- 您现在的位置：买卖IC网 > PDF目录13814 > LTC3613IWKH#PBF (Linear Technology)IC REG BUCK SYNC ADJ 15A 56QFN PDF资料下载
参数资料
| 型号： | LTC3613IWKH#PBF |
| 厂商： | Linear Technology |
| 文件页数： | 8/36页 |
| 文件大小： | 0K |
| 描述： | IC REG BUCK SYNC ADJ 15A 56QFN |
| 标准包装： | 40 |
| 类型： | 降压（降压） |
| 输出类型： | 可调式 |
| 输出数： | 1 |
| 输出电压： | 0.6 V ~ 5.5 V |
| 输入电压： | 4.5 V ~ 24 V |
| PWM 型： | 电流模式 |
| 频率 - 开关： | 200kHz ~ 1MHz |
| 电流 - 输出： | 15A |
| 同步整流器： | 是 |
| 工作温度： | -40°C ~ 125°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 56-VFQFN 裸露焊盘 |
| 包装： | 管件 |
| 供应商设备封装： | 56-QFN 多焊盘（7x9） |
第1页第2页第3页第4页第5页第6页第7页当前第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页
LTC3613
PIN FUNCTIONS
PV IN (Pins 1-9, 53-56, 57 Exposed Pad): Power Supply
Inputs. These pins connect to the drain of the internal
power MOSFETS. The PV IN exposed pad must be soldered
to the circuit board for electrical contact and rated thermal
performance. The supply voltage can range from 4.5V to
24V. The voltage on this pin is also used to adjust the TG
on-time in order to maintain constant frequency operation.
SW (Pins 10, 35, 45-51, 58 Exposed Pad): Switch Node
Connection. The (–) terminal of the bootstrap capacitor,
C B , connects to this node. This pin swings from a diode
voltage below ground up to V IN . The SW exposed pad must
be soldered to the circuit board for electrical contact and
rated thermal performance.
BOOST (Pin 11): Boosted Driver Supply Connection. The
(+) terminal of the bootstrap capacitor, C B , as well as
the cathode of the Schottky diode, D B , connects to this
node. This node swings from INTV CC – V SCHOTTKY to V IN
+ INTV CC – V SCHOTTKY .
SGND (Pins 12, 16, 17, 19, 28, 29, 59 Exposed Pad):
Signal Ground Connection. The SGND exposed pad must
be soldered to the circuit board for electrical contact and
rated thermal performance. All small-signal components
should be connected to the signal ground. Connect signal
ground to power ground only at one point using a single
PCB trace.
PGOOD (Pin 13): Power Good Indicator Output. This
open-drain logic output is pulled to ground when the
output voltage is outside of a ±7.5% window around the
regulation point.
SENSE + (Pin 14): Differential Current Sensing (+) Input.
For R SENSE current sensing, Kelvin (4-wire) connect
SENSE + and SENSE – pins across the sense resistor. For
DCR sensing, Kelvin connect SENSE + and SENSE – pins
across the sense filter capacitor.
SENSE – (Pin 15): Differential Current Sensing (–) Input.
For R SENSE current sensing, Kelvin (4-wire) connect the
SENSE + and SENSE – pins across the sense resistor. For
DCR sensing, Kelvin connect the SENSE + and SENSE – pins
across the sense filter capacitor.
V OUT (Pin 18): Output voltage sense for adjusting the
on-time for constant frequency operation. Tying this pin to
the local output (instead of the remote output) is recom-
mended for most applications. This pin can be programmed
as needed for achieving the steady-state on-time required
for constant frequency operation.
V OSNS– (Pin 20): Differential Output Sensing (–) Input.
Connect this pin to the negative terminal of the output
capacitor. There is a bias current of 35μA (typical) flowing
out of this pin.
V OSNS+ (Pin 21): Differential Output Sensing (+) Input.
Connect this pin to the feedback resistor divider between
the positive and negative output capacitor terminals. In
normal operation the LTC3613 will regulate the differen-
tial output voltage which is divided down to 0.6V by the
feedback resistor divider.
TRACK/SS (Pin 22): External Tracking and Soft-Start Input.
The LTC3613 regulates the differential feedback voltage
(V OSNS+ ? V OSNS– ) to the smaller of 0.6V or the voltage
on the TRACK/SS pin. An internal 1.0μA pull-up current
source is connected to this pin. A capacitor to ground at
this pin sets the ramp time to the final regulated output
voltage. Alternatively, another voltage supply connected
through a resistor divider to this pin allows the output to
track the other supply during start-up.
ITH (Pin 23): Current Control Voltage and Switching Regu-
lator Compensation Point. The current sense threshold
increases with this control voltage which ranges from
0V to 2.4V.
V RNG (Pin 24): Current Sense Voltage Range Input. The
maximum allowed sense voltage between SENSE + and
SENSE – is equal to 0.05 ? V RNG . If V RNG is tied to SGND,
the device operates with a maximum sense voltage of
30mV. If V RNG is tied to INTV CC , the device operates with
a maximum sense voltage of 50mV.
RT (Pin 25): Switching Frequency Programming Pin.
Connect an external resistor from RT to signal ground to
program the switching frequency between 200kHz and
1MHz. An external clock applied to MODE/PLLIN must
be within ±30% of this free-running frequency to ensure
frequency lock.
3613fa
8
相关PDF资料 |
PDF描述 |
|---|---|
| 35PX220MEFCT78X11.5 | CAP ALUM 220UF 35V 20% RADIAL |
| 35PX220MEFCTA8X11.5 | CAP ALUM 220UF 35V 20% RADIAL |
| UVR1C471MPD1TD | CAP ALUM 470UF 16V 20% RADIAL |
| 10ML470MEFCT78X9 | CAP ALUM 470UF 10V 20% RADIAL |
| 10ML470MEFCTA8X9 | CAP ALUM 470UF 10V 20% RADIAL |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LTC3614EUDD#PBF | 功能描述:IC REG BUCK SYNC ADJ 4A 24QFN RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:- 标准包装:250 系列:- 类型:降压（降压） 输出类型:固定 输出数:1 输出电压:1.2V 输入电压:2.05 V ~ 6 V PWM 型:电压模式 频率 - 开关:2MHz 电流 - 输出:500mA 同步整流器:是 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:6-UFDFN 包装:带卷 (TR) 供应商设备封装:6-SON（1.45x1） 产品目录页面:1032 (CN2011-ZH PDF) 其它名称:296-25628-2 |
| LTC3614EUDD#TRPBF | 功能描述:IC REG BUCK SYNC ADJ 4A 24QFN RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:- 标准包装:2,500 系列:- 类型:降压（降压） 输出类型:固定 输出数:1 输出电压:1.2V，1.5V，1.8V，2.5V 输入电压:2.7 V ~ 20 V PWM 型:- 频率 - 开关:- 电流 - 输出:50mA 同步整流器:是 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:10-TFSOP，10-MSOP（0.118"，3.00mm 宽）裸露焊盘 包装:带卷 (TR) 供应商设备封装:10-MSOP 裸露焊盘 |
| LTC3614IUDD#PBF | 功能描述:IC REG BUCK SYNC ADJ 4A 24QFN RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:- 设计资源:Design Support Tool 标准包装:1 系列:- 类型:升压（升压） 输出类型:固定 输出数:1 输出电压:3V 输入电压:0.75 V ~ 2 V PWM 型:- 频率 - 开关:- 电流 - 输出:100mA 同步整流器:是 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:SOT-23-5 细型，TSOT-23-5 包装:剪切带 (CT) 供应商设备封装:TSOT-23-5 其它名称:AS1323-BTTT-30CT |
| LTC3614IUDD#TRPBF | 功能描述:IC REG BUCK SYNC ADJ 4A 24QFN RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:- 设计资源:Design Support Tool 标准包装:1 系列:- 类型:升压（升压） 输出类型:固定 输出数:1 输出电压:3V 输入电压:0.75 V ~ 2 V PWM 型:- 频率 - 开关:- 电流 - 输出:100mA 同步整流器:是 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:SOT-23-5 细型，TSOT-23-5 包装:剪切带 (CT) 供应商设备封装:TSOT-23-5 其它名称:AS1323-BTTT-30CT |
| LTC3614MPUDD#PBF | 制造商:Linear Technology 功能描述:IC REG BUCK SYNC ADJ 4A 24QFN |
发布紧急采购，3分钟左右您将得到回复。