参数资料
| 型号： | LT3587EUD#TRPBF |
| 厂商： | Linear Technology |
| 文件页数： | 7/24页 |
| 文件大小： | 0K |
| 描述： | IC REG BOOST INV ADJ DL 20QFN |
| 标准包装： | 2,500 |
| 类型： | 升压（升压），反相 |
| 输出类型： | 可调式 |
| 输出数： | 2 |
| 输出电压： | 可调至 ±32V |
| 输入电压： | 2.5 V ~ 6 V |
| PWM 型： | 电流模式 |
| 频率 - 开关： | 1MHz |
| 同步整流器： | 无 |
| 工作温度： | -40°C ~ 125°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 20-WFQFN 裸露焊盘 |
| 包装： | 带卷 (TR) |
| 供应商设备封装： | 20-QFN 裸露焊盘（3x3） |
LT3587
PIN FUNCTIONS
V OUT1 (Pin 14): Boost1 Output Pin. This pin is the drain
of an output disconnect PMOS transistor.
FB1 (Pin 15): Boost1 Output Voltage Feedback Pin. Con-
nect a resistor R FB1 from this pin to V OUT1 (or CAP1)
such that:
R FB1 = ((V VOUT1 /1.22V) – 1) ? 88.5k
There is an internal 88.5k resistor from the FB1 pin to
ground.
EN/SS1 (Pin 16): Boost1/Inverter Shutdown and Soft-Start
Pin. Boost1 and Inverter are enabled when the voltage
on this pin is greater than 2.5V. They are disabled when
the voltage is below 0.2V. An internal 1μA current source
in conjunction with an external capacitor can be used to
ramp this pin and provide soft-start.
V IN (Pin 17): Input Supply Pin. Must be locally bypassed
V FB3 (Pin 20): Boost3 Output Voltage Feedback Pin. Con-
nect a resistor R VFB3 from this pin to V OUT3 (or CAP3)
such that:
R VFB3 = ((V VOUT3 /0.8V) – 1) ? 56.3k
There is an internal 56.3k resistor from the V FB3 pin to
ground. In the current regulator con?guration, R VFB3 can
be optionally used to limit the maximum output voltage
to V CLAMP , such that:
R VFB3 = ((V CLAMP /0.8V) – 1) ? 56.3k
Note: When no voltage clamp is desired in the current
regulator con?guration, tie V FB3 to GND.
Exposed Pad (Pin 21): Ground Pin. Connect to PCB ground
plane. Ground plane connection through multiple vias under
the package is recommended for optimum electrical and
thermal performance.
with an X5R or X7R type ceramic capacitor.
EN/SS3 (Pin 18): Boost3 Shutdown and Soft-Start Pin.
Boost3 is enabled when the voltage on this pin is greater
than 2V. It is disabled when the voltage is below 0.2V. An
internal 1μA current source in conjunction with an exter-
nal capacitor can be used to ramp this pin and provide
soft-start.
I FB3 (Pin 19): Boost3 Output Current Programming Pin.
Connect a resistor R IFB3 from this pin to ground such
that:
R IFB3 = 200 ? (0.8V/I VOUT3 )
If Boost3 output is con?gured as a voltage regulator,
R IFB3 can be optionally used to limit the maximum output
current to I LIMIT :
R IFB3 = 200 ? (0.8V/I LIMIT )
Note: Tie I FB3 to GND when no current limit is desired.
3587fc
7
相关PDF资料 |
PDF描述 |
|---|---|
| LT3640IFE#TRPBF | IC REG BUCK FIX/ADJ DL 28TSSOP |
| LT3641HFE#TRPBF | IC REG BUCK SYNC ADJ DL 28TSSOP |
| LT3650IMSE-8.4#TRPBF | IC CHARGER LI-ION 8.4V 2A 12MSOP |
| LT3652EMSE#PBF | IC BATTERY CHARGER SOLAR 12MSOP |
| LT3653IDCB#TRPBF | IC REG BUCK ADJ 1.2A 8DFN |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LT3590 | 制造商:LINER 制造商全称:Linear Technology 功能描述:60V Triple Step-Down LED Driver Programmable Temperature Protection |
| LT3590EDC#PBF | 制造商:Linear Technology 功能描述:IC LED DRIVER BULK MODE 48V 制造商:Linear Technology 功能描述:IC, LED DRIVER, BULK MODE, 48V |
| LT3590EDC#TRMPBF | 功能描述:IC LED DRIVER WHITE BCKLGT 6-DFN RoHS:是 类别:集成电路 (IC) >> PMIC - LED 驱动器 系列:- 标准包装:6,000 系列:- 恒定电流:- 恒定电压:- 拓扑:开路漏极，PWM 输出数:4 内部驱动器:是 类型 - 主要:LED 闪烁器 类型 - 次要:- 频率:400kHz 电源电压:2.3 V ~ 5.5 V 输出电压:- 安装类型:表面贴装 封装/外壳:8-VFDFN 裸露焊盘 供应商设备封装:8-HVSON 包装:带卷 (TR) 工作温度:-40°C ~ 85°C 其它名称:935286881118PCA9553TK/02-TPCA9553TK/02-T-ND |
| LT3590EDC#TRPBF | 功能描述:IC LED DRIVER WHITE BCKLGT 6-DFN RoHS:是 类别:集成电路 (IC) >> PMIC - LED 驱动器 系列:- 标准包装:6,000 系列:- 恒定电流:- 恒定电压:- 拓扑:开路漏极，PWM 输出数:4 内部驱动器:是 类型 - 主要:LED 闪烁器 类型 - 次要:- 频率:400kHz 电源电压:2.3 V ~ 5.5 V 输出电压:- 安装类型:表面贴装 封装/外壳:8-VFDFN 裸露焊盘 供应商设备封装:8-HVSON 包装:带卷 (TR) 工作温度:-40°C ~ 85°C 其它名称:935286881118PCA9553TK/02-TPCA9553TK/02-T-ND |
| LT3590EDC-PBF | 制造商:LINER 制造商全称:Linear Technology 功能描述:48V Buck Mode LED Driver in SC70 and 2mm x 2mm DFN |
发布紧急采购，3分钟左右您将得到回复。