参数资料
型号: LTC2435-1CGN#PBF
厂商: Linear Technology
文件页数: 15/42页
文件大小: 0K
描述: IC ADC DIFF I/REF 20BIT 16-SSOP
标准包装: 100
位数: 20
采样率(每秒): 13.75
数据接口: MICROWIRE?,串行,SPI?
转换器数目: 2
功率耗散(最大): 1mW
电压电源: 单电源
工作温度: 0°C ~ 70°C
安装类型: 表面贴装
封装/外壳: 16-SSOP(0.154",3.90mm 宽)
供应商设备封装: 16-SSOP
包装: 管件
输入数目和类型: 1 个差分,双极
LTC2435/LTC2435-1
22
24351fc
For more information www.linear.com/LTC2435
applicaTions inForMaTion
Internal Serial Clock, Single Cycle Operation
This timing mode uses an internal serial clock to shift
out the conversion result and a CS signal to monitor and
control the state of the conversion cycle, see Figure 11.
In order to select the internal serial clock timing mode,
the serial clock pin (SCK) must be floating (Hi-Z) or pulled
HIGH prior to the falling edge of CS. The device will not
enter the internal serial clock mode if SCK is driven LOW
on the falling edge of CS. An internal weak pull-up resis-
tor is active on the SCK pin during the falling edge of CS;
therefore,theinternalserialclocktimingmodeisautomati-
cally selected if SCK is not externally driven.
The serial data output pin (SDO) is Hi-Z as long as CS is
HIGH. At any time during the conversion cycle, CS may be
pulled LOW in order to monitor the state of the converter.
Once CS is pulled LOW, SCK goes LOW and EOC is output
to the SDO pin. EOC = 1 while a conversion is in progress
and EOC = 0 if the conversion is over.
When testing EOC, if the conversion is complete (EOC =
0), the device will exit the sleep state and enter the data
output state. In order to allow the device to return to the
sleep state, CS must be pulled HIGH before the first ris-
ing edge of SCK. In the internal SCK timing mode, SCK
goes HIGH and the device begins outputting data at time
tEOCtest after the falling edge of CS (if EOC = 0) or tEOCtest
after EOC goes LOW (if CS is LOW during the falling edge
of EOC). The value of tEOCtest is 23s (LTC2435), 26s
(LTC2435-1) if the device is using its internal oscillator
(F0 = logic LOW or HIGH). If FO is driven by an external
oscillator of frequency fEOSC, then tEOCtest is 3.6/fEOSC. If
CS is pulled HIGH before time tEOCtest, the device returns
to the sleep state. The conversion result is held in the
internal static shift register.
If CS remains LOW longer than tEOCtest, the first rising
edge of SCK will occur and the conversion result is serially
shifted out of the SDO pin. The data output cycle begins
on this first rising edge of SCK and concludes after the
Figure 11. Internal Serial Clock, Single Cycle Operation
SDO
SCK
(INTERNAL)
CS
MSB
LSB
SIG
BIT 0
BIT 5
TEST EOC
BIT 19
BIT 18
BIT 20
BIT 21
BIT 22
EOC
BIT 23
SLEEP
DATA OUTPUT
CONVERSION
2435 F11
<tEOCtest
VCC
10k
Hi-Z
TEST EOC
VCC
FO
REF+
REF
SCK
IN+
IN
SDO
GND
CS
2
14
3
4
13
5
6
12
1, 7, 8, 9, 10, 15, 16
11
REFERENCE
VOLTAGE
0.1V TO VCC
ANALOG INPUT RANGE
–0.5VREF TO 0.5VREF
3-WIRE
SPI INTERFACE
1
F
2.7V TO 5.5V
LTC2435/
LTC2435-1
= 50Hz REJECTION (LTC2435)
= EXTERNAL OSCILLATOR
= 60Hz REJECTION (LTC2435)
= 50Hz/60Hz REJECTION (LTC2435-1)
VCC
相关PDF资料
PDF描述
AD8611ARZ-REEL7 IC COMP SGL 4NS ULTRFAST 8SOIC
AD7823YRZ IC ADC 8BIT SRL 2.7/5.5V 8-SOIC
LTC1540IMS8#TRPBF IC COMP NANOPOWER W/REF 8-MSOP
ISL4489EIBZ TRANSCEIVER RS-485/422 14-SOIC
LTC1540IMS8#TR IC COMP 300NA 2% VOLT REF 8-MSOP
相关代理商/技术参数
参数描述
LTC2435-1IGN 功能描述:IC CONV A/D 20BIT DIFF 16-SSOP RoHS:否 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:2,500 系列:- 位数:16 采样率(每秒):15 数据接口:MICROWIRE?,串行,SPI? 转换器数目:1 功率耗散(最大):480µW 电压电源:单电源 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:38-WFQFN 裸露焊盘 供应商设备封装:38-QFN(5x7) 包装:带卷 (TR) 输入数目和类型:16 个单端,双极;8 个差分,双极 配用:DC1011A-C-ND - BOARD DELTA SIGMA ADC LTC2494
LTC2435-1IGN#PBF 功能描述:IC ADC DIFF I/REF 20BIT 16-SSOP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:2,500 系列:- 位数:16 采样率(每秒):15 数据接口:MICROWIRE?,串行,SPI? 转换器数目:1 功率耗散(最大):480µW 电压电源:单电源 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:38-WFQFN 裸露焊盘 供应商设备封装:38-QFN(5x7) 包装:带卷 (TR) 输入数目和类型:16 个单端,双极;8 个差分,双极 配用:DC1011A-C-ND - BOARD DELTA SIGMA ADC LTC2494
LTC2435-1IGN#TR 功能描述:IC CONV A/D 20BIT DIFF 16-SSOP RoHS:否 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1,000 系列:- 位数:16 采样率(每秒):45k 数据接口:串行 转换器数目:2 功率耗散(最大):315mW 电压电源:模拟和数字 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:28-SOIC(0.295",7.50mm 宽) 供应商设备封装:28-SOIC W 包装:带卷 (TR) 输入数目和类型:2 个单端,单极
LTC2435-1IGN#TRPBF 功能描述:IC ADC DIFF I/REF 20BIT 16-SSOP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1,000 系列:- 位数:16 采样率(每秒):45k 数据接口:串行 转换器数目:2 功率耗散(最大):315mW 电压电源:模拟和数字 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:28-SOIC(0.295",7.50mm 宽) 供应商设备封装:28-SOIC W 包装:带卷 (TR) 输入数目和类型:2 个单端,单极
LTC2435CGN 功能描述:IC ADC DIFF I/REF 20BIT 16-SSOP RoHS:否 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:2,500 系列:- 位数:16 采样率(每秒):15 数据接口:MICROWIRE?,串行,SPI? 转换器数目:1 功率耗散(最大):480µW 电压电源:单电源 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:38-WFQFN 裸露焊盘 供应商设备封装:38-QFN(5x7) 包装:带卷 (TR) 输入数目和类型:16 个单端,双极;8 个差分,双极 配用:DC1011A-C-ND - BOARD DELTA SIGMA ADC LTC2494