参数资料
型号: LTC2486IDE#PBF
厂商: Linear Technology
文件页数: 18/36页
文件大小: 0K
描述: IC ADC 16BIT W/PGA 14-DFN
标准包装: 91
位数: 16
采样率(每秒): 15
数据接口: MICROWIRE?,串行,SPI?
转换器数目: 1
功率耗散(最大): 800µW
电压电源: 单电源
工作温度: -40°C ~ 85°C
安装类型: 表面贴装
封装/外壳: 14-WFDFN 裸露焊盘
供应商设备封装: 14-DFN-EP(4x3)
包装: 管件
输入数目和类型: 4 个单端,双极;2 个差分,双极
产品目录页面: 1348 (CN2011-ZH PDF)
配用: DC1009A-C-ND - BOARD DELTA SIGMA ADC LTC2486
LTC2486
25
2486fd
APPLICATIONS INFORMATION
Figure 11. Internal Serial Clock, Continuous Operation
The input data is shifted through the SDI pin on the ris-
ing edge of SCK (including the rst rising edge) and the
output data is shifted out the SDO pin on the falling edge
of SCK. The data input/output cycle is concluded and a
new conversion automatically begins after the 24th rising
edge of SCK. During the next conversion, SCK and SDO
remain HIGH until the conversion is complete.
The Use of a 10k Pull-Up on SCK for Internal SCK
Selection
If CS is pulled HIGH while the converter is driving SCK
LOW, the internal pull-up is not available to restore SCK
to a logic HIGH state if SCK is oating. This will cause the
device to exit the internal SCK mode on the next falling
edge of CS. This can be avoided by adding an external 10k
pull-up resistor to the SCK pin.
Whenever SCK is LOW, the LTC2486’s internal pull-up at
SCK is disabled. Normally, SCK is not externally driven if
the device is operating in the internal SCK timing mode.
However, certain applications may require an external
EOC
CS
SCK
(INTERNAL)
SDI
SDO
2486 F11
CONVERSION
DATA INPUT/OUTPUT
BIT 20 BIT 19 BIT 18 BIT 17 BIT 16 BIT 15 BIT 14 BIT 13
BIT 12 BIT 11
BIT 21
BIT 22
BIT 23
1
0
EN
SGL
A2
A1
A0
EN2
IM
FA
FB
SPD
GS2
GS1
GS0
ODD
BIT 10
BIT 9
BIT 0
23
1
4
5
6
7
8
9
10
11
121314
1516
24
DON'T CARE
MSB
SIG
“0”
VCC
fO
SCK
SDI
SDO
CS
GND
REFERENCE
VOLTAGE
0.1V TO VCC
ANALOG
INPUTS
= EXTERNAL OSCILLATOR
= INTERNAL OSCILLATOR
LTC2486
3-WIRE
SPI INTERFACE
OPTIONAL
10k
VCC
REF+
REF
CH0
CH1
CH2
CH3
COM
12
1
13
14
8
9
10
11
7
3
5
6
4
2
2.7V TO 5.5V
0.1μF
10μF
CONVERSION
driver on SCK. If the driver goes Hi-Z after outputting a
LOW signal, the internal pull-up is disabled. An external
10k pull-up resistor prevents the device from exiting the
internal SCK mode under this condition.
A similar situation may occur during the sleep state when
CS is pulsed HIGH-LOW-HIGH in order to test the conver-
sion status. If the device is in the sleep state (EOC = 0),
SCK will go LOW. If CS goes HIGH before the time tEOCtest,
the internal pull-up is activated. If SCK is heavily loaded,
the internal pull-up may not restore SCK to a HIGH state
before the next falling edge of CS. The external 10k pull-up
resistor prevents the device from exiting the internal SCK
mode under this condition.
PRESERVING THE CONVERTER ACCURACY
The LTC2486 is designed to reduce as much as possible
sensitivity to device decoupling, PCB layout, anti-aliasing
circuits, line frequency perturbations, and temperature
sensitivity. In order to achieve maximum performance a
few simple precautions should be observed.
相关PDF资料
PDF描述
AD8561AR-REEL IC COMP 7NS ULTRA-FAST 8-SOIC
HIN213EIBZ IC 4DRVR/5RCVR RS232 5V 28-SOIC
LTC1444CDHD#PBF IC COMP QD LP 1.221VREF 16-DFN
LTC1445CDHD#PBF IC COMP QD LP 1.221VREF 16-DFN
LTC2487IDE#PBF IC ADC 16BIT DELTA SIG 14-DFN
相关代理商/技术参数
参数描述
LTC2487CDE#PBF 功能描述:IC ADC 16BIT DELTA SIG 14-DFN RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1,000 系列:- 位数:16 采样率(每秒):45k 数据接口:串行 转换器数目:2 功率耗散(最大):315mW 电压电源:模拟和数字 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:28-SOIC(0.295",7.50mm 宽) 供应商设备封装:28-SOIC W 包装:带卷 (TR) 输入数目和类型:2 个单端,单极
LTC2487CDE#TRPBF 功能描述:IC ADC 16BIT DELTA SIG 14-DFN RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:2,500 系列:- 位数:16 采样率(每秒):15 数据接口:MICROWIRE?,串行,SPI? 转换器数目:1 功率耗散(最大):480µW 电压电源:单电源 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:38-WFQFN 裸露焊盘 供应商设备封装:38-QFN(5x7) 包装:带卷 (TR) 输入数目和类型:16 个单端,双极;8 个差分,双极 配用:DC1011A-C-ND - BOARD DELTA SIGMA ADC LTC2494
LTC2487IDE#PBF 功能描述:IC ADC 16BIT DELTA SIG 14-DFN RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1 系列:microPOWER™ 位数:8 采样率(每秒):1M 数据接口:串行,SPI? 转换器数目:1 功率耗散(最大):- 电压电源:模拟和数字 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:24-VFQFN 裸露焊盘 供应商设备封装:24-VQFN 裸露焊盘(4x4) 包装:Digi-Reel® 输入数目和类型:8 个单端,单极 产品目录页面:892 (CN2011-ZH PDF) 其它名称:296-25851-6
LTC2487IDE#TRPBF 功能描述:IC ADC 16BIT DELTA SIG 14-DFN RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:2,500 系列:- 位数:16 采样率(每秒):15 数据接口:MICROWIRE?,串行,SPI? 转换器数目:1 功率耗散(最大):480µW 电压电源:单电源 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:38-WFQFN 裸露焊盘 供应商设备封装:38-QFN(5x7) 包装:带卷 (TR) 输入数目和类型:16 个单端,双极;8 个差分,双极 配用:DC1011A-C-ND - BOARD DELTA SIGMA ADC LTC2494
LTC2488CDE#PBF 功能描述:IC ADC 16BIT DELTA SIG 14-DFN RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1 系列:microPOWER™ 位数:8 采样率(每秒):1M 数据接口:串行,SPI? 转换器数目:1 功率耗散(最大):- 电压电源:模拟和数字 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:24-VFQFN 裸露焊盘 供应商设备封装:24-VQFN 裸露焊盘(4x4) 包装:Digi-Reel® 输入数目和类型:8 个单端,单极 产品目录页面:892 (CN2011-ZH PDF) 其它名称:296-25851-6