LMR10515 | 制造商:TI 制造商全称:Texas Instruments 功能描述:SIMPLE SWITCHER? 5.5Vin, 1.5A Step-Down Voltage Regulator in SOT-23 and LLP |
| LMR10515XMF | 制造商:Texas Instruments 功能描述:BUCK, 1.5A, 5.5VIN 制造商:Texas Instruments 功能描述:BUCK, 1.5A, 5.5VIN; Primary Input Voltage:5.5V; No. of Outputs:1; Output Voltage:4.5V; Output Current:1.5A; Voltage Regulator Case Style:SOT-23; No. of Pins:5; Operating Temperature Min:-40C; Operating Temperature Max:125C; SVHC:No;RoHS Compliant: Yes |
| LMR10515XMF/NOPB | 功能描述:直流/直流开关调节器 SIMPLE SWITCHER 5.5 Vin,1.5A SD Vltg Reg RoHS:否 制造商:International Rectifier 最大输入电压:21 V 开关频率:1.5 MHz 输出电压:0.5 V to 0.86 V 输出电流:4 A 输出端数量: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:PQFN 4 x 5 |
| LMR10515XMFE | 制造商:TI 制造商全称:Texas Instruments 功能描述:SIMPLE SWITCHER? 5.5Vin, 1.5A Step-Down Voltage Regulator in SOT-23 and LLP |
| LMR10515XMFE/NOPB | 功能描述:直流/直流开关调节器 SIMPLE SWITCHER 5.5 Vin,1.5A SD Vltg Reg RoHS:否 制造商:International Rectifier 最大输入电压:21 V 开关频率:1.5 MHz 输出电压:0.5 V to 0.86 V 输出电流:4 A 输出端数量: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:PQFN 4 x 5 |
发布紧急采购，3分钟左右您将得到回复。