Mitsubishi microcomputers
M16C / 6K7 Group
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
Description
1
Rev.1.0
Description
The M16C/6K7 (144-pin version) group of single-chip microcomputers are built using the high-performance
silicon gate CMOS process using a M16C/60 Series CPU core and are packaged in a 144-pin plastic molded
QFP. These single-chip microcomputers operate using sophisticated instructions featuring a high level of
instruction efficiency. To communicate with host CPU, the LPC bus interface is built in. In this way, this MCU
can work as slave controller in the personal computer system.
The specification is target oriented specification for the development of M16C/6K7 (144-pin version).
Features
Memory capacity .................................... ROM (Refer to the figure of ROM Expansion)
RAM 3K bytes
The Min. time of instruction execution ... 125.0ns (f(XIN)=8MHz, with 0 wait, Vcc=3V)
Supply voltage ....................................... 3.0 to 3.6V (f(XIN)=8MHZ with 0 wait)
Low power consumption ........................ Target 41.3mW ( f(XIN)=8MHZ, with 0 wait, VCC = 3.3V)
Interrupts ................................................ 36 internal and 15 external interrupt sources, 4 software
interrupt sources; 7 levels (including key input interrupt)
Multifunction 16-bit timer ........................ 5 output timers + 6 input timers
Serial I/O ................................................ 5 channels (3 for UART or clock synchronous, 2 for clock
synchronous)
DMAC .................................................... 2 channels
Host interface ......................................... LPC bus interface X 4
A-D converter ......................................... 10 bits X 8 channels (Expandable up to 10 channels)
D-A converter ......................................... 8 bits X 2 channels
Comparator circuit ................................. 8 channels
PWM ...................................................... 14 bits X 4 channels
Watchdog timer ...................................... 1
I2C bus interface .................................... 2 channels
Serial interrupt output ............................ 6 factors (2 fixed factors, 4 programmable factors)
PS/2 interface ........................................ 3 channels
Programmable I/O ................................. 129
Input port ................................................
_______
1 (P85 shared with NMI pin)
Clock generating circuit ......................... 2 built-in clock generation circuits
(built-in feedback resistor, and external ceramic or quartz oscillator)
Applications
Notebook PC, others
Specifications written in this
manual are believed to be ac-
curate, but are not guaranteed
to be entirely free of error.
Specifications in this data sheet
may be changed for functional
or performance improvements.
Please make sure your manual
is the latest edition.