- 您现在的位置：买卖IC网 > PDF目录16300 > LTC4011CFE#PBF (Linear Technology)IC BATT CHARGER HIEFF 20TSSOP PDF资料下载
参数资料
| 型号： | LTC4011CFE#PBF |
| 厂商： | Linear Technology |
| 文件页数： | 9/26页 |
| 文件大小： | 0K |
| 描述： | IC BATT CHARGER HIEFF 20TSSOP |
| 标准包装： | 74 |
| 功能： | 充电管理 |
| 电池化学： | 镍镉（NiCd）、镍金属氢化物（NiMH） |
| 电源电压： | 4.5 V ~ 34 V |
| 工作温度： | 0°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 20-TSSOP（0.173"，4.40mm 宽）裸露焊盘 |
| 供应商设备封装： | 20-TSSOP-EP |
| 包装： | 管件 |
| 产品目录页面： | 1341 (CN2011-ZH PDF) |
LTC4011
PIN FUNCTIONS
V CDIV (Pin 9): Average Cell Voltage Resistor Divider Termi-
nation. The LTC4011 connects this pin to GND provided the
charger is not in shutdown. V CDIV is an open-drain output
to GND with an operating voltage range of GND to BAT.
TIMER (Pin 10): Charge Timer Input. A resistor connected
between TIMER and GND programs charge cycle timing
limits. Refer to the Applications Information section for
complete details. Operating voltage range is GND to 1V.
SENSE (Pin 11): Charge Current Sense Input. An external
resistor between this input and BAT is used to program
charge current. Refer to the Applications Information
section for complete details on programming charge
current. Operating voltage ranges from (BAT – 50mV) to
(BAT + 200mV).
BAT (Pin 12): Battery Pack Connection. The LTC4011 uses
the voltage on this pin to control current sourced from
V CC to the battery during charging. Allowable operating
voltage range is GND to V CC .
TOC (Pin 13): Active-Low Top-Off Charge Indicator Out-
put. The LTC4011 indicates the top-off charge state for
NiMH batteries by connecting this pin to GND. Refer to
the Operation and Applications Information sections for
further details. This output is capable of driving an LED
and should be left floating if not used. TOC is an open-
drain output to GND with an operating voltage range of
GND to V CC .
INTV DD (Pin 14): Internal 5V Regulator Output. This pin
provides a means of bypassing the internal 5V regulator
used to power the BGATE output driver. Typically, power
should not be drawn from this pin by the application
circuit. Refer to the Application Information section for
additional details.
BGATE (Pin 15): External Synchronous N-channel MOSFET
Gate Control Output. This output provides gate drive to
an optional external NMOS power transistor switch used
for synchronous rectification to increase efficiency in the
step-down DC/DC converter. Operating voltage is GND to
INTV DD . BGATE should be left floating if not used.
PGND (Pin 16): Power Ground. This pin provides a return
for switching currents generated by internal LTC4011 cir-
cuits. Externally, PGND and GND should be wired together
using a very low impedance connection. Refer to PCB
Layout Considerations in the Applications Information
section for additional grounding details.
TGATE (Pin 17): External P-channel MOSFET Gate Control
Output. This output provides gate drive to an external PMOS
power transistor switch used in the DC/DC converter. Op-
erating voltage range varies as a function of V CC . Refer to
the Electrical Characteristics table for specific voltages.
V CC (Pin 18): Power Input. External PowerPath control
circuits normally connect either the DC input power sup-
ply or the battery to this pin. Refer to the Applications
Information section for further details. Suggested applied
voltage range is GND to 34V.
READY (Pin 19): Active-Low Ready-to-Charge Output.
The LTC4011 connects this pin to GND if proper operating
voltages for charging are present. Refer to the Operation
section for complete details on charge qualification. This
output is capable of driving an LED and should be left
floating if not used. READY is an open-drain output to
GND with an operating voltage range of GND to V CC .
INFET (Pin 20): PowerPath Control Output. For very low
dropout applications, this output may be used to drive
the gate of an input PMOS pass transistor connected
between the DC input (DCIN) and the raw system supply
rail (V CC ). INFET is internally clamped about 6V below V CC .
Maximum operating voltage is V CC . INFET should be left
floating if not used.
Exposed Pad (Pin 21): This pin provides enhanced
thermal properties for the TSSOP. It must be soldered
to the PCB copper ground to obtain optimum thermal
performance.
4011fb
相关PDF资料 |
PDF描述 |
|---|---|
| EEC49DRYS | CONN EDGECARD 98POS DIP .100 SLD |
| EMC12DRTN | CONN EDGECARD 24POS .100 EXTEND |
| 4-1906014-0 | CA 2.0MM OFNR 50/125,LC SEC YEL |
| ESC12DRTH | CONN EDGECARD 24POS DIP .100 SLD |
| LTC4010CFE#PBF | IC CHARGER NIMH/NICD 16-TSSOP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LTC4011CFETR | 制造商:LINER 制造商全称:Linear Technology 功能描述:High Efficiency Standalone Nickel Battery Charger |
| LTC4011CFETRPBF | 制造商:LINER 制造商全称:Linear Technology 功能描述:High Efficiency Standalone Nickel Battery Charger |
| LTC4011EFE | 制造商:LINER 制造商全称:Linear Technology 功能描述:High Efficiency Standalone Nickel Battery Charger |
| LTC4012 | 制造商:LINER 制造商全称:Linear Technology 功能描述:High Effi ciency, Multi-Chemistry Battery Charger with PowerPath Control |
| LTC4012-1 | 制造商:LINER 制造商全称:Linear Technology 功能描述:High Effi ciency, Multi-Chemistry Battery Charger with PowerPath Control |
发布紧急采购，3分钟左右您将得到回复。